Question about Ford Bronco II

1 Answer

My 87 ford bronco II died one day while driving it. I first thought I was out of gas but after putting in gas it still wouldn't start. I ran a test wire to see if the fuel pumps were good and they are, then I tried replacing the fuel pump relay switch, still nothing. Electrical and it's killing me! I have been told a variety of things from the brain is out, the ignition module, the ignition switch... When I turn on the key I do not get any pumps to turn on, and no pressurization will try to turn over but won't? Help[!!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

MARK THE DISTRIBUTOR LOCATION, LOOSEN THE HOLD DOWN BOLD AND WITH THE BATTERY CHARGED AND THE IGNITION ON, TURN THE DISTRIBUT0R AND LISTEN FOR THE FUEL PUMP RELAY TO CLICK, IF IT DOES NOT CLICK, REPLACE THE MAGNETIC PICKUP IN THE DISTRIBUTOR. THEN CHECK THE FUEL PRESSURE IT SHOULD HAVE ATLEAST 35 TO 45 PSI WITH THE ENGINE OFF.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't my ford bronco ii start


Sounds like a Timing Chain or Gear broke.

Jun 28, 2014 | 1985 Ford Bronco II

1 Answer

4wd problem


Is it manual transmission

Oct 22, 2017 | 1987 Ford Bronco

1 Answer

4WD Problem


Shut off the vehicle. Place the transfer case indicator into whatever gear you want and then start the vehicle. You placed the transfer case into neutral while the engine was running in gear that's why all the grinding.

Feb 27, 2014 | 1987 Ford Bronco

1 Answer

1984 Bronco ii


starter silanoid feeds power to the coil after start up giving 9 volts could be giving to much voltage check with volt meter while running

Aug 27, 2012 | 1984 Ford Bronco II

1 Answer

I have a 86 ford bronco ll and i was coming home and it was jurking and acting like every time i put the pettel down it boged down and died out, i sit about 15 mins. and it started up i got into town and...


I'd use a gage and check correct fuel pressure? 2.9L engine, my info says 35--45 psi. If fuel pump has a problem, make sure gas tank is clean?
The engine cranks ok, but, won't start? Did you check spark at the plugs engine cranking? I'm just trying to decide if you have more than one issue?

Aug 21, 2017 | 1986 Ford Bronco II

1 Answer

1989 Bronco starts but dies after a couple of seconds


try checking the thermostat control senser. it caused my bronco to start for a second and then die. after a while it would finally start and run for a while then die driving down the road. i changed the thermostat control senser and it fixed all problems of dieing

Apr 27, 2009 | 1989 Ford Bronco II

1 Answer

87 ford bronco II idling and power problem


check the i.a.c. (idle air control) valve near the throttle body, it fixed my low idle!

Sep 09, 2008 | 1987 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...