Question about 1994 GMC Sonoma

1 Answer

My brake lights and hazards stopped working. All other lights work. The bulbs and fuses are good.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 78 Answers

IT SOUNDS LIKE YOUR FLASHER FUSE IS DEFECTIVE. IT WORKS BOTH HAZARDS AND TURN SIGNALS. YOUR LOCAL PARTS STORE SHOULD HAVE IT VERY CHEAP

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Toyota Tacoma 1995 both brake ights out but blinkers and hazards work... i think its the fuses my boyfriend said its the light bulbs


I would go with your boyfriend on the bulbs. Get new bulbs and if they still don't work then check the fuses. If neither of those get them working it might be something in the wiring / connections. Good luck.

Oct 15, 2014 | Cars & Trucks

2 Answers

!997 Ford Thuderbird brake lights and hazards do not work


Lets start at the beginning.
The turn signals and brake lights use different fuses but both go thru the turn signal switch and use the same bulbs.
Have you checked the fuses for each circuit and does each switch have power in and out ?

Feb 03, 2013 | 1997 Ford Thunderbird LX

1 Answer

Where is the brake relay on a 2000 tahoe


No relay in the wiring diagram. There is a 20amp hazard fuse and a 10amp vehicle stop fuse in the engine compartment fuse box.
If those fuses are good, and the brake light switch checks out ok, I would look at the turn signal switch next.

Jul 27, 2012 | 2000 Chevrolet Tahoe

1 Answer

Brake Lights all of a sudden not working on my 1995 Tahoe. Checked fuses and lights. Neither burnt out.


The turn signal switch and the hazard switch are likly places to look. To checjk the fuses is'nt to take them out and look at them but to test to see if power will go though them, I use a test light ( a tool that looks like an ice pick with a wire coming out of the handle and the handle is clear with a light bulb inside). with the clip connected to a good ground as you touch the back sides of the fuses the light will light if it only lights on one side, the fuse is blown ( does'nt matter what it looks like ) a bad fuse can look good. the turn signal switch is involved as is the Hazard switch. If you pusth the hazard switch and the lights light good then you know that the lights and the sockets are good. You also know that the wires are good . With the key on the turn signals should work front and back ( thier different cicruits) If only working in the front the turn signal switch is bad provided the hazards worked all the way around. Does the high mount stop light work? It works off of it's own circuit on the brake light switch and if no lights work your back to the fuses only after you checked to see if the high mount bulbs are good. Your car is plenty old enough to have them be burnt out. If the high mount doesn't work with the bulbs known to be good and then you check with the test light to see if the power isd getting to the brake light switch. One wire is hot with the key off and another comes hot with the key on ( the cruze control switch in the brake light).

Aug 30, 2011 | 1995 Chevrolet C1500

1 Answer

Brake light isnt working .. when lights are on brake lights come on ... when brakes are applied.. the light is not bright... nor does my back up light illuminate.. but turn signals do work


make sure that you have the correct bulbs installed and cleanup all the sockets with some WD-40. do your hazard lights work correctly? if not then check the fuse for the hazard/stop light. if its not the fuse then it probably means its a bad turn/hazard switch assembly.

May 14, 2010 | 1995 GMC Jimmy

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

Tail lights stopped working (keeps blowing fuse)


you could either have a front marker/signal lamp w/lamp grounded and causing this,remember...when tail lights are on so are your frt parking/marker lights on also..... other than that you could have a feed wire worn thru and grounding out to the frame

Sep 13, 2009 | 1994 Lincoln Town Car

3 Answers

Brake Lights don't work


I have a 1987 Cutlass Supreme and the brake lights wouldn't work. When I moved the tilt steering to a certain position they worked.

May 25, 2009 | 1987 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1994 GMC Sonoma Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...