Question about 2000 Ford Expedition

Open Question

How to remove top bolt from starter on 2000 ford expedition

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 93 Answers

SOURCE: I have a 2000 ford expedition and we cant get the

hi spray as much rost off as you can into the thread and leave it for 30 mins and try again, also sometimes it is easier to loosen it by first tightening it, i know it sound weird but its like drifting... if that dosent work and the bolt is rouned off then you could use a punch and hammer

Posted on Feb 11, 2010

Ad
rabbit7954
  • 417 Answers

SOURCE: how to remove starter for 2000 expedition

You need to access it from front front wheel well using a couple long extensions and an elbow if you only have short extensions you may need a couple more. Jack the vehicle up an remove tire (and shroud if you really want room) you should be able to access it fairly easy from there. I hope this helps you.

Posted on Jul 02, 2010

  • 198 Answers

SOURCE: How to remove the top bolt from starter on 2000

You need a socket set and flexable extension to reach that top bolt.

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the top bolt from starter on 2000 Ford Expedition?


You need a socket set and flexable extension to reach that top bolt.

Feb 16, 2011 | 2000 Ford Expedition

1 Answer

Trying to change a stater cant find the bolts on top


the top bolts come in from the rear of the bell housing. They these bolts mount both the bell housing to the block and the starter motor to the block. Under neath just line up wich mount bolts are close to the starter and undo them, possibly 2 that hold them. once remove starter should fall straight into your hand

Jan 22, 2011 | 1997 Ford Expedition

1 Answer

How to remove a starter from a 2003 expidition


Thank you for using Fixya.
Heres's the procedure on how to remove and install starter for your 03 Expedition. First remove the battery cables from the battery. Remove the electrical connections to the starter and label for replacement. There are 3 bolts - 13mm. The bottom bolt is also the ground terminal, therefore you will need a deep socket for that bolt. The other two are accessable ideally with about a 7" extension to your socket wrench. The top bolt is on the top of the starter and you could fit your hand up there to feel it and place the socket. The 3rd bolt is between the bottom and top bolts. Remove the 3 bolts and the starter falls right out.

All the best!

Nov 16, 2010 | 2003 Ford Expedition

1 Answer

How to remove starter for 2000 expedition have problem getting to top bolt


You need to access it from front front wheel well using a couple long extensions and an elbow if you only have short extensions you may need a couple more. Jack the vehicle up an remove tire (and shroud if you really want room) you should be able to access it fairly easy from there. I hope this helps you.

Jul 02, 2010 | 2000 Ford Expedition

1 Answer

I have a 2000 ford expedition and we cant get the top bolt off the starter to remove it. Does anyone have any suggestions?


hi spray as much rost off as you can into the thread and leave it for 30 mins and try again, also sometimes it is easier to loosen it by first tightening it, i know it sound weird but its like drifting... if that dosent work and the bolt is rouned off then you could use a punch and hammer

Feb 11, 2010 | 2000 Ford Expedition

1 Answer

I want to replace the starter on my 2000 ford expedition. How do i do that?


Unhook the battery cables, locate the starter, unbolt the wires going to it, remove the bolts holding the starter on, take starter off, reverse the procedure with the new starter.

Feb 02, 2010 | 2000 Ford Expedition

1 Answer

Looking for plug in on the Expedition 2000


There on top of motor under coil pack's, coil pack's held on with an 8mm bolt, sit right under injector fuel rail, disconnect harness to coil pack's remove 8mm bolt remove coil pack and remove spark plug's.Hope this was helpful.

Dec 08, 2009 | 2000 Ford Expedition

1 Answer

How do you change the starter on a 2005 ford expedition


The answer will vary - depending on the engine you have...Generally, you first remove the neg. cable from the battery.
Then you remove the 2 (or 3) wires from the starter.
Then you remove the 2 bolts that hold the starter to the bell housing.
Lube the bolts (must be clean too) - place the new starter... install the bolts... Torque to about 30 lbs .... the reconnect the wires to the new starter.
Finally reconnect the neg battery cable and start your Expedition!!

Oct 09, 2009 | 2005 Ford Expedition

1 Answer

I'm trying to remove my starter off my 2000 ford expidetion,


You will need some tools that will give you enough reach to go over the top of the starter, and more than likely a swivel joint to get enough access to remove the bolts. They are usually hard to get too. Patience is required as are some very contorted positions sometimes along with the correct tools to gain access to the bolts.

Aug 15, 2009 | 2000 Ford Expedition

1 Answer

How do i change a starter in a 2000 5.4 expedition


to change the starter, you need to remove it from the bell housing on the transmission, which is attached by 2 or three bolts. Make sure you unplug the battery before you try to remove it. This is what it will look like: http://www.1aauto.com/1A/starter/Ford/Expedition/1AEST00119/611937/1/?utm_source=google_base&utm_medium=cpc&utm_campaign=google_base_api

Jul 08, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...