Question about 2002 Ford Mustang

Open Question

Cost of parts & labor to replace transmission on 02 Ford Mustang?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 147 Answers

SOURCE: cost of repair

about $800 bucks

Posted on Nov 18, 2008

  • 4376 Answers

SOURCE: Need approximate labor cost for relacement of a 4.6L Ford Expedti

I would guess a dealer or garage would charge you about 15 hours labor at @ $80/hour. You should call several garages for an estimate.

Most use Chilton's flat rate manual to calculate times.

Posted on Feb 16, 2009

  • 508 Answers

SOURCE: 1996 ford explorer needs new head gaskets

I would put the money into the vehicle. Do you really want to go thousands into debt to purchase another vehicle? Cheaper to fix than replace. If the vehicle is in good shape all around I would repair it. If you are going to do the work yourself it will cost lots less than the 2000. If you do the work have the heads milled and replace the stem seals and knurl the valve guides at the same time. Also check for weak or broken valve springs. Your local machine shop should do all this anyway. Good luck.

Posted on Feb 18, 2009

  • 75 Answers

SOURCE: cost to replace starter & flywheel on a 2003

for the starter and flywheel 1400 sounds right they would have to take the tranny out to get to the fly wheel but why do they need to replace the fly wheel did your old starter do a lot of grinding its not to often you have to replace a flywheel unless the starter wrecked it somehow again not to often starters are ment to break before it wrecks the flywheel the flywheel made of harder metel i would get a second opinion on replacing the flywheel

Posted on Aug 27, 2009

  • 290 Answers

SOURCE: Cost to replace wheel bearings on 1997 ford aspire

advance auto parts total price for all bearing, front and rear and seals come to $70.00. labor should be about that much(plus cost of grease) good luck

Posted on Sep 04, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Iam no mech but is it hard 2 change the motor n transmission mounts in a 96 ford thunderbird 3.8 engine if it is whats the going price 2 do so i dont get taken

It is fairly easy to do if you have a lift, but it is possible to do on the ground with a jack and jack stands. You will need to be able to unbolt both sides of the mount and support the engine with the jack while you replace the mounts. If you download the autozone app to a smart pone or tablet it will give you a repair estimate calculator,

Mar 09, 2018 | Ford Cars & Trucks

1 Answer

Book labor time for auto repairs on a 1967 mustang

This is not a complete job. You must also replace all rubber brake hoses and all metal lines on a car so old. This is major work if done properly. You can order stainless steel lines already bent and correct length, or you can make your own by cutting and flaring parts store lines to fit. I would charge at least as much as retail cost of parts for labor--perhaps more. Job could take several days.

May 29, 2015 | Ford Mustang Cars & Trucks

2 Answers


About 6.5 hours to do the job. Times their labor rate. Buy a flywheel. I can guaranty yours will be bad. Weather is or not.

May 15, 2015 | 1965 Ford Mustang

1 Answer

Full engine rebuild cost

You need to shop around - parts & labor vary from supplier to supplier.

Apr 01, 2011 | 1990 Ford Mustang

1 Answer

Bought a 2001 Mustang GT was told if I pull the wrong wire on the engine I could trip the computer. Is this true?

02 mustang 3.8 missing on # 3&5cylinders -replaced plugs & wires & coil 2 times still no fire on 3 & 5

Feb 17, 2011 | 2001 Ford Mustang

1 Answer

Hi there- i have a ford explorer 96 limited, o/d light is flashing constant- no reverse- would transmission conditioner harm anything if tried & what is an approx cost for replacement of transmision...

Hi, there no need to add anything to transmission its to late for that if you alredy lot reverse. For a rebuild unit and labor,fluid ,and i would add a cooler also you looking at any were between $1500 - $2000 dollars it all depens on shop rate and if its 4x4 or 4x2 . Thanks if i can help just re post.

Jan 08, 2011 | 1996 Ford Explorer

2 Answers

I have a 1986 Chevy S10 4X4, Auto.Transmission, Reverse & 1st gear are fine, but will not come outta 1st gear. What can I do? Thanks for any help!

Normal 0 To take off and put back the transmission cost around $700 labor. To open up, repair and put things together, parts and labor start at $800. So the total would be at least $1500.
Buying a used Transmission for $300, and replace the bed one for $700, would cost you $1000 at least.
The question is:
Could you find a dissent transmission of a 1986 Chevy S10 4X4.
The answer is:
Chanced are slim or none.

Aug 14, 2010 | 1986 Chevrolet Chevy

2 Answers

Ignition problem on 2000 olds intrigue

Are you seeing a check engine light ?

If, so the problem might be with crankshaft position sensor. You may have to get it replaced for $50-60

Jun 02, 2010 | 2000 Oldsmobile Intrigue

3 Answers

My speedometer isnt working and i was wondering how much it would cost to fix it yourself

Its probably the speed sensor. I believe it on the rear of the transmission

Sep 08, 2009 | 1995 Ford Mustang

Not finding what you are looking for?
2002 Ford Mustang Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides