Question about 1989 Ford F 150

1 Answer

Plenty of fire. Will not start. Fuel pump and filter working.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I had that problem, if your truck has dual tanks there is a dual tank reservoir....the lines from the tanks run into it before going into the electric fuel pump. It can't be repaired and the only place to get one is from a ford dealer and they run around 200.00..I just did away with the reservoir and hooked it up to just use the front tank. Hope this helps.

Posted on Sep 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Some times engine will not start i have to turn ignition of &on several times before starts fuel pump and filter been replaced. there is plenty of fuel preasure. fuel is reaching cylinders


What make , model an year vehicle ? You need to explain a little better what's happening ! When you turn the key to the start position what happens ? Does the starter spin the engine ? The engine doesn't start an run ? A crank no start or no-crank no start ? How do you know there is plenty of fuel pressure ? Did you hook - up a fuel pressure gauge ? An how do you know fuel is reach cylinders ? Did you do fuel injector fire test ?

Sep 02, 2016 | Cars & Trucks

2 Answers

How do you test a 1994 Suzuki Sidekick fuel pump & where is the gas filter located?


Have you checked your fuses? It sounds like an ignition control module possibly. Start with the easy stuff before ya get crazy with the fuel pump. You can pull the fuel line off the throttle body and have someone try to start it to see if it's pumping. It's pressurised though and it will push a ton of gas through it really quick so be careful.

Mar 17, 2015 | Suzuki Cars & Trucks

1 Answer

My 2008 Ford Focus won't start no fuel delivery to filter is this the fuel pump if so where is it located on the car?


is the filter plugged to the point of not allowing fuel flow. if its good then the problem is with the fuel pump either the pump itself or an electrical problem with the wiring or plug.

Feb 21, 2015 | 2008 Ford Focus

1 Answer

My 2004 kia sorento 2.5 diesolhas plenty of fuel turnd over but will not start


When you say plenty of fuel...where is this plenty of fuel?
remember Diesel engines fire from the heat of compression - not spark. Also, fuel may be getting to injector pump but pump may not be working correctly.

Feb 19, 2015 | 2004 Kia Sorento

1 Answer

My Ford turbo 7.3 diesel will crank with started fluid but not with out? Alford,FL


Are the preheaters working,(glow plugs,intake air heater,depends on year of diesel)

May 05, 2017 | Cars & Trucks

1 Answer

Driving down road in blazer and it shuts off. Won't crank up. Plenty of fire


They have been making blazers since the 1960s so i do not know if it is FI or Carb? I take it you mean cranks but won't start?? If you have "plenty of fire" it has to be a fuel problem.. Possibly bad fuel filter, pump shutting off, bad pump relay.. trash in tank clogging fuel pick-up.. Check for fuel pressure?

Jul 19, 2014 | Cars & Trucks

1 Answer

I have an 04 colorado. I just put a new fuel pump and filter in it. Now it wont start I drained all the old gas out and put fresh gas in. I hear the fuel pump working and checked to see if I had fuel...


If you have gas, and the fuel pump is working, all i can suggest is cycling the ignition on and off several times to fill the system. Don't turn the engine over, just turn the key on until the fuel pump cuts out, and repeat. Do this several times. If gas is the problem, it should fire up. If it doesn't, better check for spark. Let me know how you make out.

Jul 16, 2011 | 2005 Chevrolet Colorado

2 Answers

Starts and will idle but smothers down and will not take fuel. It seems to have plenty of fuel pressure. Also does the same cold or hot. Installed two new fuel pumps...


replace your crankshaft postion sensor and cam sharf position sensor they tell you car when to fire spark and to what cylinder to fire to they work hand in hand also check your spark it should be blue not orange if orange replace distributor and rotor

if this helps please give me good rating

May 06, 2011 | 1986 Ford Bronco II

1 Answer

6 cyl 2.9. drove to work fine. turned off. 15


all i can say is check for power and ground at the fuel pump. get someone to turn the key to the on position (not crank!) and use a test light to see if you are getting power.

Aug 27, 2009 | 1987 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...