Question about 2006 Chrysler 300

Open Question

Autostick feature isnt working in 2006 300c. Is there a fuse for this or a way to reset it? all other gear settings work fine, just no autostick out of nowhere.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood ddx373bt the red light flashes won't turn on. I pressed the reset button nothing works?


Check the 10 amp fuse on the rear of the radio. As its recieving a memory live power feed but not a ignition live feed hence the flashing red light. If the fuse isnt blown you need to then check the ignition live power feed cable as its probably open circuit did you use a wiring harness adaptor?

Apr 10, 2017 | Cars & Trucks

2 Answers

Gear shifter will not move from park


Check and see if you have brake lights. If not replace the brake switch down by the brake pedal arm. If you do have lights, then you need to check wires first, then replace the shifter. Most solenoids in the shifter can't be replaced with out replace the whole shifter.

Jun 10, 2015 | 2007 Jeep Compass 2.4

1 Answer

My autostick chysler 300M will not manually downshift


That may be a safety feature, Ron - it SHOULD refuse to downshift if downshifting would cause excessively high engine RPMs.

Aug 13, 2014 | 2000 Chrysler 300M

2 Answers

Ac will not work on high in 2004 isuzu rodeo


What is near the motor? This isnt working on HIGH. So its not a resistor. If that is what you are talking about? High isnt connected to a resistor. Its direct power so what would changing the resistor do if the only possible problems are fuse, relay or switch? If it worked on HIGH and not setting one through three then yes it would be the resistor on the ac blower motor if it is still powering on when tested on the low settings.

Jul 20, 2012 | 2004 Isuzu Rodeo

1 Answer

Way to high RPM and does not kick in over drive.


Regardless of engine, your trans is a 42RE, I'm assuming your have
1st,2nd 3rd, rev, gears, is there any tranny codes, is your car autostick feature,
this could be sensor related, wiring, or internal clutch defect. If you can be
more specific, I will help you out on this problem. PS, 2nd and 3rd gear use
same clucthes to give OD.
GOOD LUCK, RDJRP.

Apr 15, 2011 | 1995 Dodge Intrepid

2 Answers

I replaced battery, now radio isnt working. Fuses are fine


refair to manual and look for re sinkerniseing key code hope this helps?

Aug 25, 2009 | 2002 Mazda Tribute

1 Answer

Cruise control will not come on.


First I would try and replace the #1 fuse which is a 10 amp fuse that powers the Transmission Controller, Gauges and Autostick. If that fuse is good let me know.

Mar 19, 2009 | 2003 Dodge Intrepid

Not finding what you are looking for?
2006 Chrysler 300 Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...