Question about 2000 Nissan Maxima
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are 2 kinds of speed sensors:
wheel speed sensors which are mounted behind each wheel and tied in with the abs brake system,
Vehicle speed sensors which are screwed into the side of the transmission/trans axle, which operates the speedometer.
Posted on May 15, 2010
bank 1 refers to the side of the engine that #1 cylinder is on , and sensor 2 refers to downstream , after the catalytic converter. , this link shows bank 1 on a 2001 nissan maxima V6 being on the firewall side . if you had a 4 cylinder it would be downstream after the catalytic converter .
Posted on Jan 04, 2009
You need to remove all of the air intake and other things behind the battery. The start motor is held in with two bolts. You might need a breaker bar to break loose the one bold as I did. Once you remove all of the air intake equipment. This will help you gain access to the starter motor. You might not need to remove all the air intake equipment I know it made it alot easier for me to remove the starter and I took it to the auto store and had it tested.
Posted on Apr 07, 2009
SOURCE: 1996 Nissan Maxima oxygen sensor
hye there ,,there are 3 o2 sensors on your car,,one for each bank,,,and the 3rd sensor is located after the cat this one usually goes first,,,,just make sure you no if your cars an import or not as they can be different,,,then you should be safe when ordering ,,hope that helps,,,
Posted on Apr 24, 2009
There are two speed sensors one is called a revolution sensor that is located on the case of the transmission. You can take the driver side wheel off and see the sensor on the top of the case of the transmission. A 10mm bolt is holding it in. Easy fix
Posted on Jun 17, 2010
Tips for a great answer:
Aug 28, 2016 | 2007 Nissan Maxima
Jul 25, 2015 | Nissan Cars & Trucks
Feb 19, 2015 | 2000 Nissan Maxima
Aug 22, 2014 | 2000 Nissan Maxima
Jul 21, 2014 | 2001 Nissan Maxima
Jun 27, 2012 | 2000 Nissan Maxima
Jun 29, 2010 | 2000 Nissan Maxima
May 20, 2010 | 2000 Nissan Maxima
May 15, 2010 | 2000 Nissan Maxima
412 people viewed this question
Usually answered in minutes!