Question about 2002 Ford Explorer

2 Answers

Service engine soon light on - codes P0171, P0174, P1131 and P1151 on a 2002 4.6L V8 Does this combination of codes focus on a particular emission component?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My 2000 ford ranger is showing codes p1131&p1151 and it says it is a manufacturer control fuel air metering.what are they talking about.thanks

Posted on Jul 14, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,382 Answers

Hi, 1151 is an 02 sensor code, 1131 is also 02 sensor code,
0174 lean condition bank 2, and 0171 is lean bank 1. Either this is in need of a whosale of repairs or you have computer issues, From looking at the codes i would first do a complete tune up, Including wires, And inspect for a vacume leak before replacing any 02 sensors..
Take care

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 GMC SIERRA 1500 4X4 CODES P0171 AND P0174 CHECK ENGINE LIGHT IS ON WONT PASS EMISION


Sometimes this is NOT a O/2 sensor issue ,,,,,If the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persist the front oxygen (O2) sensor may need to be replaced.
The P0171 code could also be caused may be caused by one or more of the following: debris on MAF sensor causing an incorrect reading, improper oil level, low or high fuel pressure or Engine Control Temperature (ECT) Sensor reading inaccurate,,,,,

Mar 24, 2015 | GMC Cars & Trucks

1 Answer

Chevy Silverado error p1151


P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2


p1131 p1151 p0171 p0174 p1131 p1151 p0171 p0174
All of these p1131 p1151 p0171 p0174 codes indicate a problem with a lean condition. This engine is known for vacuum leaks, so before you start throwing oxygen sensors at the problem, it pays to perform some diagnostics.
Start by cleaning the MAF sensor. Spray the sensor with CRC MAF sensor cleaner. Next, check the plastic vacuum lines, especially where they meet with rubber boots. If they are cracked or the rubber is swollen, replace the line. Then check the rubber elbow that holds the PCV valve. That elbow is a know failure point. In fact, the entire PCV tubing is a trouble spot on these engines. (thanks Ford).
After you've checked for vacuum leaks, check the operation of the oxygen sensors. The easiest way to do that is to disconnect the sensor from the harness. Connect one lead of your digital voltmeter to the black wire on the sensor and the other lead to battery negative. Then start the engine and add fuel (either propane, starting fluid, or carb cleaner) into the throttle body to force the mixture to rich. You should see a corresponding increase in voltage as you add fuel (from 0 volts to slightly less than 1 volt). Start and stop the fuel enrichment and watch the meter to see if the volts drop as you stop adding fuel. If you see no change, the sensor is dead. Replace it.
You can also use the fuel enrichment procedure to locate intake gasket leaks.
P1131 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 1
P1151P1151 Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank No. 2
P0174 system lean bank 2
P0171 system lean bank 1


This is the only info that didn't come back directly to FORD (yet still mentions it) instead of GM. Not to sure you got the correct code.

Jul 08, 2014 | 1999 Chevrolet Silverado 1500

2 Answers

I have a 2001 Jimmy with "Service Engine Soon"


P0171 System too lean bank 1
P0174 System too lean bank 2

Last time you changed your fuel filter?
Look for any vacuum leaks.

Sep 05, 2011 | 2001 GMC Jimmy

2 Answers

2000 Lincoln Navigator - few days ago started idling very rough when truck is at a stop or in park. Service Engine Light came right around time I noticed that it was idling rough when stopped. Following...


P1131 Lack of HO2S-11 Switch ,Sensor Lean
P1151-Lack of HO2S-21 Switch ,Sensor Lean
PO171- System to Lean (Bank 1)
PO174-Systen to Lean (Bank 2)

Fuel Filter -Plugged
Low Fuel Pressure
Evap System -Leaks
Leaks - in ducting,air filter to throttle
PCV -Leaks
Exhaust System -Leaks
O2 Sensors-worn out

Apr 06, 2011 | 2003 Lincoln Navigator

3 Answers

OBD Codes P0401; P0171; P0174. EGER valve sensor vacuum tube winds up upon starting; will not idle. What have others found to be the issue? EGR sensor has gotten very hot and plastic tube connectors have...


p0401 egr flow insufficient. p0171 system to lean ( bank 1 ). p0174 system to lean ( bank 2 ). common problems that trigger p0401--
  • Restriction in the EGR passages, usually caused by carbon buildup
  • The EGR Valve is defective
  • Lack of proper vacuum or electrical signal to the EGR valve
  • Malfunctioning EGR Vacuum supply solenoid
  • Lack of proper EGR system feedback to the computer from the:
    • Manifold Absolute Pressure Sensor (MAP)
    • Differential EGR Pressure Feedback Sensor (DPFE)
    • EGR Valve Position Sensor (EVP)
    • EGR Temperature Sensor - p0174--
    • In the vast majority of cases, simply cleaning the MAF sensor does the trick. Consult your service manual for it's location if you need help. I find it's best to take it off and spray it with electronics cleaner or brake cleaner. Make sure you are careful not to damage the MAF sensor, and make sure it's dry before reinstalling also
    • Inspect all vacuum and PCV hoses, replace if necessary
    • Check for a dirty fuel filter and proper fuel pressure p0171- and p0174 are about the same.

Mar 08, 2011 | 2000 Ford Expedition

2 Answers

How do i fix emission codes p1131 p1151 p0171


TSB
05-22-6
ISSUE:
Some 2001-2003 F-150, 2004 F-150 Heritage and 2001-2003 E-150/250 vehicles equipped with a 4.2L engine may exhibit the malfunction indicator lamp (MIL) on with diagnostic trouble codes (DTCs) P1131 and/or P1151 (system too lean bank 1 or 2). This condition may be due to leaking isolator bolts/port gaskets in the upper-to-lower intake manifold mounting area. This condition is sometimes intermittent and may not be apparent on a warmed-up engine.


SERVICE PROCEDURE

Perform a self test. If DTC P1131 and/or P1151 are the only codes stored in the powertrain control module (PCM) proceed to Step 2. If any additional DTCs are present, follow normal diagnostic procedures found in the PC/ED Manual.

Remove the upper intake and replace only the port gaskets (9H486) and isolator bolt assemblies (9S479). The new isolator bolt assemblies use a rubber material that is green in color, do not install the old isolator bolt assemblies with the black rubber material. Do not replace any other intake parts or gaskets.
While the upper intake manifold is removed, check the exhaust gas recirculation (EGR) orifices that are pressed into each primary port of the lower intake manifold. If any of the orifices are plugged with soot, clean and unplug them with a pick and solvent.

PART NUMBER PART NAME
1L3Z-9H486-AA Port Gasket
3F2Z-9S479-AA Isolator Bolt

Jan 13, 2010 | 2003 Ford F150 Regular Cab

1 Answer

Engine service light illuminated. Diagnostic revealed P0171 and P0174 what does that mean?


code P0171 P0174?? sorry these are not nissan codes but the code readers own codes so return to where the reading was done and ask them

Dec 14, 2009 | 2000 Nissan Maxima

1 Answer

Poor idle dtc P1151, P1131,P0174, P0171. runs ok


Change plugs, and Mass Air Flow sensor. This should do the trick

Nov 29, 2009 | 2003 Ford Taurus

2 Answers

2000 Lincoln Navigator with rough idling and service engine light


i had the same trouble, there is a rubber boot under the cover on the top of the motor, it is coming from the egr valve, takes about 5 mins to repair and less than 5 dollars.

Jul 21, 2009 | 2003 Lincoln Navigator

2 Answers

98 E-250 Rough Idle; codes p0156,p1131,p1151,p0301,p0171,p0174+


po301 thru po306 all misfire codes cylinder 1-6 remove plugs and replace them..... set the plug gap first
i suggest u replace the wires also if they never been replaced all these misfire codes can set the others and one is for the oxygen sensor ( 02s or HO2S) CIRCUT MALFUNCTION do u know how to check wireing systems
do the tune up plugs (set gap) .052-.056 change the fuel filter also. clear the codes hows it run
this info is for 98 E-250 4.2Litre
what engine do u have 4.2L or 4.6L i know it is a v-6 by the codes

Dec 15, 2008 | 2003 Ford E250

Not finding what you are looking for?
2002 Ford Explorer Logo

1,356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...