Question about 2001 Chevrolet Silverado 2500HD
Fuel pump, I just replaced mine, you can tilt the bed up on the drivers side, remove the four bolts on the drivers side and loosen them on the passengers side. Using a hydraulic jack and several lengths of 4x4 and 2x6x6 blocks, carefully lift the bed. To make sure the 4x4 didn't slip, I drove a cut off bolt into one end and stuck that through a hole in the bed cross member infront of the read wheel. Watch the wires. The new fuel pump had to have the connector on the wiring harness replaced. The fuel pump is held in place with a rotating ring, this has a locking detend and removed easily. With a new seal, the ring is more diffiuclt to rotate to the fully closed position. 4 hours including soldering in the new connector. I recommend that you use solder and heat shrink instead of the butt connectors supplied with the fuel pump. The pump was $500 from GM and $275 from Auto Zone
Posted on Aug 07, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 10, 2015 | 2001 Chevrolet Silverado 2500HD
Feb 26, 2014 | 2001 Chevrolet Silverado 2500HD
Nov 11, 2010 | 2001 Chevrolet Silverado 2500HD
Dec 04, 2009 | 2001 Chevrolet Silverado 2500HD
Oct 19, 2009 | 2001 Chevrolet Silverado 2500HD
Sep 23, 2009 | 2003 Chevrolet Silverado 2500HD
Aug 11, 2009 | 2005 Chevrolet Silverado 1500HD
284 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: