Question about 1999 Mercury Mystique

Open Question

How to replace the lower right ball joint on a mercury mystique

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1056 Answers

SOURCE: Right lower ball joint. Torn loose

If you torn the ball joint out, you very well could have more damage.
If you plan on doing the work yourself, I would put the car up on stands, and take the front wheel off, and do a through examination of the whole assembly.
Once you have a complete assesement of all of the damage you can go to your local parts house and get the parts.
If you have to replace the lower arm, you will need probably need some specialized tools (like a spring compressor).
After you're done changing parts, you will need to get a front end alignment.

Posted on Jul 27, 2008

Ad

SOURCE: 2000 Mercury Sable Ball Joint?

wheel bearing. Lift the car so the wheel is not supported and twist it up nd down,, then right and left. You will feel the play.

Posted on Aug 05, 2008

  • 337 Answers

SOURCE: Lower Ball Joint Removal and Replacement

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801edd39

Posted on Dec 08, 2008

  • 408 Answers

SOURCE: replace lower ball joints

if you have some mechanical knowledge, it is not really difficult.  It is just time consuming.  Pick up a Haynes manual and they will give you a step by step with pics in doing this.

Posted on Mar 07, 2009

chrischronic
  • 235 Answers

SOURCE: lower ball joint broke on a 95' lincoln towncar

it must be pressed out with a ball joint press then new one pressed back in. this job is for a machanic

Posted on Apr 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zerk fitting locations on 1997 Mercury Grand Marquis


There may not be any. Most manufacturers are putting 'permanently lubricated' joints in the front suspension for upper and lower ball joints, tie rod ends, and control arms. Also for universal joints in the drive shaft(s). If you have had replacements for any of these components, they may have a zerk fitting, and it will be located right on the joint being lubricated.

Jul 22, 2017 | Mercury Cars & Trucks

1 Answer

How to replace a lower ball joint on 2004 mercury mountaineer?


Remove the brake caliper by removing the two bolts that connect it to the steering knuckle. Remove the lower ball joint cotter pin and retaining nut. Pry the steering knuckle up and away from the lower ball joint. Unscrew the grease fitting from the bottom of the lower control arm. Press the lower ball joint out of the control arm using a ball joint remover set.
Press the lower ball joint into the control arm using a ball joint installation tool. Remove the block of wood supporting the upper control arm. Install a new cotter pin through the ball joint stud.Install the grease fitting on the bottom of the ball joint. Use a c-clamp to push the piston back into the brake caliper. Reinstall the wheel assembly. Here you can find the quality parts http://www.buyautoparts.com/steering_system.htm

Aug 29, 2011 | Mercury Mountaineer Cars & Trucks

1 Answer

How to replace lower ball joint on a 2002 mercury sable


THE LOWER BALL JOINT IS AN INTEGRAL PART OF THE STEERING KNUCKLE.IF LOWER BALL JOINT DEFECTIVE YOU HAVE TO REPLACE ENTIRE STEERING KNUCKLE.

Jul 17, 2011 | 2002 Mercury Sable

1 Answer

I need to replace a mercury villager lower ball joint.


If you go to YOU TUBE you will see
the ball joint R&R done in a repair shop
& will learn alot & know what has to be done

Jun 09, 2011 | 1996 Mercury Villager

1 Answer

How do i replace a tie rod end on a 1999 mercury mystique


get you self a spreader designed for that job where you get the tie rod end, spray the threaded ends of the old one with pb blaster. place the spreader between the ball end and tap til the joint comes apart...I got ahead of myself,,,,THE VERY FIRST THING THIS TO DO IS TO MARK WELL THE POSISTION OF THE END OF THE OLD TIE ROD SO YOU KNOW HOW FAR TO TIGHTEN THE NEW ROD...MOST PEOPLE GET THEIR CARS RE-ALIGNED AFTER THIS PROCEEDURE...I DON'T

Mar 04, 2010 | 1999 Mercury Mystique

1 Answer

I cant separate the ball joint from the spindle on my 2000 mercury mystique


you need a ball joint fork, this goes between the spindle and the balljiont then you hit it with a hammer to split, also a assume you removed the bolt from the spindle holding the balljoint,

Jan 24, 2010 | 1999 Mercury Mystique

1 Answer

How to change lower ball joint on 95 mercury cougar...do you have to take lower countrol arm off to get ball joint out?


i would replace the whole control arm because the bushing are probably worn out too and it's easier than pressing out the ball joints. make sure you have a spring compressor tool when you do this or you could get seriously injured

Nov 16, 2009 | 1995 Mercury Cougar

2 Answers

My ball joint poped in my 1994 Mercury Cougar, 2 door coupe. How do I repair, and estimate cost.


replace the lower control arm. control arm costs 60.00-90.00 bucks and 200.00 apprx. on labor.
do you have a friend or relative. that can get this done for you ?


hope2help shack

Apr 19, 2009 | 1994 Mercury Cougar

1 Answer

How do I remove and replace front wheel bearing on 1998 Mercury Mystique????


you need to take the tie rod off , the lower ball joint off , take the strut bolt out and remove the nut and washer off the cv axel then pull the whole hub Assembly off then the new bearing need to be pressed in , then reinstall everything not as hard as it sounds

Mar 09, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
1999 Mercury Mystique Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...