Question about 2001 Chevrolet Impala

1 Answer

My 2001 chevrolet impala ls has a problem with the emergency hazard flashers. when I press the button to turn them on they come on and work fine, and when I press to turn them off, they go off ,but the clicking sound like they are still on keeps going. When I turn my key off the sound goes away but when I turn my key back on it starts up again. It sound like a blinker light, but it is my emergency flashers. The lights work, but when I turn it off the noise like they are on stays on.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,194 Answers

I swear this used to happen to me. I'd hit the top of the dash and it would stop. No lie

Posted on May 30, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 31 Answers

SOURCE: impala ls 2001 (coolant sensor)

the coolant sensor is screwed in so un screw it

Posted on Mar 08, 2009

  • 1 Answer

SOURCE: 2001 Chevy Impala won't start

If the battery has gone dead, it could cause the security system to go into full lock-up mode. If it has locked up the accessories will work after the battery is charged back up , but the power to the starter will be cut off and it wont turn over. You need to do the 30 minute learn procedure. A GM dealer will print it out for you and you can do it yourself. It's very simple if you follow the procedure exact. hope this helps and good luck.

Posted on Mar 25, 2009

Molson02536
  • 3854 Answers

SOURCE: Constant clicking from flasher unit

The flasher unit has gone bad and needs to be changed. The flasher module is a part of the hazard module also. The clicking is the unit is still working but there is not enough voltage to activate the lights to flash. It's common on the Malibu's and other GM product cars similar to the Malibu like Grand Am's Ect. I believe Auto Zone has the replacement part for you car and is more reasonable in price then the dealer and the y also have the step by step instructions to replace the flasher module. Good luck and keep me posted, be glad to help.

Posted on Jun 03, 2009

  • 4 Answers

SOURCE: 1997 Chevy Tahoe both turn signals stopped working

Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Posted on Jul 21, 2009

sonofadocker
  • 11 Answers

SOURCE: 2001 Chevrolet Impala Door Locks Suddenly Quit Working

Passenger side of the fender under the hood - check the fuse relay box - about $12.00 a piece - they do go bad from time to time.
exchange the power lock relay with another one and test the locks.
then put the relay back and go to the autostore.

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Location of signal flasher module in 2001 chevrolet monte carlo


It's behind the hazard button on the instrument panel. You have to take out the instrument panel bezel to get to it. It controls both turn signals and emergency flashers.

Oct 12, 2017 | 2001 Chevrolet Monte Carlo

1 Answer

I can't find the turn signal flashers on my 99 Olds delta 88 but I did find the emergency flasher. Does it have one or two flashers because my signal light are not working at all HELP PLEASE!!


One flasher only. Check fuses first. Then suspect the flasher as a possibility. I have seen the hazard switch cause the turn signals to malfunction. Try pressing the hazard button in. If they work and flash as hazards you know the bulbs and flasher are ok. If the turn signals then work you have a defective multifunction switch (the hazard/turn signal/etc switch)

Aug 04, 2016 | Oldsmobile Delta 88 Cars & Trucks

4 Answers

How to replace turn-signal flasher 2004 impala


Make sure you check the turn signal fuse, located at the driver's end of the instrument panel. You have to open the door, take out a screw, and the panel pops off. The 4th fuse down on the 3rd row from the left is marked TRN-SIG.

Aug 04, 2014 | 2004 Chevrolet Impala

1 Answer

2002 impala signal lights and hazard lights not working


The turn signal flasher and hazard flasher are both incorporated into the hazard switch on the dashboard (yeah, they saw the money possibilities there). This is a common problem with the Impalas. Sometimes slowly pressing and releasing the hazard switch a few times will correct the problem. I have been told by some that if you get electrical contact cleaner and spray it into the hazard switch it helps also, Apparently dirt gets in and does the damage. Replacement of this hazard switch will fix this if nothing else works.

Nov 21, 2011 | 2002 Chevrolet Impala

3 Answers

Hazard lights wiring my singal turn lights are not working


Hi, Check the fuse box. The fuse maybe blown. Good luck.

Sep 17, 2011 | 2002 Chevrolet Impala

2 Answers

I am having a problem with my emergency flashers on my 2001 chevrolet impala, when i press the button for them to come on they work fine, but when I press the button for them to go off they go off but the...


Good Evening Faith. General motors had problems with thier combination hazard switch. The reason it is called a combination hazard switch is because it is also your turn signal and hazard flasher. On the Oldsmobile Alero, pontiac grand am there was a recall, as far as the impalas and monte carlos I cannot say for certain. Your local parts house (autozone, Advanced, Oreilleys) should have them or be able to order it. That should correct your problem. Hope this helps.

Aug 07, 2010 | 2001 Chevrolet Impala

1 Answer

My emergency hazard flashers are giving me fits. When I press the buttong to turn them on they work fine, and when I press the button to turn them off they go off but the noise stay on. IT sounds like a...


There is a 4-way switch inside your steering column which controls the hazard lights the blinkers. If this switch is faulty your example is one thing that can happen. If the problem worsens you could lose all exterior lighting except the headlights. I had this happen to me one time.

Aug 07, 2010 | 2001 Chevrolet Impala

2 Answers

Turn signal flasher location 2004 impala


It should be in the hazard button, You have to pull it out and replace it. Try the junk yards they dont cost alot.

Oct 09, 2009 | 2004 Chevrolet Impala

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

Not finding what you are looking for?
2001 Chevrolet Impala Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...