Question about 1997 Honda Civic

1 Answer

My manual gear shift is not shifting in third gear, what could be causing this problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

Syncro in the transmission is going out. do a trans fluid flush with a GM product called Synromesh FM (FM stands for friction moddified gotta have this one) you can get it at GM dealership. worked great on my 95 civic ex

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Pontiac Bonneville GXP will not shift into 4th gear I was to it was a fourth gear band but is that the only problem that will cause itI'notto shift into 4th gear


Which transmission does yours have 4T65-E or 4T80-E ?

4T80-E
No Fourth Gear

Checks

Causes

1-2 Shift Solenoid Valve
?€¢
Inoperative
?€¢
Debris
?€¢
Pinched wires

3-4 Shift Valve Bore Plug

Misassembled

4th Band

Burned, slipping, missing

4th Servo Cover

Cracked

4th Servo Pin

Broken, seized

4th Servo Piston

Damaged

4th Servo Seals

Rolled, cut or damaged
4T65-E
Slipping or No Fourth Gear
Slipping or No Fourth Gear Checks
Cause

DEFINITION: A large engine RPM increase is noted in fourth gear, Drive range, with little or no vehicle forward speed increase. First, second, and third gear operation are normal. Shifts into fourth gear are soft or do not occur. Fourth gear ratio is 0.705:1.

Automatic Transmission Fluid Level
Low fluid level

Transmission Main Line Pressure
Low transmission main line pressure

Oil Filter Assembly
• The oil filter assembly (100) is missing, plugged, or damaged.
• The oil filter seal assembly (101) is missing or is damaged.

Control Valve Body Assembly
• The 3-4 shift valve (362) or the 4-3 manual downshift valve (360) is stuck or binding.
• Debris is found in the passages of the control valve body (301) or of the control valve body spacer plate and gasket assembly (396)

Case Cover Assembly
Distortion or damage occurs at the manual valve (404) or at the case cover (401), causing PRN oil leak.

Driven Sprocket Support Assembly
A plugged third clutch oil passage in the driven sprocket support assembly (609)

Fourth Clutch Assembly
• The clutch plates (500-502) are worn, damaged, or misassembled.
• A missing or not seated fourth clutch spring retaining ring (601)
• A damaged spring assembly (602) or piston (603)
• Worn or damaged fourth clutch piston seals (604, 605)

Third Clutch Sprag Assembly
• The sprag (720) was misassembled or backwards on the inner race (661).
• A damaged third clutch sprag assembly (653, 661, 719-721)

Dec 06, 2015 | Pontiac Cars & Trucks

1 Answer

Grinding clutch


I'm a little confused on your description of the noise. If I understand you correctly It is making the noise when it shifts smoothly into gear but at the same time it makes a grinding noise ? It possibly can be synchronizers if the grooves on the inside of the synchronizers are worn bad enough to where the gear isn't slowing down enough causing a grind as the clutching teeth on the gear mesh with the synchrode and the shift collar.
If it is making noise in all gears except 4th you may have countershaft brgs failing. The power flow in 4th gear goes directly through the mainshaft and has a 1 to 1 ratio. All other gears the powerflow goes through the countershaft causing a load on the countershaft so if you have bearings failing in the countershaft you will hear noise in all gears but 4th.
i hope I understood you correctly .

Jan 18, 2014 | 2002 Subaru Forester

1 Answer

Electronic pressure control solenoid circuit p1745. Check engine light on 2000 ford escort, 4cl, automatic. Advance auto told me it was a dealer part but I can't find it on any of the ford websites?...


Here is what the service manual says about the EPC solenoid, the processor looks at allot of different inputs to command the solenoids, such as Throttle Position Sensor, Vehicle Speed Sensors, Transmission Range Sensor and RPM signal, The PCM controls the shift patterns for the transmission. Electronic Pressure Control (EPC) Solenoid
The electronic pressure control (EPC) solenoid is located on the main control valve body and is controlled by the PCM. The EPC controls line pressure used to apply and release clutches and bands in the transmission.
The 2-3 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 2-3 shift solenoid activates the 2-3 shift valve which controls the automatic shifting between second and third gear. Second gear is established when the 2-3 shift solenoid is switched on. The 2-3 shift solenoid is switched off when vehicle speed increases and requires a second to third gear upshift.
The 3-4 shift solenoid is located on the main control valve body and is switched on and off by electrical signals from the PCM. The 3-4 shift solenoid activates the 3-4 shift valve which controls the automatic shifting between third and fourth gear. Third gear is established when the 3-4 solenoid is switched off. The 3-4 shift solenoid is switched on when vehicle speed increases and requires a third to fourth gear upshift.

Mar 23, 2013 | Cars & Trucks

1 Answer

My 99 z24 cavalier standerd shift it will not shift into 3rd gear


The gear may be stripped, can't catch other gear,have you been grinding this gear,will have to go into transmission and replace third gear, will have to wind second gear out and shift to 4th gear.May be better and cheaper to get a remanufactured transmission cause all parts are new versus just 3rd gear being replaced.

Dec 24, 2012 | 1999 Chevrolet Cavalier

1 Answer

When it shift from third gear to second gear it makes an abrupt shift. This problem is only from third to second gear, the other gears shift nice and quiet. The transmission is new only 3 months old.


Hopefully this Transmission is still under warranty?
If its a stick the shifter or schronizers could be the culprit. If the vehicle is an automatic,shift solenoid, shifter, problems in 2nd and 3rd circuitry (band or clutch not releasing properly ),manual shift valve .
Take it back to whom ever did the rebuild or transmission work tell them the problem .
Business is so demanding these days they will probably do the right thing.

Mar 26, 2010 | Isuzu Trooper Cars & Trucks

1 Answer

I lost my third gear


It seems in the manual transmissions the first gear to go is 3rd gear..
signs of a failing trans

Dec 08, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
1997 Honda Civic Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...