Question about 2000 Dodge Durango

1 Answer

How do I replace the vehicle speed sensor on a 2000 dodge durango. The abs and brake light came on and it stalls every so often. Can this be the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

Not likely. The ABS system and the vehicle speed sensor are two separate issues. the speed sensor is located on the transmission and usually accessed on the right side. based on your description of the vehicle stalling I would have to say the ABS problem is a vacum problem or faulty master cylinder. Check your vacum lines for leaks and damage, especially the one going to the master cylinder or brake booster. I recommend the Haynes repair manual on your vehicle for further information on the location and replacement of the speed sensor.

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My speedometer and cruise control stopped working on my 2000 dodge durango I replaced engine speed sensor and that did not fix problem. Any suggestions?


What engine speed sensor ? Location ? The vehicle speed sensor signal comes from the anti-lock brake control module , to the PCM -engine control module . Speed Information to the instrument cluster comes from the PCM on the CCD serial data bus , Suggest you google Chrysler CCD data bus . Are any warning lights lit on the instrument cluster ? ABS , Check engine etc... Sorry but I suggest you take your vehicle to a qualified repair shop that has the diagnostic tools to find the problem . http://www.cnblogs.com/shangdawei/p/3570499.html

Jul 24, 2016 | Dodge Cars & Trucks

2 Answers

2000 dodge durango abs and brake ligth comes on after driving for a minute


The brake and abs light come on if a problem is detected. When the abs light is on the abs is NOT working. You need to pull the codes from the ecm to detect the problem

Jan 05, 2014 | 2000 Dodge Durango

1 Answer

2000 dodge durango abs light is on and reads a code 72 on scaner?


Hi, there is a speed sensor causing your problem which is the one on the top of the rear differential. Its the one that runs the speedometer, picked up by the abs module. The abs is disabled if the light is on, your brakes will stayed locked if you start to slide.



I'd start with replacing the rear speed sensor and see what happens. This should bring your speedometer back if nothing else. If you still have the other code coming back you'll have to replace the abs control module. That code is a direct internal failure of the control module, no diagnostics required.

May 12, 2011 | Dodge Durango Cars & Trucks

1 Answer

Abs light came on


When the abs light goes on on a 1996 to 2005 domestic vehicle, I would get my hands on a $99 or so OBD-II Brake scanner made by Actron. It will tell you which wheel speed sensor is not giving a signal to the module, or what subsection of the abs brake system is making the light turn on.

I got one from Amazon.com for about $114 delivered to my doorstep a few months ago to help diagnose a problem in a 1997 Cadillac Deville Limo I acquired.

Good luck on this repair.

Nov 17, 2010 | 2000 Dodge Durango

1 Answer

Uncle put new brake pads on vehicle (he worked on front and back brakes) and now the speedometer doesn't work, the abs light is on, check engine light, and the break light is on. what could have happened ....


Check for disconnected ABS sensors. The front sensors in the front are located next to the axle shafts. The rear sensor is located on the rear differential housing itself on top, in the middle. The ABS is monitored by the computer for performance. The ABS kicks on when the vehicle comes from a certain speed to a dead stop, keeping the wheels from locking up. That could be the reason for the speedometer not working. Or it could be a bad speed sensor. Both can also trigger the check engine light because it is monitored by the computer. The brake light usually comes on due to low fluid level. It can trigger the light, but not be low enough to impact brake performance. I hope this helps.

Oct 16, 2010 | 2000 Dodge Durango

1 Answer

1999 Dodge Durango


Check weel speed sensors. If abs is on brake light may be on too. Put a scan tool or scope them. Has to be non stop wave form sine form up and down 1 to 3 ac volts depending on speed

Nov 03, 2009 | 1999 Dodge Durango

1 Answer

Location of speed sensor for a 2003 dodge durango


the speed sensor for this vehicle is actually in the rear differential of the vehicle. this is the sensor that runs the speedometer also known as the vehicle speed sensor. there are also two speed sensors in the front one on each wheel known as wheel speed sensors these are for the abs system only

May 17, 2009 | 2000 Dodge Durango

5 Answers

My check engine light is on, my speedometer do not work, my ABS light and Brake light is on. My check engine, ABS and brake lights stay on all the time and my speedo does'nt work.


Speed sensor located in top of rear diff is probably bad, It sends a signal to abs module for abs, it also is used by pcm and cluster for vehicle speed.Sometimes rear diff mechanical problem can damage the sensor. Trans sensors have nothing to do with speedo or abs light.

Aug 03, 2008 | 1999 Dodge Durango

3 Answers

Brake light and ABS light is on and the speedometer, odometer and tripometer are inoperable


replace the left front wheel hub assy. with 4 wheel abs. The spedometer works off of the left front wheel sensor. It will fix the abs/brake light and the spedometer will start working

Jul 23, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
2000 Dodge Durango Logo

726 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...