Question about 1992 Lexus Es 300

1 Answer

How to change valve cover gasket and thermostat on 1992 ES300

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Lexus Master
  • 902 Answers

The thermostat its located in water out hose near to a/c compressor, to change valve cover, front of engine remove the plastic cover with lexus logo using hex 5mm key 2 bolts , unplug 3 spark plug wires ,loose all 10mm bolts on valve cover , to rear engine valve cover remove before the manifold intake and all components , air filter duct , etc.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 honda accord 2.2----- 4 cylinder engine-how do you change valve cover gasket?


To replace the valve cover gasket, you have to:
1) Remove spark plug wires
2) Remove spark plugs
3) Remove ground cable, and all pcv lines and hoses
4) remove 4,10mm nuts holding the valve cover on
5) remove valvecover, and replace old gasket

I hope this helps
Matt

Jun 16, 2011 | 1992 Honda Accord

1 Answer

I have a lexus es300 1992. I have a problem with my car after it has been running for a while. My drive is one hour one way to work, and by the time im 3/4 the way there, when i stop at red lights i get...


I think you can have a head gasket leak and not get coolant in your oil. You may be getting enough in there that it's causing that cylinder to not fire and give a rough idle.

May 09, 2017 | 1992 Lexus Es 300

1 Answer

I have a 92 Lexus Es300 with 213500 on it, I just had the head gaskets changed, new water pump, timing belt, thermostat, and the blower motor is working fine. But, I still aren't getting any heat in the...


Might not be a hot enough thermostat or make sure there is enough vacuum in the vacuum-hoses. The heater controls might not be getting enough vacuum to operate the flaps inside the heater compartment where the heater-core is. Or something wasn't hooked up right when the head-gaskets were done.

Dec 27, 2010 | 1992 Lexus Es 300

1 Answer

Valve cover gasket leak on 95 lexus es300. how do i fix


Take the valve cover bolts off then get the new gasket on or use permatex gasket glue than put it back together

Apr 10, 2010 | 1995 Lexus ES 300

1 Answer

My 1992 honda honda accord ex is leaking oil on the plugs after changing valve cover gasketand seals and plugs


You'll have to take the valve cover off again. There must be a piece of old gasket still under there somewhere, or your gasket isn't seated properly. Make sure the head is completely clean, and the valve cover.

Sep 25, 2009 | 1992 Honda Accord

1 Answer

How to change valve cover gaskets on 92 Dodge Minivan 3 Liter V6 Engine. Is it difficult to do in own garage.???


No, not at all!

Take your time....take pics of it BEFORE you remove the next piece.

No special tools required.

Mar 31, 2009 | 1992 Dodge Caravan

1 Answer

Spark plug well filling with oil.


a new valve cover gasket and o-rings around the wells should have cured this...did you clean the old o-rings off the valve cover completely before installing new ones? this is a common problem with these models.....i would re-check my gaskets and mateing surfaces. valve cover gaskets and spark plug well o-rings are relatively low cost. the spark plug is tight, correct? write back with an update!

Oct 16, 2008 | 1992 Honda Accord

2 Answers

Need to replace thermostat on 1992 toyota 4 runner. Where is it located?


The thermostat is located at the end of the upper radiator hose. Were the hose connects to the top of the engine on the passenger side of the valve cover on the engine. I believe the housing takes a 12mm socket. Don't for get to get a new gasket for the thermostat housing, how thermostats come with the gasket. I also recommend changing your radiator pressure cap 13psi.

Here is a picture:
149c2be.jpg

Jul 22, 2008 | 1986 Toyota 4Runner

2 Answers

I need to replace the valve cover gasket on my voltswagon jetta


you probably mean the valve head gasket.

In this case this is serious work and you should contact a local VW dealership or mechanic and have them do this work for you to insure a job well done. If you simply mean your Valve cover, then this is no big deal and can be done by taking out the 4 screws found at the corners of the valve cover and then simply lifting the cover free and replacing it with a new one/tightening the screws back down.

hope this helps :)

May 17, 2008 | 1992 Volkswagen Jetta

Not finding what you are looking for?
Cars & Trucks Logo

549 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...