Question about Volkswagen Beetle
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: i have a 1972 1600cc
The firing order for 1972 VW 1600 cc is: 1 - 4 - 3 - 2 .
See the wire diagram on the firing order in the picture below:
Please do rate my response. Thanks!
Posted on Feb 12, 2011
SOURCE: howto install weber carb
Remove the old carb. Bolt the new carb and gasket onto the manifold. Hook up the fuel line and clamp. Thread the throttle cable through the linkage and tighten. Have someone hold the gas pedal to the floor, look inside the carb and make sure the throttle plate inside the carb is full open. Next, wire in the electric choke, this should just clip on.
Now after the engine is running and warmed up...adjust the mixture and idle speed adjustments on the side of the carb. Is this a two barreled cab and does it have a manual choke?
Posted on Mar 25, 2009
Depending on your carb, distributor and transmission, you have from zero to two vacuum hoses.
If you have an Autostick transmission, there's a vacuum hose running from a port in the intake manifold to the control valve on the left side wall of the engine bay. (Hint: if you've got a car that came with Autostick and that someone's converted to manual transmission, the bracket for the control valve is the perfect place for your coil.) Most people don't have this transmission even if their car came with it--it's only a three-speed and it's hard to find parts for it, so most of those cars have been converted to manual transmission.
The other hose you might have is for your distributor. The port is on the left side of the carb, and a hose runs between it and the metal vacuum advance can on the side of the distributor. If you have a 009 distributor or an aftermarket distributor like an MSD you don't have the vacuum advance can; if you have an aftermarket carb like a Weber you don't have the port. Therefore...you probably don't have any vacuum lines on your engine.
if only one vacuum line then? the vacuum line goes from the vacuum advance on the side of the dizzy, to the carburettor, just around the throttle linkage if i recall. hope this helps.
Posted on Aug 11, 2009
For the 2.8L DOHC V-6:
Ignition Coil Connections
Let me know if this helped, or if you have additional information of questions. Feel Free to contact me at FixYa.com!
Posted on May 07, 2010
Tips for a great answer:
Aug 28, 2011 | 1999 Volkswagen Beetle
Aug 02, 2011 | Volkswagen Beetle Cars & Trucks
Jul 09, 2011 | 1998 Volkswagen Beetle
Mar 13, 2011 | Volkswagen Beetle Cars & Trucks
Feb 11, 2011 | Volkswagen Beetle Cars & Trucks
Jun 04, 2010 | 1998 Volkswagen Beetle
May 27, 2010 | 1994 Volkswagen Golf
Jul 30, 2009 | 2008 Volkswagen Beetle
Aug 15, 2008 | Volkswagen Scirocco Cars & Trucks
Oct 16, 2017 | Volkswagen Cars & Trucks
366 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: