Question about 1997 Oldsmobile Cutlass Supreme

1 Answer

Blinkers do not work when i try to use them normaly. But will work when i use them like changeing lanes when i just pull down slighty.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Oldsmobile Master
  • 599 Answers

Sounds like the turn signal switch is the problem,also known as the multi-function switch, you must remove the steering wheel to acess this switch.hope this helps. if you need more help get back to me and we'll go from there. Thanks Ray PLEASE rate my fix

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change a "flasher" for the "blinkers


Very easy once you find it. Just pull off the electrical connector, unclip the flasher from its bracket, and the new one in...presto! The flasher will be somewhere under the dash, usually somewhere around the steering column. If you have a flasher for the blinkers and a separate flasher for the hazards, put the hazard lights on, and that flasher will be clicking-change the other one for the blinkers.
Good luck.

May 03, 2012 | Cars & Trucks

1 Answer

My back blinkers work off and on, when im driving i know when their off cus they blink twice as fast on the inside, then about 5 minutes later their back on cus they blink normaly, changed bulb and fuse,...


You might have to change the circuit board inside the assembly. The circuit board is what the light bulbs go into. Advance Auto Parts stocks these circuit boards. They come in pairs for about 35 bucks.

Sep 20, 2010 | 1988 Chevrolet K1500

1 Answer

Tach, Spedometer, Temp, and fuel guage all went out at the same time. Idiot lights, instr. lights, blinkers all working normaly


there is a regulator in the instrument panel that reduces the battery voltage to 9V, often a zener diode, this is likeley to be blown

Aug 10, 2010 | 1996 Pontiac Grand Am

1 Answer

The signal was working fine as I changed lanes on


Probably it is the signal flasher located in the main fuse panel on most cars. It is a round,silvered coloured and usually has three prongs plugged into the panel

Jul 25, 2010 | 2000 Toyota Sienna

1 Answer

No brake lights and no cruise control. fuses are good and lights are good. taillights work and the blinkers work. what's the problem?


in stop pedal youll see the stop light switch,remove the botton cover and you will find it,check it whith a test light,it should be normaly open,so one side power and the other ground,depresed power in both side ok,GL

Nov 25, 2009 | 2006 Isuzu i-350

1 Answer

Blinkers just stopped working changed fuses didnt work


Do the hazards work? Is it all the blinkers? If so try the flasher fuse otherwise make sure the hazard switch isn't half pressed down. Some cars you can hit the hazard switch just a little so hazards won't come on but neither will the blinkers. If it's just 1 blinker change the bulb

Aug 22, 2009 | 1998 Chevrolet Cavalier

1 Answer

95 pontiac grand prix. blinkers not working. checkd EVERYTHING.


go to a junk yard and get a multi-function switch(the one on the steering column)

Mar 23, 2009 | 1998 Pontiac Grand Prix

1 Answer

Blinkers not working on 97 jimmy


located uner dash near centre must pull down all plastic inder dash there should be more then one flasher module there should be right in front of centre concole.

Jan 02, 2009 | 1997 GMC Jimmy

1 Answer

Steering pull and tire wear


If professional alignment does not straighten out alignment & tire wear, you can "tinker" with the settings to straighten it out. Caster is pre-set & non adjustable. You did not mention toe-in.(which more often causes wear. If the steering wheel is not horizontal it shows a possible toe-in problem, as can wandering. What condition are the tie rod ends and ball joints? Be sure everything is tight before doing anything else. If you make any changes, make small ones, write everything down and use good reference marks that will not wear off. Once a small change is made, drive for a while & check tire wear often.
You are correct in persuing this matter, but If you did not buy the car new, even a minor previous accident could throw the body out of whack enough to give problems like you are having.

Dec 31, 2008 | 2007 Hyundai Sonata Limited Sedan

1 Answer

2001 denali


gas pump get somebody to start the car get a hammer and hit the gas tank under it normaly if it gas the electrical pump start with the shock of the hammer if it run you got to change that pump because its not gonna run for long let me know thanks for the post

Jul 13, 2008 | 2001 GMC Denali

Not finding what you are looking for?
1997 Oldsmobile Cutlass Supreme Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...