Question about Volkswagen Jetta

2 Answers

I need to know which cylinder is number 6 on my 2003 vw jetta gli so i can fix the problem it. the computer shows a po code 306 which interprets to a nuber six misfire but im not sure which is number six

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

It's the back one on drivers side.

Posted on Aug 06, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Volkswagen Master
  • 14,036 Answers

CYLINDER NUMBER 6 STANDING IN FRONT OF VECHICLE FIRST 3 CYLINDERS FACING YOU FROM LEFT TO RIGHT IS 2 4 6 CYLINDER 6 FIRST CYLINDER FACING YOU DRIVERS SIDE.YOUR MISFIRE COULD BE BAD SPARK PLUG OR IGNITION COIL.STOPPED UP OR FAULTY FUEL INJECTOR.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 VW Jetta Codes


i have a land rover freelander how does an engine how does engine coil goes bad? also I'm having another problems with my rear windows they don't want to go up or down. I changed the sensors but still not working. can you please help me
Thanks

Nov 13, 2013 | Volkswagen Cars & Trucks

1 Answer

2002 saturn vue cylinder 1,3,5 misfiring when swapped coil pack it went away now cyl 2,6 misfiring.


having PO 304 = Misfire cylinder 4,PO 306 = Misfire cylinder 6, as I read above you have done the most. The thing that you have missed is to check whether the Catalytic Converter is faulty or not. To get an idea check whether you have a smell like rotten eggs at the end of the exhaust,you start having problems with cat and needs replacement. My advice before you go for a cat replacement is good to visit an MOT center and check your emissions and then you decide,

Aug 10, 2012 | Kia Rio Cars & Trucks

1 Answer

Which cylinder is number 2 on a 2003 vw gli


Cylinder no.# 1 is near to timing belt on VW engines. So, cylinder number 2 is the second one counting from the timing belt. Good Luck!

Sep 18, 2011 | Volkswagen GLI Cars & Trucks

1 Answer

Clutch replacement instructions for 1986 VW Jetta


The release bearing goes in the back of the transmission. You'll need to remove the round "VW" cap on the end of the transmission. I would need to see the pilot bushing to know for sure. It could be the starter bushing or the clutch pushrod bushing.

Apr 25, 2010 | 1986 Volkswagen Jetta

2 Answers

Jetta 2000 tdi 1.9 i need location tr switch code


The switch just may be out of adjustment.

its location is on the transmissiom by the shift cable bracket

Mar 03, 2010 | 2000 Volkswagen Jetta TDI

1 Answer

Missing thermostatic air cleaner


I believe it does. It should be in the bottom part of the air cleaner box. There should be a vacuum hose connected to it from the throttle body boot.

Mar 04, 2009 | 1986 Volkswagen Jetta

1 Answer

Cant get the oil filter housing off


Jetta GLI figuring it's a VR6 use a 6 mm allen socket to remove the drain plug to empty the oil and reinstall it. The use a 36 mm socket to remove the oil filter housing, replace the seal and torque it to 25nm.

Nov 23, 2008 | 1996 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...