Question about 1997 Lincoln Town Car

1 Answer

How difficult is it to put the belt on a 97 town car

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Not difficult at all just not how the old belt comes off or refer to the diagram provided under the hood. There is a tension pully that is spring loaded just put a wrench on the nut after gettin the belt in place then move the pully giving you enough slack to slide it on.

Posted on Aug 06, 2010

  • schwegmann19 Aug 06, 2010

    Just note* sorry for the typo's been out in the heat all day :)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car off water flowing out the top of engine started after changing alternator 97 maxima belts are good any feedback is much appreciated


Without knowing what make and model, it's difficult to guess.

The first thing I would check is the belts. Did they get put back on incorrectly?

Feb 09, 2016 | Cars & Trucks

1 Answer

Why is he steering so difficult omy 97 lexus ls 400


Broken belt. Steering pump malfunction.

Sep 02, 2014 | Cars & Trucks

1 Answer

I have a 97 lxi town and county van i was drivin last nite and my belt came off how can i put it back on


better check it over good, belts dont just "fall off', something is bad. Tensioner? pulley? ect.

Sep 15, 2011 | 1997 Chrysler Town & Country

1 Answer

What would cause difficulty in putting on a serpentine belt? The car squeeks when the belt was on before, now it is difficult to put on the belt in order to see what causes the problem.


Make sure that you have identified the tensioner pulley as apposed to the idler pulley. With the 15mm socket on the tensioner pulley's bolt, rotate it clockwise and this will release the tension on the belt, or in the case of installing a new serpentine belt, allow you to get it where it belongs. Hope this helped Tim

May 28, 2011 | 1996 Chrysler Town & Country

1 Answer

Yes I have a 97 town & country and it has a couple problems.. one is a sqeeky belt and the tranny feels like its slipping once in awhile but and then when checked they say its. fine..


Belts these days aren't as forgiving as the old V belts, when they go bad they glaze, slip, make noise etc. They may LQQk good but squeaking is first warning of belt going bad. I'd replace it for peace of mind. Re: Trans - have you ever had trans fluid and filter changed? It's one of the most overlooked maintenance items of all time. It should be changed every 50k, 30k if you tow a trailer. The $50 you spend on a trans filter service will save you a $2000 transmission job.

Jan 04, 2011 | 1997 Chrysler Town & Country

2 Answers

Emergency flashers and turn signals stop operating


The interior fuse box locations - 1995-97 Town Car 93146g31.gif
The engine compartment fuse box locations - 1995-97 Town Car 93146g30.gif
The interior fuse box locations - 1995-96 Continental 93146g34.gif
The engine compartment fuse box locations - 1995-96 Continental 93146g35.gif

Sep 24, 2010 | 1995 Lincoln Town Car

1 Answer

How do you release belt tensioner to change belt 97 town car


Attatch socket or breaker bar to bolt on pulley, either push or pull to release tension. Keep firm grip and release SLOWLY after belt is released. It will spring back and could cause personal injury or break the pulley if you just let it go.

Dec 24, 2009 | 1997 Lincoln Town Car

1 Answer

97 Town car radio problem


bad antenna or antenna connection.

Oct 27, 2008 | 1995 Lincoln Town Car

Not finding what you are looking for?
1997 Lincoln Town Car Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...