Question about 1998 Chevrolet Camaro

Open Question

How to remove Body Control Module for a 1998 camaro

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 2 Answers


the body control module is located under the center console under shifter silver box four colored plugs

Posted on Jan 10, 2009

  • 400 Answers

SOURCE: 1998 camaro v6 3.8 fuel injected cranks but wont

the modual is what the 3 coils mount to. Each coil is for two differant holes. Each coil is bolted to the modual. If you unbolt all of the coils and pull them up that is the modual.

You sure you don't have any theft codes in the system?

Posted on Oct 18, 2009

  • 132 Answers

SOURCE: body control module

In the trunk

Posted on Jan 31, 2009

  • 306 Answers

SOURCE: Where is the body control module located on 2000 yukon

under the dash on the drivers side. above the break pedal

Posted on Feb 06, 2010

Testimonial: "Thank you for your help. The module was in the location you described. "

  • 74 Answers

SOURCE: Body Control Module

Below the instrument panel on the left side henge pillar,or up high behind the Instrument panel depending the model and options!


Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Wheres is my body control module on a 97 chevy camaro v6

Body Control Module (BCM)
Under the right side of the instrument panel near the blower motor

Jun 02, 2018 | Cars & Trucks

1 Answer

Seat belt light doesn't turn off even when the car is turned off.

You have either a short to ground on the black/white wire going to the seat belt switch or you have a bad body control module. Disconnect connector C3 at the body control module and check for good ground with the seat belt UNBUCKLED. If you see that, it's the BCM

Dec 06, 2017 | 1998 Chevrolet Camaro

1 Answer

1998 camaro body control module

under dash by is part of fuse box

Aug 05, 2012 | 1998 Chevrolet Camaro

1 Answer

Where is the car alarm system located in 2002 chev camero. It is factory installed.I had the Body Control Module replaced, and now I cannot lock or unlock my car with my key remote control and it is not...

Who installed the new BCM ? The features that are not working need to be programmed into or turned on .Need factor tech2 scan tool to do that .

Nov 11, 2017 | 1998 Chevrolet Camaro

1 Answer

1996 Camaro: body control module location...

Behind the right side of the glove box

May 18, 2010 | 1996 Chevrolet Camaro

2 Answers

Windows and stereo quit working while running not all the time some times never have a problem what do i need to check thank you

A short in the wire in a possibility, but the most likely solution of two items malfunction at the same time on this vechicle is more likely the BCM or Body Control Module. Cars now days actually have two on-board computers, the ECM (Engine Control Module, i.e computer) and it's lesser known brother the BCM (Body Control Module). The BCM controls things like your radio staying on when you turn the ignition OFFF ntil you open the door and other "magical stuff" that makes you wonder "how does it do that...?"
On late production Camaros and Firebirds the soldered connections on the BCM board would dry-out from excessive heat and cause all sorts of havoc (there is your "short"). If you have any hobby skills with electronic soldering you can pull the board and re-solder the connections yourself -or- buy a new board. For more information do a web-search using BCM or GM body control module. Good luck...

Mar 19, 2010 | 1996 Chevrolet Camaro

1 Answer

98 Camaro 3.8 V6 stalls when started w/cold engine

Sounds like your throttle body and throttle plate are full of carbon.You also have a idle air control motor with a pintle on the end that gets carbon on them.Go to your local parts store and get a can of throttle body cleaner and a old tooth brush and clean throttle body and plate and if you can remove the IAC and clean the pintle and bore. that should take care of your stalling.

Nov 05, 2009 | 1998 Chevrolet Camaro

1 Answer

How do I remove the center console on a 1998 camaro?

I have purchased the Haynes Manual for 93 thru 02 camaros, the information inside is not very detailed and fails to fully explain the removal / instalation. This being the case, I highly doubt that the local library can offer any further assistance. check with local wrecking yards, or as a last resort go to a Chevrolet Dealer and ask a GM paint and body guy.

May 14, 2009 | 1998 Chevrolet Camaro

Not finding what you are looking for?
1998 Chevrolet Camaro Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides