Question about Honda Accord

1 Answer

Will not pass smog how can I fix this?? Without going to Honda came back with OBD fault code PO 135 02 sensor heater fault (bank 1 sensor 1)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Master
  • 540 Answers

What you will need to do is replace the o2 sensor. bank 1 sensor1 is the first o2 sensor you come to. follow the exhaust pipe down from the motor, and you will find it screwed directly into the exhaust pipe they usually take a 7/8 inch wrench to remove or if in a tight space you will need an o2 sensor socket available at any parts house. After replacement if you have no scantool available to clear the codes, leaving the battery unhooked overnight should clear it , or most any autozone will do it for free and then go have it rechecked

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 03 Ecl Spy GT didn't pass CA smog test? OBD II and OBD Bulb check. Ser Fault Codes: P0136- P0141-P0431-P0455.


I'm sorry you replaced the parts without testing first. Codes only give mechanics a suggested area to test, not which components to replace.
Since you replaced the O2 sensor for the first two codes, a mechanic will need to check to see if it is working by reading the data flow from the sensor with a scanner while the engine is warming up. The catalytic converter will also need to be tested to troubleshoot code 431.
Code 455 is for a leak in the evap system which is what vents the gas tank to the vapor canister. The system will need to be pressure checked for leaks and then repaired.
Keep in mind, once the repairs are made and the codes erased, the car will need to be driven at least 100 miles in various conditions before you re-test.

Sep 04, 2015 | 2003 Mitsubishi Eclipse Spyder GT

1 Answer

Codes p00136 and p0053 on 2005 5.3 silverado


no question stated. so...
p0136 is B1S2 sensor (rear, only ) will not affect running.
Bank1 sensor2 (oxy)
136 only fails smog, only smog man sad.
53 is a bad heater on B1S1 (oxy)

bank 1 sensor 1 is used, and must be replace or broken
wire to this sensor bad, will waste fuel.'

http://www.obd-codes.com/trouble_codes/

Oct 13, 2013 | Cars & Trucks

1 Answer

1999 Audi A4 1.8 code PO 422?? OBD says main catalyst below threshhold (bank 1) how do I fix it? Or what needs to be done to fix it? Thank you


This is a common one and is usually just a sensor but could also require replacing the catalytic converter to correct. Nothing bad will happen if you let this one go except that you won't be able to pass a smog inspection if you have the error on. I would try resetting the error and see if it comes back.

Aug 12, 2013 | 1999 Audi A4

2 Answers

2001 hyundai santa fe with obd 2 code po172 i bought this vehicle and now it wont pass smog


An O2 sensor is never the cause of a fault code P0172, you through your hard earned money away. Read about the code and the possible causes at the link below.

P0172 OBD II Trouble Code System Too Rich Bank 1 YourMechanic Advice

Jul 09, 2017 | 2001 Hyundai Santa Fe

2 Answers

Error codes po 134 po 153 po 154 po 155 po 171 po 174


PO 134 = 02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR1)
PO 153 =02 SENSOR CIRCUIT SLOW RESPONSE (BANK 2 SENSOR 1)
PO 154 =02 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 2 SENSOR 1)
PO 155= 02 SENSOR HEATER CIRCUIT MALFUNCTION (BANK 2 SENSOR 1)
PO 171= SYSTEM TOO LEAN (BANK 1)
PO 174= SYSTEM TOO LEAN (BANK 2)
I WOULD SAY YOU HAVE FAULTY OXYGEN SENSORS CAUSING THE ENGINE TO RUN TOO LEAN REPLACE THEM AND YOU SHOULD BE BACK IN BUISNESS

Feb 23, 2011 | 2004 Suzuki Grand Vitara

1 Answer

1997 Honda Civic did not pass smog due to O2 sensor heater fault failure, sensor 1, bank 1. If I replace the sensor, how do I get the check engine light reset?


the best way to reset it is with a scan tool.
disconnecting the battery for one minute will also remove the code.BUT
if your smog test uses an OBD scan as part of the process,then there will be a problem,because the monitors will not have been set,as they are reset if the battery is disconnected..
most tests allow only one monitor missing,and not the catalyst .
A drive cycle will have to be done to set the monitors.
Typically cold start coolant temp less than 50F,idle for 2 minutes no air condition, accelerate at half throttle to 50mph then drive 3 minutes with a/c on at 50mph steady.decelerate to 10mph without using brakes..Accelerate to 60mph and drive for 5 minutes at steady speed without a/c
deccelerate without braking and drive for 1 minute at 40mph.
stop the car ,use braking.
Shut off the car and add 4 gallons of gas.do not shut off the car for more than 5 minutes.
drive in 3rd gear or overdrive off with rpm 3000 for 1 minute.
decelerate to 10mph.without braking
accelerate to 40 mph in 4th gear.,or overdrive on
decelerate without braking to 10mph.
test complete.
this will set the o2 sensor heater ,o2 sensor,catalyst,evap purge.and the other monitors.

Feb 26, 2010 | 1997 Honda Civic

1 Answer

Failed Smog Test - 4 codes for 2001 Isuzu Rodeo


Tune it up and replace the 02 sensor that keeps setting the codes bank 2 sensor 1. Have your oil and filter changed right before you go for a retest to. That will clear up 3 codes P0300, 0155 and 0154. You might have to replace the fuel sending unit to get rid of P0463 but if the gauge works OK I'd leave it alone.

Jan 12, 2009 | 2001 Isuzu Rodeo

1 Answer

Didn't pass smog


did it fail high hc? you could change 4and 6 coils around and see if you get a p0306 that means the coil pack is bad. common on this type.

Oct 01, 2008 | 2000 Chevrolet 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...