Question about Chevrolet Blazer

1 Answer

My 1996 chevy s-10 blazer vin number W 4.3 liter v-6 vortec has spark good fuel preasure but stall when going down the road when it stalls still has spark and fuel preasure. but won't start until it cools down? one guy told me the EGR so i replaced it and it didn't work. any ideas

Posted by on

  • rickgeroux Aug 07, 2010

    thanks ill see what happens

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!

Main reasons why an engine stalls:

Fuel filter clogged and/or water or impurities in fuel tank.
Faulty fuel pump and/or fuel pressure regulator.
Faulty or incorrectly gapped spark plugs wires.
Vacuum leak at the trottle body, intake manifold or vacuum hoses.
If spark plugs were changed recently, check for correct firing order, it is easy to mix the spark plug wires when changing plugs.

The ignition colis fail when hot, and some times only one end fails and the other works fine, when cool down, they both work again, check spark to all coil terminals.

Remove spark plugs, one at the time to check it's condition.

Use a fuel pressure tester to check fuel pressure when engine doesn't want to start to check fuel pump performance.

Good Luck, keep me posted!

Remove spark plug

Posted on Aug 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1993 chevy blazer with the 4.3 vortec and when I start driving it looses power when I hit second gear starts jumping and acting like its gonna stall how do I fix this


if mtr is missfiring u may need 2 go through the ingnition system ie spark plugs leads/dizzy cap/rotorarm its also a good idear 2 replace the fuel & air filters or get it 2 a mechanic & have it run up on a tune scope.

Sep 10, 2011 | 1993 Chevrolet S-10 Blazer

1 Answer

1995 chevrolet blazer stalls when you slow down


try checking air cleaner box to be sealed or dirty air filter and try to clean mass air flow sensor also check for dirty air intake only clean mass with special mass cleaner . also look for vac leaks and fuel pressure .

Jan 28, 2010 | 1995 Chevrolet Blazer

3 Answers

Know if my 95 chevy blazer has a spider CPI?


A spider injector is located underneath the intake plenum and this is multi-port. Otherwise you have a throttle body injector system. Vortec engines have spider injectors and they are super expensive to replace ($400.00- 850.00) each ! There is only one spider injector for each engine it has 6 legs/fuel tubes that go to each cylinder.

Oct 10, 2009 | 1995 Chevrolet Blazer

2 Answers

1996 Blazer w/V-6 Vortec dies at op-temp. will restart. ongoing


I WOULD STILL CHECK THE FUEL PRESSURE.IF ALL IS GOOD.ENGINE GETTING TOO HOT WILL SHUT OFF.ALSO A LEAKING INTAKE GASKET WILL CAUSE STALLING WHEN HOT.

Jul 26, 2009 | 1996 Chevrolet Blazer

1 Answer

1996 Chevy S10 stalls out 3 times before steady start


check for loose or cracked vacuum lines, and/or the rotor. It may not be making consistant contact.

Oct 08, 2008 | 1996 Chevrolet Blazer

1 Answer

Fule pump


I bet you frequently run the truck very low on fuel if so you killed the fuel pump when you replace this pump its a good idea to use only a genuine AC DELCO FACTORY pump because the vortec engine needs a MININUM of 60 PSI fuel pressure to start
http://www.aceautomotive1.com

Jul 29, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...