Question about GMC Yukon

1 Answer

Fluid capacity of 4l60e - Yukon GMC Cars & Trucks

Posted by on



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • GMC Master
  • 17,970 Answers

4L60E gear ratios: 1st 3.059, 2nd 1.625, 3rd 1.000, 4th .0696, Reverse 2.294.
Engine Range: 2.2L - 5.7L (M30)
Maximum Shift Speeds: 1-2 6100 rpm (M30), 2-3 6100 rpm (M30), 3-4 6100 rpm (M30)
Maximum Engine Torque: 360 lb-ft (M30)
Maximum Gearbox Torque: 610 lb-ft (M30)
Converter Size: 245mm, 280mm, 298mm & 300mm (M30), Diameter of torque converter turbine.
Fluid Capacity (Approximate): Dry: 7.9L (8.4 qt) (with 245 mm converter)
Case Material: Die Cast Aluminum
Assembly Sites: Toledo, OH; Romulus, MI; Ramos, Mexico
Technical Notes: Use with transmission controller P/N 12497316. (No core charge required on this transmission)

HERE can find other details.

Good luck.

Posted on Aug 06, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What type of tranmission fluid

1999,.lost the operators guide, sure.....
no isuzu dealers here (to ask)

what trans.? 4speed auto.
5 engines, used, im not too sure all 5 use same trans,
diesel or Gas?
ill look in the USA page.
i see 18.2 pints.
under bulletins, is see, the
4L30E/4L60E that states

The correct fluid to use in all Isuzu vehicles equipped with the 4L30E or 4L60E automatic , ill guess this. is YOURS?
transmissions is
DEXRON-III with a G-License Number (G-34318)
, Isuzu part number: 2-
90531-815-0 or equivalent
(see figure 1).

use the newest highest number Dexron, Dexron is downward compatible to #2.
covers flushing, log in to and read the TSB'S

Jul 12, 2014 | 1999 Isuzu Rodeo

1 Answer

4l60e won't shift into 3rd when cold

check trans fluid level/color. trans may have old/bad fluid in it and may need to be flushed and new filter installed.

Dec 17, 2012 | 2008 Chevrolet Silverado 1500 2WD

1 Answer

Overfulled and wrong fluid on a 4l60e transmission

What kind of wrong fluid? Like antifreeze or motor oil? Or wrong trans fluid type?

Sep 29, 2011 | Cars & Trucks

1 Answer

I have a gmc Yukon Denali xl and needed to know how many quarts of ATF transmission oil do I need to flush my trans

if the transmission fluid is brown or it hasn't been changed then I would flush it
Here is what I have listed, more than likely you have the 4L60E which is 5qts.
Engine, with filter..........6.0 quarts[1]
Cooling System, Initial Fill..........17.0 quarts
AMSOIL Antifreeze and Engine Coolant
Cooling System, W/ Rear Heat Initial Fill..........19.0 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, 4L80E Initial Fill..........7.7 quarts[2]
Automatic Transmission, 4L85E Initial Fill..........7.7 quarts[2]
Automatic Transmission, 4L60E Initial Fill..........5.0 quarts[2]
Automatic Transmission, Total Fill
4 speed 4L60E..........11.0 quarts
4 speed 4L80E..........14.0 quarts

Dexron VI is the way to go. As for a filter the choice is yours..Hope this helps Tim

May 22, 2011 | 2005 GMC Yukon Denali

1 Answer

4L60E transmission skips 2nd gear

Bad news, my friend. The transmission is toast. I have fixed MANY of these, and what has happened is that the sun gear reaction shell has cracked around the input gear collar. This will not be fixed by putting any additive in, or resetting the computer. This is a VERY common 4L60E failure, and you have, I am guessing, about 120,00-150,000 miles on this vehicle. This is when they die; earlier if used extensively for towing.
When you get this fixed, tell the builder you want the Beast sun shell and Alto Red Eagle (specify Alto Red Eagle; they're the best) 3-4 clutch power pack with Kolene full thickness steels, and Alto Red Eagle reverse/low clutch frictions and Kolene steels, as a MINIMUM over a stock rebuild. Tell him you want a new reverse drum and a Kevlar or Carbon Fiber power band, as well as Sonnax "Super Hold" 1-2 and 3-4 servos. Add a 15,000lb capacity auxilliary fluid cooler in addition to the one built into your radiator.
Then your transmission will be bulletproof, and you will think you have added 100 horsepower.
But this one is guaranteed dead.

Feb 14, 2010 | 1997 Chevrolet C1500

1 Answer

Trans fluid capacity?

fluid filter change

4l60e 5.0 qts most 1/2 ton trucks
4l80e 7.7 qts most ld 3/4 tons and some hd 3/4 ton trucks

Sep 22, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Tramission prom

Take it to a transmission shop that has a Tech 2 scanner. The tech 2 scanner will not only scan the transmission but can also recalibrate the shift points. Other reason to why it wont shift under WOT it low transmission fluid pressure so check the fluid level and have a pressure test done on the line.
The 4L60E is a great transmission but there are some things that don't work well with them like some shift kits. The ECM is program the shift points which get's messed up if done wrong. best upgrade on the 4L60E was to swap out the servos for corvette servos or after market performance one's all for under $100.00 and in most case better then a after market shift kit.
Good luck and hope this help. take care not to burn up the transmission.

May 26, 2009 | 1994 Chevrolet Camaro

1 Answer

Used 4L60E transmission will not engage travel after put in gear

Why was the trans removed?Is the torque converter bolted up to the flywheel and does it have fluid

May 25, 2009 | 1996 Chevrolet Blazer

1 Answer

4l60e transmission leaking fluid

there is aseal around that tranny shop has to be done from inside tell fixya bouy me ok

May 24, 2009 | 1995 GMC Suburban

1 Answer

Rebuilt my 4l60e and every gear works

look at reverse servo piston. it affects the reverse band.

Apr 07, 2009 | 1995 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides