Question about 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

How to remove the starter from an 2003 f350 6.0L 4x4 super cab pickup. bottom 2 bolts are out

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 880 Answers

If the battery is disconnected, the bolts are out, wires are disconnected from the starter then just wiggle and pull the starter at the same time and it will come out.

Posted on Aug 06, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

TOP BOLT USE SOCKET & 6 IN. EXTENSION TO REMOVE TOP BOLT.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove oil pan



4x4
1. Open the hood.
2. Disconnect the battery negative cables.
3. Remove the intake air assembly.
4. Remove the radiator shroud retaining bolts.
5. Install engine support fixture # 8534B .
6. Raise and support the vehicle.

WARNING: HOT OIL CAN CAUSE PERSONAL INJURY.


7. Drain the engine oil (Refer to 09 - Engine/Lubrication/OIL - Standard Procedure) .
8. Loosen the front engine mount bolts.
9. Lower the vehicle.
10. Use the engine support fixture # 8534B to raise engine out of the front mounts.
11. Remove the engine oil dipstick.
12. Raise and support the vehicle.
13. Remove oil pan bolts, break the pan to block seal, and lower pan slightly and remove oil suction tube fasteners.
14. Remove oil pan and suction tube.
15. Remove the 2 bolts from the front of the engine block stiffener.
16. Remove the oil pan.


4x2
1. Open the hood.
2. Remove the negative battery cables.
3. Raise and support the vehicle.
4. Remove the transmission oil cooler lines.
5. Remove the propeller shaft.
6. Remove the starter bolts.
7. Support the starter.
8. Remove the torque converter bolts.
9. Remove the exhaust hanger bolts.
10. Remove the gear shift cable.
11. Remove the wiring harness.
12. Remove the transmission mount.
13. Remove the crossover bolts.
14. Position the transmission jack.
15. Remove the bell housing bolts.
16. Remove the transmission.
17. Remove the flywheel housing bolts (8).
18. Remove the flex plate bolts (8).
19. Remove the engine oil dip stick.
20. Drain the oil.
21. Remove the steering rack bolts.
22. Remove the oil pan bolts.
23. Remove the oil pickup bolts.
24. Remove the oil pan. user_online.gif

Aug 01, 2014 | Dodge Ram 3500 Cars & Trucks

1 Answer

Change starter


Remove negative battery cable. Remove wires from starter. Remove bolts. Remove starter. Reverse process to install.

May 12, 2013 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Remove install starter


2 tips. Use a rope around the starter and suspend it to aid in lining it up for install. Tape the inner most bolt to the socket to prevent the bolt from falling or use magnetic socket inserts.

May 12, 2013 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

How do you remove the engine starter???


1. Disconnect the cable from negative battery terminal.
2. Raisew vehicle and support it securely on jackstands.
3. If the starter has a heat shield, remove it. Remove the protective plastic cap and disconnect the wirring from terminals on the starter solenoid.
4. Remove the starter motor mounting bolts and detach the starter from the engine.
5. Installation is the reverse of removal.
Tourque teh starter bolts to 18ft-lbs

Feb 20, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

3 Answers

How do I find how many gallons my fuel tank is on my 1997 f-150


1997-1998 Ford F150 Pickup Gas Tank -4x2 Regular Cab 6-1/2 Box 179.9
1997-1998 Ford F150 Pickup Gas Tank -4x4 Regular Cab 6-1/2 Box 219.95
1997-1998 Ford F150 Pickup Gas Tank - Super Cab 6-1/2 Box 179.95
24.5 gallons

Hope helps (remember rated this). Good luck

Feb 12, 2010 | 1997 Ford F150 Regular Cab

1 Answer

How to remove a starter on a 1996 s10 4.3 4x4


well most of the time you only have to deal with 2 or 3 very long bolts. look for the starter on the back right (passenger) side of the engine. (for rear wheel drive trucks)it will be a big and heavy(so be carfully) cilinder shape object that is right againts the engine and fly wheel. to remove locate and remove all wires(make note of were they are) and then remove the bolts one buy one. with the last one you may need to hold up the start and undo the last bolts buy hand(after useing a wrench for the first part) it sohuld simply fall off the engine. don't drop it. if it dosen't come out so easly it may be held up buy the flay wheel cover. thin sheat of metal held in place buy 5-7 small screws. easy to uninstall and reinstall

May 29, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

Starter


There is a bolt on the back side of the starter and two in the front. make sure you get the one in the back.I hope this helps.

Jan 19, 2009 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

Starter motor


It's easy, 2 9/16 bolts, remember to disconnect battery and make a note of the wiring on the starter.

Sep 29, 2008 | 1991 GMC Sonoma

2 Answers

2003 F250 super duty 4x4 no throttle


did you check the linkage?. if the linkage is ok your tps(throttle position sensor is bad. you need to replace it. it is located on the throttle body housing is black in color and has (2) bolts that hold it in place there is a weatherproof plug with (2) wires. hope this helps yah out. please rate this

Sep 01, 2008 | 2003 Ford F250 Super Duty Crew Cab

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

Related Topics:

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...