Question about 2002 Ford Taurus

1 Answer

There is a misfire in my engine and I replaced the spark plugs and wires. I was told that now I have to replace the coil pack. Will this help? Or is there something else I would need to do?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Glad i saw this problem, i had the exact same problem, and the answer is yes, you will need to replace the coil pack.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 pontiac firebird coil pack, will coil make it miss on 1 cylinder, 3800 engine, misfiring, have changed plugs and wires


yes, it can happen. check for spark from the number one coil using spark plug wire and hold it near a grounded point. it should be a consistent spark with engine running. compare to different coil wire for verification. those coil packs are partially replace able because each coil fires two plugs. replace the no.1 portion with a new one from parts store. 28.00

Jun 21, 2011 | 1998 Pontiac Firebird

1 Answer

Autozone says it's #4 not firing and to put some gas treatment in. and new plugs and wires. still misfiring.


Check ignition coil pack for spark, at ignition coil with engine running disconnect one spark plug wire at a time, they should all spark, if no spark out of any of the coil pack, replace coil pack.

Nov 09, 2010 | 2001 Hyundai Tiburon

1 Answer

There is a misfire in my engine, changed plugs & wires. now it reads that the fuel leveling sensor is bad, will this help?


If there is a misfire, the cylinder that it is misfiring in will be recorded as a code in the computer.

Have the car scanned to determine which cylinder is bad. Then, replace the coil pack going to that cylinder.

Ignition Coil Pack Removal & Installation 2V Engine To Remove:
  1. Twist the spark plug wires off of the ignition coil towers. Mark the spark plug wire positions so they can be installed in their original positions.
  2. Disconnect the electrical connector from the ignition coil. CAUTION
    When removing the spark plug wires, a slight twisting motion will break the seal and ease removal.
    coilconn.gif

  3. Remove the mounting screws and remove the ignition coil.
To Install:
  1. Position the ignition coil pack on engine.
  2. Install mounting screws and torque to 53 in-lbs. (6 Nm). coilbolt.gif

  3. Connect ignition coil pack electrical connector.
  4. Match previously marked spark plug wires to ignition coil and install.
4V Engine To Remove:
  1. Remove the RH cowl grille cowlpic.gif
  2. Remove the screws and the water shield
  3. Mark spark plug wire positions
  4. Disconnect the spark plug wires from the ignition coil CAUTION
    When removing the spark plug wires a slight twisting motion will break the seal and ease removal.
  5. Disconnect the ignition coil electrical connector coilconn.gif

  6. Remove the mounting screws and remove the ignition coil
To Install:
  1. Position ignition coil pack. Install mounting screws and torque to 56 in-lbs. (6Nm)
    coilbolt.gif

  2. Connect ignition coil pack electrical connector
  3. Match previously marked spark plug wires to ignition coil and install
  4. Position water shield and install screws
  5. Install RH cowl panel
prev.gif next.gif

Aug 11, 2010 | 2002 Ford Taurus

1 Answer

My Sentra is overheating. I changed the Thermostat before taking it to the local Autozone and have the check engine light checked out. Well I was told there after scanning the computer that it is a MISFIRE...


First step is new plugs. It's possible that you have a fouled #1 plug. If that doesn't work, check spark wires (if the car is so equipped) or if it has direct coil-on-plug ignition, where each cylinder has a coil pack on top of the plug, swap the coil packs between cylinders 1 and 2. Clear the code, run the car, and rescan the computer. If the code moves to indicate cylinder 2 misfiring, then your coil pack needs to be replaced.

Jul 07, 2010 | 2005 Nissan Sentra

4 Answers

I have a ford explorer 99 but it's giving a error code PO306 what do u think it is


It sounds like a misfire. Check spark plugs 5 and 6. It could be bad fuel, bad plug wire, or weak coil. Check the fuel injectors as well. Other possible causes could be an egr valve stuck open, vacuum leaks, low fuel pressure.

Feb 17, 2010 | 1999 Ford Explorer

2 Answers

I have a misfire on number 3 on 97 deville, if i change the coil will the car run better?


A code P0303 may mean that one or more of the following has happened:

Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector
Burned exhaust valve
Faulty catalytic converter(s)
Running out of fuel
Poor compression
Defective computer

If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Feb 16, 2010 | 2000 Cadillac DeVille

2 Answers

P301 Code on 2001 Ford Taurus SOHC (not FFL) with 253K miles. Replaced plugs and wires with Bosch Platinum +4 plugs and Motorcraft wire set. P301 returned almost immediately. Engine performance extremely...


Coil pack should in the front top of motor, with engine running remove one spark plug wire at a time from coil pack ( careful not to get shock ) they should all have spark, if one don't replace coil pack.

Jan 23, 2010 | Ford Taurus Cars & Trucks

1 Answer

Ford mustang - year 2000 - 3.8 liter. The coil pack is out?


I replaced the coil pack to no avail. I also purchase a code reader while at the auto parts store. This device told me cylinder 3 was misfiring (P0303). I found that the spark plug wire had shorted out on the manifold sensor tubes. Replaced that wire and done.

I highly recommend keeping a code reader in your car tool kit. very useful.

Aug 30, 2009 | 2000 Ford Mustang

Not finding what you are looking for?
2002 Ford Taurus Logo

Related Topics:

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22258 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...