Question about Ford Lincoln Continental

1 Answer

It will not close complete - Lincoln Continental Ford Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

What are you refering to? What isn't closing? I can help you out!

Posted on Aug 05, 2010

  • cimafunding Aug 05, 2010

    I have a 1995 signature lincoln town car the electric locking device is not getting activated when I close the trunk, it only closes partially it seems that one or all the electric motore are not geting power. Is there a fuse or any other probem, if it is a fuse please let me know the location of it

  • Nate Stansfield
    Nate Stansfield Aug 05, 2010

    There is a fuse up under the dash board.
    Either the fuse is blown or the motor is faulty. If you test the power to the motor and there is power, than motor is faulty. If no power to the motor, than a relay or fuse is faulty.


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panoramic roof problem - won't close all the way. Stops and reverses before completely closed


Your Limit Switch has gone bad or there is something in your track and needs to be cleaned

Jul 17, 2014 | 2006 Pontiac G6

1 Answer

2006 Jetta TDI Hood not closing


adjust the locking pin further down until you can close the bonnet correctly.

Dec 24, 2013 | 2006 Volkswagen Jetta

1 Answer

Windows won't close completely


Have to remove the inner door panel, to see the problem

Nov 20, 2012 | 2000 Mercedes-Benz CLK

1 Answer

My sunroof won't close completely. it will open and close but won't raise to seal with the roof of the car. I can hear clicking when i hold the button trying to close it completely.


Look closely at the guide riels of the sun roof and if necessary, use a flashlight to see if there is a small object (a branch, or any other object) stuck in the path of the piece. If not, the problem will be the mechanism itself

Dec 29, 2009 | 1999 Saab 9-5

2 Answers

Power Door Light Stays on after battery was changed by a service department


follow this to reinitialize
1. Push the “MAIN” power switch to the “OFF” position.
The “MAIN” power switch is located on the instrument panel, left of the
steering column.
2. Confirm doors are closed, lights are OFF, and the key is out of the ignition.
3. Disconnect the negative (–) battery terminal and wait 60 seconds.
4. Reconnect the negative (–) battery terminal.
5. Push the “MAIN” power switch to the “ON” position and wait 3 seconds.
6. Push the “DOOR R” switch to open the right door and wait 3 seconds after the door
is completely opened.
7. Push the “DOOR R” switch to close the right door and wait 3 seconds after the door
is completely closed.
8. Push the “DOOR R” switch to open the right door and wait 3 seconds after the door
is completely opened.
9. Push the “DOOR R” switch to close the right door and wait 3 seconds after the door
is completely closed.
10. Push the “DOOR L” switch to open the left door and wait 3 seconds after the door is
completely opened.
11. Push the “DOOR L” switch to close the left door and wait 3 seconds after the door is
completely closed.
12. Push the “DOOR L” switch to open the left door and wait 3 seconds after the door is
completely opened.
13. Push the “DOOR L” switch to close the left door and wait for the door to
completely close.
With ignition in the “ON” position and both power sliding doors in the fully closed
position, the “PWR DOOR” indicator on the dash should NOT illuminate.
14. Confirm proper operation of both doors using the dash, B-pillar switches, and the
transmitter button

Aug 12, 2009 | 2001 Toyota Sienna

1 Answer

MY 2001 subaru forester sunroof is not closing completely


does the sunshade open and close properly,you should only be able to move this when the sunroof is closed it should move freely back and forth,if it doesn't this part is causing the noise, its off its track

Jul 05, 2009 | 2001 Subaru Forester

1 Answer

I can't completely close the moon roof on my 99.5 VW Jetta


Crank should be in the trunk right with the jack to jack up the car

Jun 29, 2009 | 1999 Volkswagen Jetta

1 Answer

Hood will not close completely on 1996 Tahoe


Try "resetting" the lock. With the hood open-lube the lock good with wd-40 or similar and go pull the hood latch handle several times. See if it works good when your done. If not ,something may have got bent from closing attempts. Will have to look at adjustment then. Hope I helped. Thanks

Apr 06, 2009 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...