Question about 1995 Ford F350

1 Answer

Where are the fuses for the turn signals. Have the manual but cant find location! My left turn signal is not working on the motorhome

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

IF A FUSE WAS BLOWN BOTH SIDES WOULD BE INOPERATIVE ,, MOST LIKELY A BLOWN BULB OR CONNECTION PROBLEM OR POSSIBLE SWITCH MALFUNCTION . TURN FLASHERS ON AND SEE IF BOTH SIGNALS WORK WHEN REPLACING BULBS USE DIELECTRIC GREASE TO PROTECT AGAINST CORROSION

HOPE THIS HELPS

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

4 Answers

Turn signal lights don't work


The first place to start are fuses, check your owners manual for location, typically left side of dash.

The emergency (hazard) flashers and turn signals are on separate fuses and run through the hazard switch. If all the lights work when the hazard switch is on then the problem will likely be a blown turn signal fuse.

Other possibilities are the hazard switch itself is bad, the turn signal switch is bad or a broken wire, all of which require a meter (or test light) wiring diagram and knowledge of the circuit to test it - better to have it done.

Robert Grove
Mobile Mechanic Malibu 310 651 8020 Auto Truck RV Mobile Repair...

Aug 09, 2014 | 2002 Chevrolet Impala

2 Answers

Turn signal


Flasher

1997 Chrysler Sebring 2.5L MFI 6cyl

The Flasher is located:

Behind A/C and heater control panel, in center console

Dec 09, 2013 | 1997 Chrysler Sebring

1 Answer

2000 towncar signals stopped working?


There should be a turn signal fuse in the fuse box inside the car, and there is a flasher for the hazards and one for the turn signals.
Check your owners manual for more info.

Aug 25, 2012 | 2000 Lincoln Town Car

1 Answer

No trailer turn signals tail lights work . you


If it is a factory trailer package then there are fuses for the left turn signal and the right turn signal for the trailer connector. Check your owners manual for the location of these two fuses.

Bob

Apr 21, 2010 | 2002 Ford Explorer

1 Answer

2000 Town/country left turn signal


Good chance it's just a bulb problem, start there & clean socket good & replace bulb. If that doesn't cure it, get back to us.

Jun 24, 2009 | 2000 Chrysler Town & Country

1 Answer

Turn signals on 2000 volvo v40 not working


located in passenger compartment fuse and relay box

May 26, 2009 | 2000 Volvo S40

2 Answers

Where is the flasher for the turn signals in a 1999 ford explorer


The 2 fuses are no 10 (7.5amp) and no 21(15amp) in the interior fuse panel.The flasher is located on the base of steering column under dash. See this this pic find connector c214 on bottom 3rd from right.
http://i253.photobucket.com/albums/hh43/chuck943/EXN15113.gif

Mar 14, 2009 | 1999 Ford Explorer

3 Answers

Flasher or turn signal switch


When you select left or right do any of the bulbs come on? If you select left check front and back left side if one of the bulbs did not come on the flasher will not work. Change the bulb that is out. Same with the right. If the fuse for the turn signal is good (check fuse or replace do not use visual, some appear to be good but are not).
The emergency flasher is different from the turn signal flasher. Look at manual for location of turn signal flasher. If you manually lift and lower turn signal control you may hear a clicking under the dash to locate the flasher.

Jan 02, 2009 | 1995 Chevrolet Caprice Classic

1 Answer

Turn Signals


The body control fuses are located in the left hand side when the driver door is open. The panel just pops off. All fuses are labeled. Do the signals work on the outside? This would tell me that the dash has been off for service and not replaced properly....accordianman

Jul 29, 2008 | 2002 Chrysler Concorde

Not finding what you are looking for?
1995 Ford F350 Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...