Question about 2005 Hummer H2

Open Question

How do you replace Rear Bumper light bulb, 2005 SUV, Hummer H2. I don't see any scews ?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 59 Answers

SOURCE: rear door will not stay up on hummer h2 2005

Tape it up in place for now, likely either it has come out of the retainers or the regulator that rolls it up and down needs to be replaced.

Most autoglass shops can do this and will be cheaper than the dealer.

Or to do it yourself you would start by taking the door panel off to see if you can tell what is broken.

Posted on Feb 23, 2009

Ad
abdoush
  • 12 Answers

SOURCE: change light on 2006 hummer h2

it can be easily changed by removing the plastic cover then u will see the light bulb, don't try to change it from the back, it wont open :)

Posted on Sep 08, 2009

carlo_basara
  • 1 Answer

SOURCE: where can i find a replacement for a right front

okrtjththrrgtbfeuytjytj

Posted on Dec 08, 2009

eitan
  • 291 Answers

SOURCE: How do you get the cover off the rear light built

from the rear of the bumper

Posted on Feb 23, 2010

iambanshee74
  • 3489 Answers

SOURCE: Rear Light Bulb replacement on H2 Bumper

Once you open the tail gate, you will see 2 torx screws going into the side towards the tail light assembly. Remove those 2 screws and the assembly will come right out. Let me know if you need anything else.

Posted on Apr 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I connected diagnostic/testers to the OBD-II connector on my 2007 Hummer H2 SUV, they did not work at all, does anyone know why ? What are the exact pinout of this connector on Hummer H2 ?


Data Link Connector (DLC) Pin
Wire Color
Circuit No.
Function
1
--
--
Not Used
2
PU
1132
Class 2 Serial Data
3
--
--
Not Used
4
BK
1050
Ground
5
BK/WH
1851
Ground
6-15
--
--
Not Used
16
OG
640
Battery Positive Voltage

Dec 26, 2014 | 2007 Hummer H2 SUV

1 Answer

2006 Hummer H2 left rear bumper turn signal / brake light does not work. Bulb is good, same light works as tail light, but doesn not work as brake light or turn signal. Problem is also present in trailer...


if someone added an aftermarket item to your lights, they may not work correctly, have it looked at by a professional who does that type of thing for a living.

Oct 15, 2013 | 2006 Hummer H2

2 Answers

I began to have issues with my '05 Hummer H2 a few weeks ago.....


P0496 = "Evaporative emission system high purge flow"


At the dealership, we get a lot of complaints like yours and they all started with running too low on fuel or running out.


Start with replacing the fuel filter and get back to me.


Running low/out tends to suck up micro trash from the bottom of the gas tank and that gunk clogs the fuel filter.

Feb 02, 2013 | 2005 Hummer H2 SUV

1 Answer

Daytime running light


Disconnect the electrical connector from the back of the lamp assembly.Remove the nuts.Disengage the clip retaining the lamp and remove the lamp from the bumper.Turn the socket counter clockwise and remove the bulb.Reverse procedure to reinstall the lamp assembly.Hope this helps.Good luck.

Feb 22, 2012 | 2005 Hummer H2

1 Answer

Rear Light Bulb replacement on H2 Bumper


Once you open the tail gate, you will see 2 torx screws going into the side towards the tail light assembly. Remove those 2 screws and the assembly will come right out. Let me know if you need anything else.

Apr 20, 2010 | 2006 Hummer H2

1 Answer

2005 Hummer H2 SUV - Rear bumper light socket


Hello, If the socket is not broken and the metal contacts are not melted, you should be able to reuse the socket. It just got scorched from the bulb reaching 1000 degrees in a fraction of a second. The Tungsten coil inside takes a lot of heat to burn it up. If you can scrape the char off of the contacts and install a new bulb, every thing should work perfectly. I see these sockets charred like this all of the time, even with a good bulb. If the socket is deformed, you can usually go to any parts store and ask them if they can find you one of these sockets. Most of the parts stores have books loaded with aftermarket companies that deal with just this type of scenario. I hope this info helps...

Jul 04, 2009 | 2005 Hummer H2

2 Answers

Change light on 2006 hummer h2


it can be easily changed by removing the plastic cover then u will see the light bulb, don't try to change it from the back, it wont open :)

Jul 17, 2008 | 2006 Hummer H2

Not finding what you are looking for?
2005 Hummer H2 Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...