Question about 2000 Honda Odyssey

1 Answer

If the power door motor is bad, is it possible to disconnect the motor (power door) so it can be opened/closed manually?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

Yes you can disable auto settings for power door and make it manual and use it. 1.) Disable the power door switch on the left dashboard.
2.) Remove fuse #13 for 30 seconds or more from the passenger side fusebox. This will reset the door and the clock. Fuse box is located under the front passenger leg area.
3.) Manually open and close both sliding doors.
4.) Restore the power door fuses located under the front passenger leg area.
5.) Enable the power door switch on the left dashboard.
6.) Try opening the sliding doors.

check out.thanks.

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 Toronado headlight doors don't seem to stop when doors are closed.


I would check the headlamp door open and close relays first. One or both of them may be bad. It might be a bad headlamp door motor assembly as well. Is there anything blocking the doors from closing all the way? Have you tried closing and opening them manually? You can remove the rubber boot from the door motor knob and turn it by hand.

Apr 10, 2014 | 1992 Oldsmobile Toronado

1 Answer

When opening or closing drivers door, the window opens 5" instead of usual 1/2" and does not auto close. Also after operating window switch, onetouch or holding, the window lowers or raises and then stops...


what car

electric windows.
can fail for 3reasons
power does not reach the motor.
motor is bad
the guides are seized.

some times, the motor seems good but is weak, bad internal
commutator. (2/3s power)?

use a voltmeter see if 12v reaches motor on demand (push switch)
if that is ok, we have it down to 2 problems in 5min flat.
you could then disconnect the motor, and see if the windown
can be operated by hand, if not , its jammed
if you can , then the motor is bad or weak.

you are now IMPOWERED.

Oct 16, 2013 | Cars & Trucks

1 Answer

I have a 2005 Navigator. Sometimes the liftgate works correctly. Other times it will close via remote, then immediately reopen. Sometimes, I must stop it manually, then push it closed by hand so I can...


Electronic's , aren't they great ? There is a control module (power lift gate module ) Switch (sensor) inputs to the module . Lift gate obstacle detection strip right and left , liftgate cinching motor ,liftgate unlatch motor .Liftgate drive motor assemblys left and right . Probably a bad switch feeding bad voltage signal to the control module ! Like one of the obstacle detection sensors maybe. Could possibly have DTC'S - diagnostic trouble codes stored in the control module. Your best bet maybe to have the dealer run diagnostic's on it , check for codes . Need a factory or professional type diagnostic tool to do this. I would say you mite be able to check the sensor inputs to the module , don't know what or how much voltage > Some of these circuit's are a five volt signal from the module . Ohm check the obstacle detection sensor ? I still think best thing would have it checked for DTC'S . Almost forgot about the thing opening when you close another door , All the modules on the vehicle are connected on what is call a serial data network . Doors have modules inside as well .could be commanding that door open some how.
If you would like to see what your up against , here is a web site for free wiring diagrams http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model and engine size. Under system click on body & accessories , then under subsystem click on power liftgate. Click the search button ,then the blue link. The second diagram down starts liftgate diagrams . Good luck !

Sep 06, 2017 | 2003 Lincoln Navigator

1 Answer

When the overhead open switch is pressed, the passenger side rear door opens about 2 inches and stops. After opening manually it will not close with switch. When manually closed, will draw in last inch and...


It sounds like there are 2 motors involved, one that latches and unlatches the door, and a second that moves it out of the way or brings it back.

The one is working, the other is not.

First, look for a blown fuse.

Disconnect that 2nd motor (if you can find the connector), and use a volt meter to see if power is getting to the motor and the motor does not work, or the power is not getting there.

Jun 21, 2010 | 2005 Chrysler Town & Country

1 Answer

On a 2003 Ford E250 Econoline van with electric door locks...is it possible to disconnect the rear and side cargo doors from being electrically controlled so that only a key can open them? How would I do...


Hi! Yes its possible if manual you want it to be. Try this, If the cargo doors have separate fuse from the fuse box then just remove the fuse and it would work manually. If you wont find the door fuse then you should work on the door manually. Open the cargo door trimming and you will find a motor inside the door. The motor has a connector that leads to the lock. Remove the connector to cut the power supply to the motor and you'll be on manual now. Hope this helps and have a good one!

Apr 27, 2010 | Ford E-250 Cars & Trucks

1 Answer

Window is stuck open how to force it closed


you would have to remove the door panel and disconnect the window from the track and then wedge it up, sounds like a bad motor or switch,once you have the panel off you can test for power at the motor.

Jan 24, 2010 | 1995 Chevrolet Lumina

1 Answer

2007 honda odyssey passenger side power sliding door will not open or close


If it will not open or close using the remote and all other functions of the rmote work then it is likely to be the remote receiver inside the door behind the door liner. If it will not open or close using the handles the coupler may not be fastened that goes to the motor behind the right side liner. Or the motor may be bad. If you turn the doors off using the switch at the drivers left side and they still won't open or close check to see if the door is still on the rollers and not jammed up. The power motor may have gone bad or it may need to have the cable tension adjusted.

Jul 30, 2009 | Honda Odyssey Cars & Trucks

2 Answers

2002 Toyota Sienna power sliding door stopped working


it seems like this is the motor that operate the sliding door...it might just be the switch on the door where you push the button if that isnt the only button that cant operate what it is suppose to operate...the motor will be locted inside the door

Jul 01, 2009 | 2002 Toyota Sienna

Not finding what you are looking for?
2000 Honda Odyssey Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...