Question about 2003 Oldsmobile Alero

1 Answer

The turn signals will not work, someone told me it was probably the flasher, but I can't find it. Where is it located on this car.

Posted by on

  • george_wilke Aug 05, 2010

    Thanks, I appreciate the information.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Oldsmobile Master
  • 5,763 Answers

This is a very common problem with the newer gm cars, the flasher is part of the hazzard swith, to replace the flasher the hazard switch must be replaced, this is the button you push to turn on the 4way flashers, this switch is a common problem ive changed many and is simple to do, use a small screw driver and pry it out, then remove the connector and install new one, i would get one from the dealer they are not to much money. hope this helps.

Posted on Aug 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cant find the turn signal relay switch on a 87 buick somerset

It should be up under the dash, usually close around the steering column. The turn signal flasher and the hazard flasher may look the same. If you turn on the hazard lights, you should be able to locate that flasher-it will be clicking, and if you hold a finger lightly on it, you can feel it working. That may help you find the turn signal flasher-often they are close together.

Jan 28, 2014 | Buick Somerset Cars & Trucks

1 Answer

Signal not working after changing all fuses

i`m guessing you check all the bulbs by turning on the hazard lights and they worked.there fore this should have told you the fuse was good.try changing the signal looks the same as the hazard flasher but is a different flasher.its located by the under dash fuse panel.

Nov 02, 2011 | 1993 Buick LeSabre

1 Answer

1986 oldsmobile cutlass turn signal not working anymore...emergency flashers work brake lights work just not turn signals

OMG. Someone with a car older than my '87 toyota. Possibly a bad switch, but first locate your turn flasher, maybe that is bad, easier to try than another switch. Turns should have a fuse, too. check that.

Oct 30, 2011 | 1986 Oldsmobile Cutlass Supreme

2 Answers

My turn signal doesn't work, but the emergency flashers do, and the fuse does work.

your problem is probably going to be in the column at the signal switch itself

Oct 25, 2011 | 1998 Oldsmobile Eighty Eight

1 Answer

Both turn signals stopped working; Need to replace flasher

well its usually located under the dash and clamped onto the steering column and is silver and round in shape and color, you just unplug it and plug a new one in. its very simple. enjoy

May 26, 2009 | 1997 Chevrolet Lumina

2 Answers

Directional signals screwed up, but my 4 way flashers work.

For this modle and year the turn signal flasher should be mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located under the instrument panel in the module block, on the right side.
Hope this helps,

Feb 13, 2009 | 1995 Buick Regal

1 Answer

1992 chev 1500 signal lights and brake lights quit working

If it is the turn signal flasher it should be located in the Front seating area, driver side, driver side of steering column, behind instrument cluster, mounted in convenience center. It is possible that there could be a bad ground too. Flasher would be the first thing to check.

Nov 10, 2008 | 1992 Chevrolet C1500

1 Answer

Turn signals do not work

Is there a little silver can located in the interior fuse panel. There are usually 2 fuse panels. One is in the engine compartment and one is located in the dash just to the left of where the drivers knee would be.


Oct 25, 2008 | 1999 Audi A6

1 Answer

The turn signals arnt working

it may be a flasher or the signal(multifunction) switch.

Oct 22, 2008 | 2002 Pontiac Grand Am

Not finding what you are looking for?
2003 Oldsmobile Alero Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides