Question about 1998 Dodge Caravan

1 Answer

Power steering hold down bolt for pully replacement

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 115 Answers

You will need a power steering pulley puller,check with advance auto for a loaner tool

Posted on Aug 05, 2010

Testimonial: "thjank you very much works great slow process gettin it pulled off then pressed on but haven't thrownn any belts as of yet thanks much"

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: 1995 Toyota Corolla broken bolt

There are other solutions but they are not any cheaper unless you can find someone who can drill the bolts out because otherwise the crankshaft would have to be replaced. This would cost about the same as replacing the engine.

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove power steering pump pully


There's a nut on one side of the power steering pulley and a bolt on the other. Use a wrench to hold the nut in place while you take the bolt off.-----------------------------------------------------------------------------------
vas 5054a

Nov 30, 2012 | 1989 Chevrolet K1500

1 Answer

I'm changing the Water Pump on my 1999 Ford Taurus Sedan 3.0 V6. There are 3 bolts which are hard to get at. From my stand point, it seems I would have to either take the Main Pully which the engine...


you will have to remove the altnator/power steering mount in order to replace the water pump there and yes you do have to remove the tensionr also, sounds like you are close to having it.....HAVE FUN

Jan 16, 2011 | 1999 Ford Taurus

3 Answers

I'am replacing water pump 2006 grand prix,all bolts are remove but one. I can't remove it because theres a wheel pully in the way. I think it's the power steering pump help.


You may have to remove the pump...
BUT , maybe not...
The pump pully has holes in it... with the power steering belt loose or off ... turn the pully to see if the holes will allign with the bolt you are trying to remove... if not... then the power steering pump must be removed to gain access to the last bolt..

Sep 26, 2010 | Pontiac Grand Prix Cars & Trucks

1 Answer

Belt problem after replacing power steering pump and pully 98ram


If the tensioner can be moved by hand the lock down bolt is not doing its job. Try to tighten the bolt with the belt pulled tight and then release. If the belt loosens the bolt is not working as it should. Make sure theres a lock washer (split lock washer) between the bolt head and the post.

Dec 22, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Power steering pump replacement on 2002 chev


u will need 2 special tool to remove and reinstall the powersteering pully
it must be removed to acess the bolts to replace the pump and a new pump dose not come with pully

Nov 26, 2009 | 2002 Chevrolet Silverado 2500HD

4 Answers

2005 trailblazer


check the idler/tensioner pully's and the alternator pully, there is a common problem with one of these 3 going bad, usually an idler pully the best way to check is to get a mechanics stethescope and touch the end to the bolt on the idler pully's you will notice a very distinct sound difference from a smooth pully and one with bad bearings. gm tech here, seen many of these

Jun 15, 2009 | 2005 Chevrolet Trailblazer Ext

2 Answers

Replacing a power steering pump on a 1996 Olds Delta 88 Royale


3 bolts should be holes in the pully too go thru with an extension if their are no holes in the pully then you nee a power steering pump pully remover it can be rented for 5.00 at auto zone

Feb 23, 2009 | 1996 Oldsmobile Eighty Eight

1 Answer

FOR FIXING THE CRANK SHAFT PULLY WHICH BOLT IS FIX SMALL OR BIG


The large bolt holds on the lower crankshaft pulley for timing belt, the six small bolts hold the larger pulley that drive the alternator, power steering etc. It sounds correct.

Dec 04, 2008 | 2001 Kia Sportage

4 Answers

Camaro Water Pump!!!!


this happened to me about 2 months ago there are 3 or 4 bolts behind the power steering pump and under the coil packs. there are 11 bolts in all that hold your water pump on some are hard to get to so you are most like likly gunna have to jack it up.

Sep 22, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1998 Dodge Caravan Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...