Question about Mercedes-Benz CLK-Class

2 Answers

CLK 430 license plate illuminator lights; how do you change them?

Posted by on

  • firstchoices Aug 08, 2010

    The lights I am referring to are above the rear license plate and appear to be LED.?. One side doesn't illuminate, the other does. There are 3 screws on that panel but am not sure if that's the proper way to remove to replace...

  • firstchoices Aug 09, 2010

    Thanks for the solution :-)

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Turn the socket counter clockwise to remove it. Then the bulbs just pull out. You can get access to the bulb socket from the rear side.
Other types have two screws on the lens that you remove and then pull the bulbs out.

Posted on Aug 07, 2010

  • Nate Stansfield
    Nate Stansfield Aug 08, 2010

    Oh Ok, you have the LED bar that runs across. There should be a set of screws that hold it on. Not exactly sure how many. 3 or 4 screws will hold on the bar. Once the screws are removed you should then be able to lightly pry if off. It also has a light adhesive as well as the screws.

  • firstchoices Aug 09, 2010

    Yes, it is and I thank you for your help :-)

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 382 Answers

Open up the trunk and find the clips holding the trunk liner in place. remove the clips and liner will fold back giving you easy access.

Posted on Aug 08, 2010

  • firstchoices Aug 09, 2010

    Thanks for the solution. :-)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

04 Nissan maxima tail lghts don't always come on right away thought maybe headlight switch not sure need help


Download 2004 Nissan Maxima Lighting System Section LT PDF Manual 190 Pages Do you know how to do electrical testing with volt ohm meter ? Do you know what a BCM is ? COMPUTER !
Control of the parking, license plate, and tail lamp operation is dependent upon the position of the lighting switch (combination switch). When the lighting switch is placed in the 1ST position, the BCM (body control module) receives input signal requesting the parking, license plate, side marker and tail lamps to illuminate. This input signal is communicated to the IPDM E/R (intelligent power distribution module engine room) across the CAN communication lines. The CPU (central processing unit) of the IPDM E/R controls the tail lamp relay coil. This relay, when energized, directs power to the parking, license plate, rear side marker and tail lamps, which then illuminate.
Testing starts at 134

Feb 05, 2017 | 2004 Nissan Maxima

1 Answer

How do I remove the lens to Change backup light 2001 clk 430 convertible


I believe you do not remove the lens - rather you open the trunk and find the back of the lamp (you'll have to remove the panel in front of it) and remove and change the bulbs from inside the trunk.

Feb 13, 2015 | 2001 Mercedes-Benz CLK-Class

1 Answer

Change license plate lights


remove the plastic cover on the car boot. There is some screws that you need to remove front the plastic cover to get access to the lamps that illuminates the licence plate.
Replace the small lamps and voila !!!

Feb 10, 2015 | 2006 Ford Focus

1 Answer

Something in my engine clicks on and off when my trunk is open and my dash lights flicker on and off in my 2001 430 CLK


Yes i have had this before its because you have connected the wires wrong and used the feed for the lights ,cannot tell you the colours as i cannot remember and iam colour blind but this is whats wrong your 12v switchable feed what you think is the feed from the ignition is actually your illumination feed for the radio ,if in doubt run a new wire from the ignition switch direct to teh radiop this will cure it i promise ,Sorry i cannot tell, you what wire is what but when the reds and greens all look the same ?? you understand my plight but this is your problem i do know for sure as done two motors like this in the last few years .

Jan 22, 2012 | 2001 Mercedes-Benz C-Class

1 Answer

What is the code for the radio for a 2002 clk 430


The only way to get a code for the radio is from the dealer. Give them your license and registration to show the vehicle is yours. Then they will give you the code. This is for free, so dont let them charge you money.

Dec 10, 2010 | 2003 Mercedes-Benz CLK-Class

1 Answer

2001 CLK 430 A/C Problem


Hi Joe here, The problem with your a/c is a sensor. Most likely the pressure sensor. You need to have the vehicle scanned to find out which sensor it is. 

Mar 21, 2009 | 2006 Mercedes-Benz CLK 500

1 Answer

Need to change license plate light on 2004 F150


Try turning the socket that holds the bulb to the left and pull it out to get to the bulb some times these get so hot that they start to melt so it might be hard to turn

Mar 13, 2009 | 2004 Ford F150

1 Answer

How do i change the light bulbs that illuminate the license plate?


If the car is a hatch back, there is a access panel in the middle of the interior panel, you should be able to access them from there, its a tight squeeze. If its just a four door you can access them from inside the trunk.

Jul 01, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...