Question about 1999 Nissan Maxima

1 Answer

Need to replace the headlight bulb (drivers side) in my 1999 nissan maxima. what are the steps?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Using a flashlight or drop cord, look under left front fender or under hood, for a pull out receptacle which will be dirty, dusty, turn the unit left or right to remove from the headlight socket, remove bulb unit, install new bulb and reinstall the reverse of removal...

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low or high beams do not work on drivers side nissan 2000 maxima


Check the headlight plug first, see if you have 12 volts and a ground when the head light is turned on. You may just have a burned headlight connector.

Oct 14, 2012 | 2000 Nissan Maxima

2 Answers

How to change headlight bulb on 2007 nissan maxima


If you open the hood and look down behind the headlights, you will see a socket where the wires come in. Turn it counter clockwise and the bulb should pull out. Replace the bulb and reverse the process.

Mar 01, 2011 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

How do i replace a drivers side low beam headlight?


pop hood there is a screw that holds the plastic lens headlight assembly to car. unscrew it and lens assy will come off car then turn bulb housing 1/4 turn to remove bulb...replace in reverse

Feb 14, 2011 | 1997 Nissan Maxima

1 Answer

Replacing headlight bulb on 2006 maxima


Hello,

Replacing Your headlight bulb seem to be easy when You look at it, but quite technical. But If You get the proper guide, I think fixing this will not be difficult for You. You will be needing these instruments to fix this(Flathead screwdriver, Phillips head screwdriver, 3/8 inch drive ratchet, 3/8 inch drive 10 mm socket, Replacement bulb(s), Shop rags or towel), then You carefully follow the steps below to fix this:
  1. Turn the steering wheel all the way in toward the engine on the side you are changing the light bulb in. For the driver's side bulb replacement, turn the steering wheel all the way to the right. For the passenger side bulb replacement, turn the steering wheel all the way to the left.
  2. Turn the ignition switch to the off position and remove the keys. Make sure the light switch is in the off position.
  3. Remove the retaining clips and screws from the front of the wheel well area, including the bottom splash shield valance underneath the front of the Maxima. The valance is attached to the wheel well and can be left intact. Use the Phillips head screwdriver for the screws and the flathead screwdriver to pop up the center post of the clips and then pry the clips out. Remove enough of the clips to gain access into the front fender cavity.
  4. Locate and turn the outer low-beam headlight cover counterclockwise to remove it. This will reveal the bulb and socket.
  5. Turn the bulb counterclockwise to remove it from the headlight assembly.
  6. Release the retaining pin (if applicable for theft deterrent package).
  7. Remove the wire harness plug from the bulb socket and then remove the bulb.
  8. Insert the new bulb into the socket without touching the glass of the bulb. Reverse the procedure to reinstall.
But if it is the high beams bulb You want to replace, then please follow the steps below, It is the same instruments as before You will be needing to do this job.
  1. Release the hood latch if you're replacing the high beam bulb only. Then lift the hood. Locate the two 10 millimeter bolts at the top of the headlight assembly and remove them with the ratchet and the socket.
  2. Locate the four fascia retaining pins and remove them using the flathead screwdriver. This will allow flexible movement of the fascia to remove the headlight assembly.
  3. Place a shop rag or towel between the tight gap of the fascia and the bottom of the headlight assembly to prevent scratching the fascia.
  4. Maneuver the headlight assembly forward away from the front of the Maxima. There is a guide pin still retaining the assembly in place so apply equal parts of determination and gentleness to remove the assembly without scratching the lens or the fascia.
  5. Remove the headlight assembly far enough to get your hand behind it and remove the seal from the back of the high-beam headlight. Turn the seal counterclockwise to remove.
  6. Turn the bulb counterclockwise to remove from the assembly.
  7. Release the retaining pin (if applicable).
  8. Unplug the wire harness from the light bulb and remove the light bulb.
  9. Plug the new replacement bulb into the wire harness without touching the glass of the bulb.
  10. Reinstall by reversing the procedure.
Hope this information helped. Thank You for using FixYa!!!

Jan 15, 2011 | 2006 Nissan Maxima

2 Answers

How do I replace the bulb on the drivers side headlight in a 2004 Nissan Maxima?


On most newer cars, the bulbs come out from the inside of the car. You will have to open the hood and look at the lights from this way. Your bulbs should be "twisted" in and you should have no problems taken them out. Just turn them to the left or right (depending on the car) and take them out.

Dec 30, 2010 | 2004 Nissan Maxima

2 Answers

I don't know how to take off the head light lens cover on my nissan maxiuma


Probably not a lens cover at all. It's just a 1 piece plastic headlight. It you are wanting to replace a bulb , they go in from the back . Open the hood and you should be able to see where the wires to the bulb go in the back of the headlight.

Nov 06, 2009 | 1997 Nissan Maxima

1 Answer

1992 nissan maxima se. my right headlight doesn't


check all fuses , they sometimes pop fuse when bulb blows.good luck.

Oct 26, 2009 | 1992 Nissan Maxima

1 Answer

I need to replace the driver side low beam headlamp bulb, but the bulb itself can't be removed. I have removed the battery for easier access. HELP !


The low beam bulb, drivers side, can be replaced by removing the entire headlight assembly, unplugging the electrical connection to the bulb, "pinch" the retaining clip on the bulb and the bulb comes right out. The only problem is the cost of the bulb---about $ 140. The replacement took about 45-50 minutes to complete.


Jun 13, 2009 | 2003 Nissan Maxima

Not finding what you are looking for?
1999 Nissan Maxima Logo

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...