Question about Chrysler Imperial

1 Answer

Remote does not work - Imperial Chrysler Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 216 Answers

This could be caused from a dead battery in the remote to a defective remote. Orielly's Auto pats stores carry a remote tester that is capable of telling if the remote is functioning. You should replace the battery in the remote before attempting to test this.
If you find that the remote is functioning then you may need to look in you owners manual for instructions on how to reset or reprogram your remote to the key less entry system.

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote start quit working all of a sudden. The lights and everything comes on like its supposed to but it doesn't start. The remote still locks and unlocks


My Remote Car Starter Stopped Working! - DON'T PANIC!

www.mobileedgeonline.com > Remote Car Starters
This time of the year rarely a week goes by that we don't get a call from someone stating that their remote car starter stopped working. Nearly every call is the ...

So Your Remote Starter Stopped Working.... Just Relax!

www.wssdriveeasy.com/remote-starter-stopped-working/
Sep 29, 2013 - You press the button on a cold Winter day to find that your remote starter stopped working! Take a deep breath. It is probably something very ...

My remote starter is not working, how do I fix this? - Compustar

https://support.compustar.com/.../202533874-My-remote-starter-is-not-w...
When your vehicle's remote start stops functioning the solution can change depending on each situation. The Compustar remote will not...

Remote Starter Won't Start - YouTube

? 1:02
https://www.youtube.com/watch?v=EuHu2VFx0ks
Nov 4, 2012 - Uploaded by daniluchison
Remote controls sends signal to Remote Starter but after a few 'clicks' it won't start the ... 04-08 Pontiac ...

remote start problems - YouTube




Jan 14, 2016 | Cars & Trucks

1 Answer

94 full size blazer keyless remote doesn't work.


Does the spare remote work? Have you tried to reprogram it? These remotes are very cheaply made and prone to key pad failure. To program the remote click this LINK, if that doesn't work buy anew one on eBay for cheap.

Jun 13, 2012 | Cars & Trucks

1 Answer

My compustar remote start stopped working what can I do?


Try doing a re-learn on the remote. If you don't know how, go to "you tube" enter the model of remote and you'll most likely get the information you need to complete the task.

Jan 30, 2018 | Cars & Trucks

1 Answer

I have a 2003 dodge durango i dont have a working keyless remote how do i program the one I just bought from the dealership to work?


You must have one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.



1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.

3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.

4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the PANIC button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).

5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. Locks will cycle after each additional
remote is programmed.

6. Turn the ignition OFF and remove key.
7. Test Remotes.

Mar 01, 2011 | 2003 Dodge Durango

1 Answer

Need remote programming 2002 dodge neon


If you have a working remote the programming is as follows:
1. Turn the ignition switch to the 'run' position.
2. With the remote that works, press the UNLOCK button for 4 to 10 seconds.
3. Within that 4 to 10 second period, keep holding the UNLOCK button, and press the PANIC button for one second. Release both buttons. You will hear a chime, this means that the car is in remote programming mode.
4. Within 30 seconds of hearing the first chime, press any button on ALL remotes to be programmed (including the working remote). You will hear a chime after each remote is programmed.
5. Turn the ignition key to OFF.
6. Test all of the remotes.

If you don't have a working remote, you will need to go to a dealership to have them program one for you.

Dec 03, 2010 | 2002 Dodge Neon

2 Answers

Keyless Remote Won't Work - But Car Starts


The remote receiver unit is located in the rear view mirror. This may be faulty. Since the car is new (less than a year?) you still may have the factory warranty.

Jan 16, 2010 | 2009 Volvo S40

1 Answer

Power door lock remote won't work


Sounds like the remote is failing..

Jul 10, 2009 | 1998 GMC Safari

2 Answers

Power locks won't work from remote


make sure the button inside the remote makes contact with the outer plastic, might want to open it an try to press it an see if it works...!

May 28, 2009 | 2000 Ford Ranger SuperCab

1 Answer

Remote lock no longer works


replace remotes from dealer possible water damage in remotes

Apr 21, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...