Question about 2004 Toyota Prius

Open Question

How do you remove the 'split screen" on my toyota navigation system?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I recently changed a discharged battery of my Toyota Sequioa 2008 model, and now my entire JBL Navigation and Audio system is not working.


by changing the battery with out maintaining a voltage for the radio and any other electronic gear , you have lost codes and other operational information that you will have to reinstall to get it all to work again

Jul 07, 2016 | 2008 Toyota Sequoia Limited 5.7L V8

1 Answer

Overhead DVD player in 2008 Toyota Sienna does not show the picture. Sound works.


Hello, I hope this helps. If no change then you probably have a hardware/ wiring issue and the dvd player may need to come out. Please advise
1. Confirm the DVD RSE system is inoperative. (blank screen) 2. For vehicles with Toyota navigation system: Perform the following procedure to turn OFF the RSE Lock function. A. Press the INFO switch on the navigation unit. B. Press the "Screen Setting" touch button on the navigation display. C. Under the "Rear Lock" option, press the "OFF" touch button and then press "OK" in the upper right part of the display. D. Press the DVD switch on the RSE system (if a DVD is NOT already in the player, insert one) and confirm screen is ON and the system will play DVDs. 3. For vehicles without Toyota navigation system: Perform the following procedure to turn OFF the RSE Lock function. A. Push the Audio Control knob multiple times to cycle through the various options (Bass, Mid, Treble, etc.) until "REAR LOCK" is shown on the screen. B. Turn the Audio Control knob so the display says "OFF" next to "REAR LOCK". C. Press the DVD switch on the RSE (if a DVD is NOT already in the player, insert one) and confirm screen is ON and the system will play DVDs. 4. If the above procedure resolves the concern, explain the system operation to the customer.This procedure is described in the Audio/Video" section of the vehicle Owner's Manual. 5. If the above procedure does NOT resolve the concern, perform RSE diagnosis using the Technical Information System (TIS), 2006 model year applicable vehicle Repair Manual.

Jun 29, 2015 | 2008 Toyota Sienna

1 Answer

Toyota navigational system external system not connected


I have the same problem like your but i checked on toyota forum saw that an engineer was solved the problem. He said the vibration impact from the car and poorly well on the circuit board which cause the problem. here how he does it.
1. Remove the gps system from the car. take off the four screws which holding the gps screen.
2. Open and remove the circuit board. Next try to resolder all the pins on the circuit board then reassembled. you can do it your self or give the circuit board to a technician to do it for you.

I don't know if it work yet but i will try on my car. Good luck for you and me.

Note: this guy claim that he already fixed 3-4 with 100% successful. You can go to toyota owner club to check it out.

Aug 13, 2012 | 2006 Toyota Highlander

1 Answer

Allow the factory toyota nav system to display DVD while moving?


You have to look up how your dvd is wired and give it a new ground since i am sure it only works while in park.

Mar 09, 2009 | 2008 Toyota Tundra

2 Answers

2006 Navigation SYstem DVD stuck


remove all wood grain and plastic

Jul 26, 2008 | 2006 Toyota Highlander

Not finding what you are looking for?
2004 Toyota Prius Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...