Question about 1995 Ford Explorer

2 Answers

We are changing sparkplugs on a 1995 ford explorer we need to know the number that the plugs are gapped at so that we can guage them properly

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Make: FORD
Model: EXPLORER
Year: 1995
Engine: V6 - 4.0L - FI - - GAS

Part Number RS14YC6 / GAP .054" (Original Equipment Manufacturer and/or Original Equipment Equivalent)

I have the XLT model same year, nice SUV

Hope helps (remember comment and rated this).

Posted on Aug 05, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Gap your spark plug's at .054".

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pictures and step by step manual for 98 wind star spark plug change


just make sure that the plugs and wires are for your vehicle then change each sparkplug wire according to its length, the sparkplugs if they are new are already gapped.

Feb 21, 2018 | Ford Cars & Trucks

2 Answers

Need to know proper spark plug gap for 1995 buick park avenue, 3800 engine


The correct sparkplug gap for a 1995 buick parkave is .060 gap. good day

Aug 27, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

I changed the spark plugs and now my car wont go more than 20 mph


Hi There.
I know this might sound basic, but did you make sure that the plugs were gapped properly and that the plug leads were put back in the correct order?. the spark plug gap settings should be in the owners hand book, you just need a set of feeler guages now...
Good Luck.

May 02, 2011 | Ford Escape Cars & Trucks

1 Answer

What is the sparkplug gap on a 2004 Ford Explorer 6 cylinder?


Use only platinum plugs. These are preset to correct gap.

Feb 16, 2011 | 2004 Ford Explorer

3 Answers

How to change spark plugs


Those are as easy as they come these days. Mark each spark plug wire with a piece of tape with the cylinder # written on it, so as not to mix up the wires. Remove each spark plug wire by firmly grasping the wire by the boot (do not pull on the wire) and twist it back and forth a few times while pulling slowly. It should pop off without a great deal of effort. If it is seized and it breaks, you will have to replace the wire, or at the very least replace the terminals (if you can get some). Use an air hose and blow around the base of each spark plug to dislodge any loose dirt that could fall into the cylinders (not absolutely necessary, but a good idea). Remove each spark plug with a spark plug socket and extension and ratchet (I forget which size socket, it's either 5/8 or 13/16). Check the gaps of each new spark plug (typically around 0.035 in). re-install each new spark plug by hand (do not cross-thread them) and once you have ensured that the plug is threaded in properly, tighten the plug until it seats, and then tighten an additional 1/16 of a turn. Repeat this for the remaining plugs. Re-install wires to the corresponding spark plugs. You're done!

Jan 10, 2011 | 1983 Ford Crown Victoria

1 Answer

How do I get the spark plugs out of my 1998 ford escort to replace with new ones? Also where does the pcp Valve go?


With you hood open and you are standing in front of the car sparkplug wires need to be removed,i suggest you remove them one at a time, under each wire the sparkplug is threaded into the cylinder head,using a 5/8 sparkplug socket remove the sparkplug and replace it with new properly gapped sparkplug.Note:if you remove all sparkplug wires at once the factory wires are generally numbered 1 2 3 4 the sparkplug closesed to the passenger fender is #1 and the one clossesed to the driver's fender is #4.Standing in front of vehicle the PCV Valve is located between #3 and #4 on the backside(intake side) of the engine fitted down into a rubber hose

Jul 17, 2010 | 1998 Ford Escort

3 Answers

I bought new spark plugs for my 01 intrigue. They


the plugs you need are ac delco you can find the replacement proceedure on autozone.com vehicle repair guides

Oct 09, 2009 | 2001 Oldsmobile Intrigue

1 Answer

Keeps missing despite changing sparkplugs and wires


check the coil pack for cracks especially on the bottom

Apr 30, 2009 | 1995 Ford Explorer

Not finding what you are looking for?
1995 Ford Explorer Logo

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

81424 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...