Question about 2005 GMC Sierra 1500 Hybrid

Open Question

How do you replace a starter on a 2005 GMC Sierra Z71

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1118 Answers

SOURCE: Replace starter on 1992 GMC Sierra pickup truck

First thing unhook positive battery cable, unhook main cable on starter selanoid and small wire on selanoid (there may be 2 small wires) There may be a bracket on front of starter that has to be removed, and then the 2 main bolts that hold it to engine block and it should come out.

Posted on Feb 14, 2009

Ad
  • 1 Answer

SOURCE: Replace 2005 GMC Sierra Daytime Running Lights...

Open the hood, and in the top right and left corners of the primary headlamps you'll see two pins (L shaped) swing them out (towards the front of the truck) and lift out. This allows you to remove the upper headlamp assembly. You can then remove the lower assembly by pushing outwards on the plastic clip that is hooked into a metal clip. Once it's out you just turn the bulb to remove it.

It's much easier if you unhook the leads to the upper assembly's bulbes so you can set the whole thing aside.

Posted on Mar 31, 2009

  • 1 Answer

SOURCE: 1995 GMC Sierra Z71 ABS light stays on

yo man, idk if this is exactly what your problem is but my 1991 gmc sierra was doing the same fuckin thing and ****, and i took it to the gm dealer and had them look at it and my connectors and my ignition switchs were fried, also my truck was having a problem shitfing once those went but i also had that problem, perhaps yours is somehwta liek that as well... hope i could help

Posted on Aug 08, 2009

  • 142 Answers

SOURCE: how to replace a starter on 1994 gmc sierra 1500

unhook the battery, there are 2 wires on the starter solenoid, 1 is a 5/16 nut and the other is a 9/16 nut remove those wires. this maybe easier to remove the heat shield first. next ther are two 9/16 bolts holding the starter in position, remove, and the starter will come out, about a 15min job

Posted on Sep 27, 2009

  • 22 Answers

SOURCE: special wiring harness for new stereo in 2005 sierra

Yes u do....I have an 03 sierra and apparently they changed everything in 03.....the harness is over $100.....but u need it....and they dont sell a reg wiring kit from 03 and up....if it was an 02, then yes u could get away cheap......it has to do with the steering wheel switches

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 GMC Sierra Z71 Xcab 5.7


Try motor to body ground ? wiring harness connections..

Aug 17, 2012 | Cars & Trucks

1 Answer

Is there a web site to locate the schematics on installing a starter on a 1997 GMC Sierra 1500 z71


Try Autozone.com look under repairs then input your vehicle info to see manuals and diagrams,,

Nov 26, 2010 | 1997 GMC Sierra

1 Answer

How do you change starter in 97 gmc 1500 z71. Truck is turning over but not starting


1. disconnect battery 2.disconnect two wires on starter note one in selinoid 3.unscrew the two bolts i belive 15mm.

Feb 06, 2010 | 1997 GMC Sierra

2 Answers

I have a 05 sierra z71 5.3L when i start the


Could be a starter sticking but that would cause more of a grinding noise, my best guess is that your flex-plate(flywheel) is broken if the noise is coming from between the engine and transmission. Remove the access cover for the bell housing and take a look at the flex-plate.

Jan 23, 2010 | 2005 GMC Sierra

1 Answer

Replaced battery and starter both where bad. Truck


loose connections and starter relay in power distribution box under hood. Make sure you dont have a loose or poor connection on a ground or power wire from battery.

Oct 27, 2009 | 1997 GMC Sierra

1 Answer

Will 15 inch wheels fit a 1999 gmc sierra z71?


you have too get special rims made too clear the calipers

Mar 13, 2009 | 1999 GMC Sierra

1 Answer

Need to know where sensor 1 (oxygen sensor) on bank 1 is located


It would be on the left header pipe as you sit in the truck. Its the sensor in front of the cat

Jan 16, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...