Question about 1992 Chevrolet S-10

Open Question

Ineed to install a new ignition switch in my1992 chevy s10 but I need to get the old one out can you tell me how

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tripletauto
  • 1450 Answers

SOURCE: installing ignition switch for 87 chevy s10 Blazer 2.8L 4X4

you need to replace the electrical part of switch?If os it is down on column under dash will be two bolts holding on with the dimmer switch also

Posted on Aug 28, 2008

Ad
motor1258
  • 6674 Answers

SOURCE: 2001 chevy cavalier door contact switch install

If no screws or nuts holding it that you can see from outside, then just use a screwdriver or something and pry at the base where it is against metal.

Posted on Jan 04, 2009

marf1
  • 11 Answers

SOURCE: How to remove old ignition switch and install the new one

on ignition cylinder shaft/housing there is a recessed button in it put key in ignition push on button then turn key to on position u will feel button sink in then pull cylinder out

Posted on Mar 24, 2009

  • 541 Answers

SOURCE: how do you replace an ignition starter switch on a

it is on the top of the steering column in the truck cab.remove battery cables. remove the lower portion of you dash.loosen the bolts on the plate that holds your column up to the dash. the column will pull down some. you may have a gear indicator tab/string that needs to be undone. remove column clamp blots all the way. the switch is on the top, it has a rod that moves and is postioned on the column. remove old switch, install new switch in th position where the old on was

Posted on Oct 23, 2009

seanpwright
  • 2030 Answers

SOURCE: Chevy s10 turn signal switch

All the wires will be in the steering column, be sure that you got the correct switch, you may have the wrong one.

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 Chevy Blazer 4 door I've change the ignition switch starter all that good old stuff if I turn the key and jumper by the starter it will run I have liked it just no crank no start


1989 Chevy blazer 4.3 won't start..I have ... - CarGurus

www.cargurus.com > Questions > Chevrolet > BlazerCarGurusJan 30, 2013 - 96 Chevy S10 Blazer with 4.3 L engine vortex will turn over but won'tstart. ... i a 93 k5 blazer 5.7tbi in cold weather it will not start, if i hook jumper ... was told it just needed a Fuel pump, I replaced the Fuel pump, and the Filter, ...

Oct 12, 2015 | Cars & Trucks

1 Answer

I need a wiring diagram for a 2002 chevy s10 4 wheel drive 4.3 for the starter to the switch


If the truck cranks over you have voltage at the ignition switch ! From starter to switch , First off starter to what switch ,ignition ? There is a 175amp fuse that supply's battery voltage to the power distribution center - fuse box under the hood . On the lower right side of the radiator support, below the battery !

Sep 10, 2015 | Cars & Trucks

1 Answer

My 88 Chevy s10 blazer won't start did complet Service on change fuel jets mapsencer.still nothing


1. try to remove positive power cable from your battery and wait for 5 minutes.
2.while waiting for 5 minutes,Drain all remaining power by switching your ignition to ON,switch on your headlights,step on your brake pedals
3.switch off your ignition ,including your headlights
4.install back your positive power cable to your battery
5. try to start your engine

Sep 04, 2015 | Cars & Trucks

1 Answer

I had steering column replaced on my 87 chevy s10 but the problem is headlights will not come on. Also brake light are staying on. I found out the used steering column has cruise control which my old


the connections should be rechecked at the ignition switch or other--tell the tech who didit--may also hav a fuse issue--its a really complex area and the cruise may effectit

Sep 18, 2014 | 1987 Chevrolet S-10 Pickup

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Chevy s10 turn signal switch


All the wires will be in the steering column, be sure that you got the correct switch, you may have the wrong one.

Nov 09, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

How do you replace an ignition starter switch on a chevy s10 1985? i need a diagram or something.


it is on the top of the steering column in the truck cab.remove battery cables. remove the lower portion of you dash.loosen the bolts on the plate that holds your column up to the dash. the column will pull down some. you may have a gear indicator tab/string that needs to be undone. remove column clamp blots all the way. the switch is on the top, it has a rod that moves and is postioned on the column. remove old switch, install new switch in th position where the old on was

Oct 23, 2009 | 1987 Chevrolet S-10 Pickup

3 Answers

I have a 97 Chevy S10 pickup...cannot move shifter out of park


When my battery was dead i was forcing the key in the ignition which messed everything up with my chevy s10 and have to get everything replaced....: (

Dec 28, 2008 | 1997 Chevrolet S-10 Pickup

1 Answer

Installing ignition switch for 87 chevy s10 Blazer 2.8L 4X4


you need to replace the electrical part of switch?If os it is down on column under dash will be two bolts holding on with the dimmer switch also

Aug 28, 2008 | 1987 Chevrolet S-10 Pickup

Not finding what you are looking for?
1992 Chevrolet S-10 Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...