Question about 2002 Dodge Durango

1 Answer

Engine starts and stalls will run w/higher RPM

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 61 Answers

Its normal wait until 120 sec or 3min if still higher pls check the gasoline carborator to the mechanic technician

Posted on Aug 06, 2010

  • Ry K Nov 03, 2010

    Read the post more carefully. He/she was saying that the engine would remain running if the RPM's were elevated. Also, do you know of any 2002 Durangos with a carb? Or any 2002 vehicle for that matter? They are fuel injected. Issue is likely with the fuel system or engine vacuum. Check your fuel pressure to make sure it is with in proper limits and go from there. Good luck and if you post again, please be as clear as possible when describing the issue you are experiencing.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What makes the car start and run but gauges go off and key light comes on


The first part is magic, (EFI system and good engine)
but?????
gauges go off can be a bad fuse or loose fuse to cluster.
when any Gas engine stalls. the RPM drops to 0
the EFI sees that and goes to key on, not started self test.
this is covered in the operator guide.
key light comes on KEY LIGHT, HUMMMMMMM
Let me look at the waring lamps, there are many.
one light is engine overheat that is logo of a thermometer but looks
just like a key.
http://dashboardsymbols.com/the-symbols/
is this a engine stall post
or engine runs perfect all the time , but only my dash acts funny
you didnt say?

key lamp?
immoblilzer (big trouble there)

a stall is anytime engine RPM drops to zero. called a STALL.
if your cars engine stalls, post that way, the lamps are all normal
on at any stall, on any car.
at a stall , rpm goes to zero and MPH drops to zero as you coast to a stop , stalled. that is all normal for any stall.

if engine stalls.
that is complex.
here is list.
  1. lost 12vdc power to EFI system. (battery died, fuse blown)
  2. never gave your car the 60,000 mile tune up, see opr, guide.
  3. bad fuel.
  4. overheated the engine.
  5. engine oil gone, never ever checked at each fill up.
  6. other more complex EFI system parts failures, ASK.

May 03, 2014 | 2002 Jeep Grand Cherokee

1 Answer

Loses power in high gears


run fault codes and look for accelerator position sensor fault . Check for MAP/MAF sensors as well

Feb 18, 2014 | Cars & Trucks

1 Answer

.Engine stalls, won't idle, bucks at 3700rpm


Sounds like mass airflow sensor to me or your timing jumped. Probably high miles too, eh? Could possibly be voltage regulator but I highly doubt it.

Jan 16, 2013 | 2001 Ford Explorer

1 Answer

Driving on the road the RPM goes higher wituout speedind


Check out related help links to troubleshoot these problem:----Click the link below:---Idles Fine but RPM jumps in drive mode?http://technoanswers.blogspot.in/2012/07/idles-fine-but-rpm-jumps-in-drive-mode.html
---------Mitsubishi Lancer rpm needle bounces?http://technoanswers.blogspot.in/2012/02/mitsubishi-lancer-rpm-needle-bounces.html
--------How to adjust rpm on 2009 dodge charger SRT8?


http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
---------
Engine cuts out at 3000 RPM?http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html

---------

Cold start problem and vehicle shudder around 2500 to 3500 rpms
http://repairhelpcenter.blogspot.com/2012/10/cold-start-problem-and-vehicle-shudder.html

---------
High rpm in neutral? Inconsistant high RPM in neutral?http://technoanswers.blogspot.in/2012/02/high-rpm-in-neutral-inconsistant-high.html

-----------
Jetski Sputters and Low RPM? http://whatisbyme.blogspot.in/2012/07/jetski-sputters-and-low-rpm.html

--------
Fuel Injection Problem And RPM suddenly increaseshttp://whatisbyme.blogspot.in/2012/07/fuel-injection-problem-and-rpm-suddenly.html

----------
2005 Toyota Highlander: Engine runs hard RPM below 3000?http://whatisbyme.blogspot.in/2012/05/2005-toyota-highlander-engine-runs-hard.html

---------
1987 Toyota Camry: RPM Drops going Up hills?http://whatisbyme.blogspot.in/2012/05/1987-toyota-camry-rpm-drops-going-up.html

-----------
Cruise Control stops working, Excessive cranks to start the engine and RPM goes max 2500 http://whoisbyme.blogspot.in/2012/07/cruise-control-stops-workingexcessive.html

----------
1990 Toyota 4Runner: Engine cuts off when reaches 2000 RPM?


http://whatisbyme.blogspot.in/2012/05/1990-toyota-4runner-engine-cuts-off.html

------------
1999 Toyota Camry: Erratic stalling and high engine RPM at idle?


http://whatisbyme.blogspot.in/2012/05/1999-toyota-camry-erratic-stalling-and.html

---------
1995 Toyota LS: Misfire at idle or low RPMhttp://whatisbyme.blogspot.in/2012/04/1995-toyota-ls-misfire-at-idle-or-low.html

-----------
Lexus RX: Tapping noise under Valve Cover At Low RPM?http://technoanswers.blogspot.in/2012/04/lexus-rx-tapping-noise-under-valve.html

----------
These will help.
Thanks.

Nov 22, 2012 | 2008 Toyota Avalon

1 Answer

Hard to start, engine dies on higher rpm


Hard to start and stall at higher RPM. So you are stalling at load. What the engine needs at higher RPM and load is more fuel.The fuel pressure at idle should be at 30 psi to 45 psi. A plugged fuel filter will also do this. so you need to address the fuel pump and filter

Feb 24, 2012 | 1995 Mercury Villager

1 Answer

Engine stalls on red light


increase the engine rpm by adjusting the accelerator cable from under the hood to a higher rpm.
it only stall when the rpm get too low

Oct 15, 2011 | 1999 Dodge Durango

1 Answer

Car will not start without pressing gas pedal to keep idle speed up. If I keep idle at 900 RPM or higher it runs as long as foot is on gas pedal. It then stalls out when I take foot off gas pedal. No...


Have the idle bypass valve checked, also called idle air control valve.
If that valve is stuck in the closed position, it's not allowing the fuel to bypass the throttle plate to keep it idling, resulting in stalling, but will keep engine running if the pedal is pushed down.

May 14, 2010 | 2000 Toyota Camry Solara

1 Answer

2000 durango 5.2 cold starts, engine stalls or rpm surging


i know this may sound stupid but if your battery is old or a little weak on this vehicle the idle air control solenoid will act speradicley hunting for were it should be and the vehicle will stall.replace battery

Jan 31, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
2002 Dodge Durango Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...