Question about Jeep TJ

1 Answer

When i push the brakes the right side dash turn signal indicator comes on also when signal ison for rightside when braking turn signal dont blink also when you turn on right signal left rear signal flashes also Ive disconnected trailer hitch harness that didnt help ive cleaned connections at the blinker and rear light connection. the problem started when i had the top off in a rain storm last summer but temporarly fixed its self this winter

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

You have lost ground to the right light unit, good luck

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake light trouble right side brake light will not come on but both flashers work also turn signals work older ford truck what could the problem


I have to think the problem is inside the turn signal switch, a poor internal connection. You know the brake signal first goes through the turn switch before it goes to the bulbs. That is why the brake lights and rear turn signal lights share the same filament in the bulb, and the same wire going to those lights. The only difference is the turning side light is affected by the turn signal flasher, causing blinking, while the other side- the non turning side-does not go through the flasher relay, but straight to the bulb from the turn signal switch. Change your turn signal switch and I believe you will solve the problem. Let me know, okay?

Sep 16, 2015 | Ford Cars & Trucks

2 Answers

07 Impala rear driver side brake light and turn signal does not work, but when I checked the bulb it was working just not when I press the brake. The left turn signal on the dash also blinks rapidly.


Sounds like a possible bad ground connection.
Make sure the contacts for the bulb are clean.
Make sure the cround connection is not corroded.

May 21, 2015 | 2007 Chevrolet Impala

1 Answer

1995 Chevy Caprice Wagon, right side signals and brake lights dont work


change the bulb if still out then check and test socket/ground wiring/wire harness for damage

Apr 28, 2017 | Cars & Trucks

1 Answer

Brake/Signal Lights Problem.


Sounds like a ground problem to me. Bulbs are not getting there ground to complete the circuit so they backfed through the other bulbs.

Oct 23, 2012 | 1998 Acura RL 3.5

1 Answer

2005 Nissan Frontier...when I step on the brakes my right turn signal comes on but doesn't blink? when I turn on the Left turn signal and step on the brakes, it blinks just fine! What's causing this?????


If the turn signal bulbs are the same as the turn signal bulbs it would indicate the brake light on the left is not working. If the brake lights AND the right turn signal come on it could indicate a wire is getting a cross feed from an improper source. If you are comfortable with electrical systems - If you have a tow package you may want to check the wires to the trailer. Otherwise have it checked by an electrical shop.

Jan 30, 2010 | 1998 Nissan Frontier

1 Answer

Brake light, reverse light and turn signal issues


Hello. The symptoms you are describing are likely due to a poor ground. Temporarily install a new ground wire by securing a piece of copper wire to the frame with a self tapping screw. Use this ground wire along with the hot wire to see if each of these lights works. If it does, trace the ground wire back to the frame, unscrew it and clean up the metal with emery cloth so you reestablish a good ground.

Jan 28, 2010 | 2003 Ford Windstar

1 Answer

89 Chevrolet K1500 tail light issues


change the brake light switch ,or rewire the whole lot to europeon standard where its all seperate.Stupid american idea where the brake light is used as the indicator as well.Had a few like this to import and had to rewire the whole rear back lights as their is some fancy brake light switch on these cars with a whole lot of wires .i just cut the whole bunch and rewired the lot as our regulations do not permit this type of concoction.best of british with it though as although its not difficult to do its amazing how many so called mechanics run when they more than two wires

Feb 19, 2009 | 1989 Chevrolet K1500

3 Answers

Turning signals dont blink


Problem is the Turn Signal "FLASHER" unit, 1.Turn on Emergency FLASHERS 2. Go under Dash while they are on Listen -for Clicking sound then feel for it 3. Should Be a Silver Round Unit About as Big IN ROUND as Half dollar coin 4. ok now Look Around for the SAME EXACT Thing Clipped onto Something Under dash At Driver side Usually Between Steering wheel and Center HUMP in Floor, 5. once you find it Take OUT the first One you Found Emergency FLASHER) and 6. Put it In Place of Turn Signal Flasher, 7. Turn off Emergency Flashers- Turn Key in "ON" Position but don't start then Try Turn Signals. Yaaaa !!!! they work ?? LoL hopefully this Does the trick, if they work Buy new one and Replace Always Use NEW For TURN Signals as they are used Much More than Emergency Flashers. Hope this is Good Instructions For you and Helps you Solve The Problem, Please DONT Forget to RATE ME Thank you Rejakwilson@aol.com

Jan 18, 2009 | 1986 Oldsmobile Cutlass Supreme

1 Answer

Turn signals 2003 Ford F-150


Sounds like the turn blinker is shorted internally. Suggest you change it out, to test this.

My next check is that no wiring is melted and burned, such as can happen with any connection to tow a trailer. U-Haul has fine print that indemnify them of any problems they cause! have you towed anything recently?


Dec 25, 2008 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...