Question about 2008 Dodge Ram 1500 2WD

2 Answers

Replaced both front rotors they were warped. Changed rt front caliper but the noise continues. Sort of a rubbing sound. Smell no heaet or buring. Braking is ok but do feel a slight pull o the right

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,340 Answers

I would say a CV joint or axle/shaft.Maybe the wheel bearing.If you do CV work,both sides should be checked.It can be adjusted,but if there's rubbing noise I think something needs replacing.It's kind of strange if it is a CV for a 2008 unless it has 50-60K miles on it.Also,if CV work is done,you should get a front end alignment,which should also be done if any time you replace the front tires.Good luck and please let me know if you are going to self-repair,or have a shop check it out.If you are going to try self repair,you need to jack up at least the right front,preferably with a hydraulic jack and not a tire jack,and pull on the shaft to the tire and see if there is a lot of play.Each car is different but there should be little to no play in it.It should be practically unmovable.

Posted on Aug 06, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 183 Answers

Right front bearing bad

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Burning plastic smell from drivers side rear wheel


pull off wheel and check brake pads low,caliper sticking ,or debris -if brakes look good than check hub-wheel bearing----- may be going bad

Apr 11, 2014 | 2005 Honda Accord

2 Answers

I hear a rubbing sound when i go down the road.when i slow up it stops,when i speed up it gets louder.it is coming from the front wheels i think.i just had the brakes done about a month ago???? help


Have the front wheel bearings checked they are a sealed unit that has to be pressed in or assembly removed and replaced. Or your brakes are dragging and rubbing against the rotor it could be the caliper is sticking or the rotor doesn't have enough wave, warp cut in it to push the pads back enough. Most people think a rotor is cut perfectly flat if this was true the pads would rub against the rotor all the time. The car could be jacked up and on stands and have someone listen for the noise right next to the wheel while you speed up the wheels and slow down with the brakes and don't try for 100mph you could hurt the tires

Nov 27, 2011 | 2000 Chrysler 300M

2 Answers

My brakes are scrubbing and antilock light comes on, also when ever i back up, my front left wheel makes a very loud noise. kind of like rubbing metal. whats wrong?


the noise is probably the ware sensors on the brake pads making noise the noise lets you know that the brakes are getting thin are are ready to be replaced.if you let this go to long you can damage the brake rotors, make sure you check to make sure the caliper is not sticking on the left side being this side is making more noise ,a stuck caliper can cause premature brake pads ware .

Mar 05, 2011 | 1997 Chevrolet Lumina

2 Answers

My 1998 ford escort brake peddle started pulsing and then a noise. Checked fluid, not down any fluid, and no leeks, just feels like I can not stop well., No ABS lite til yesterday, then it came on after...


Normally a "pulsing" brake pedal means that that you have a warped brake rotor or the brake caliper is lose. I would start by taking the front wheel off and inspecting the brake pads and the rotor. If the brake pads are worn down bad replace them. Pay special attention to the brake rotors also as if the are grooved very bad, they should also be replaced.

Nov 15, 2010 | 1998 Ford Escort

1 Answer

Driver side front brake rubs and overheats. brake


It sounds like the caliper slides themselves are sticking, remove your caliper and check that the caliper slides are lubricated and that the caliper slides easily on them

Oct 01, 2009 | 2000 Jeep Grand Cherokee

2 Answers

Bearing problem? in 2006 Pilot


Even though you had the brake pads replaced, and since the sound you describe is a "rubbing" sound, I would suspect that the brake caliper piston is sticking and causing brake drag. The only way to check is to pull the wheel and check the caliper. If it is sticking, it will wear the pad out quickly and wll generate heat. After driving, check for excessive heat coming from the wheel. It could be a wheel bearing, but I would check out the brake caliper first. Sure hope this helped. Good luck.

Jul 20, 2009 | 2006 Honda Pilot

1 Answer

Front breaks 2001 hyundai elantra


Make sure the backing plate is not bent and contacting the rotor.

Jun 30, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
Cars & Trucks Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...