Question about 1996 Chrysler Town & Country

1 Answer

Fuel pump is not getting any power, fuses are good as well as the relays. Whats next?? Thanks, Kevin

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 277 Answers

Remove gastank and replace fuelpump

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2001 grand marquis not getting power across relays for fuel pump. changed pump, relay, and computer. still nothing


Check fuses #1 #2 #9 #10 #11 #12 in the battery junction box under the hood to make sure they are good

2001-grand-marquis-not-getting-power-0mjk1nw4aqo52z33ebnvxua0-3-0.gif Check fuse #8 in the central fuse box inside the car

2001-grand-marquis-not-getting-power-0mjk1nw4aqo52z33ebnvxua0-3-1.gif

Feb 14, 2016 | 2001 Mercury Grand Marquis LS

1 Answer

1986 fuel pump swich


check your fuel pump fuse

Jun 28, 2012 | Chevrolet C3500 Cars & Trucks

1 Answer

No power to fuel pump or pump fuse on a 1996 saturn sl1. whats up?


The fuel pump fuse gets its power from the fuel pump relay, which is located in the Instrument Panel Junction Block.

The fuel pump relay gets its ground from G102, which is located just forward of the left strut tower.

The fuel pump relay gets its power from the Powertrain Control Module Connector "C" Pin 10 ( DARK GREEN/ WHITE wire) for the primary side of the relay.

The sencondary side (the side that provides power to the fuel pump fuse) of the fuel pump relay gets its power from the IP BATT Fuse (30 Amp) HOT AT ALL TIMES in the underhood fuse block.

This should be enough information to figure out why your fuel pump is not getting power. Let me know what you find.

Apr 14, 2012 | Saturn SL1 Cars & Trucks

1 Answer

No power on fuel pump in buick century 93, i changed the relay & fuse is ok, that always happen after the car became hot ,next day it wont start


If the fuse and relay is good, and there is power AT the pump, then the pump is bad. Fuel pump power goes through the oil pressure switch but only after engine is running. So there should be power to the pump for approx 2 seconds when you turn key on. There is a RED wire (prime, it will be a single wire poking out near relay) at the fuel pump relay, if you put 12V on that wire the pump should run, IF the wires and pump is good. The GRAY wire powers the pump.

Aug 04, 2011 | 1993 Buick Century

1 Answer

I am not getting a signal to my fuel pump, fuel pump relay nor the 10 amp fuel pump relay fuse. I have checked my wiring from the ECM to the FPR and it is good. Where does the power come from through the...


The fuel pump relay is powered by a fusible link connected to the starter solenoid on the positive battery terminal. That fusible link feeds the 10 amp fuse near the relay. You can test the fusible links with a 12 volt test lamp. If the fusible link test okay check for an open circuit in the wire between the link and the 10 amp fuse. Hope this gets you fixed.

Jul 01, 2011 | 1987 Chevrolet Corvette

1 Answer

1988 chev silverado v6 no power going to the fuel pump. i checked for power where it plugs into the fuel pump on top of the tank and i got no power. what actions can i take to get power


check all ur fuses for continuity first, then u can also try to swap out ur fuel pump relay with another relay that looks jus like it, be sure to use a relay like for ur horn or ac relay something that wont affect necessary or direct engine circuits like for ex. an ecm fuse or bcm fuse. if fuses r good an swappin relays wont work, next is to trace bak from fuel pump ur wires an possibly keep back probing to see if u have a broken wire from relay box to pump . good luck hope this was helpful . in ur fusebox ur fuelpump fuse should b labeled or easily found in fuse box legend, most likely on bak of fusebox cover....

May 15, 2011 | 1988 Chevrolet Silverado 2500

3 Answers

No power to fuel pump on 1999 crown victoria


Hello abzalkhan193
Heres a few things to check that could cut power to the fuel pump. The fuel pump inertia shutoff sw
in the trunk on the left side, there is a reset button on the switch if you push the button down and
you hear/feel a click then the switch was tripped and you just reset it. The switch's job is to cut off
the fuel in case of an accident. Next, the fuel pump fuse located in the battery fuse block under the
hood on the right fender well, fuse #1 20amp fuse. Next, the fuel pump relay, the relay is located in
relay center on the left fender well. Hope this is helpful.

Mar 11, 2011 | 2001 Ford Crown Victoria

1 Answer

Fuel pump


A quick way to check and ensure that the relay is the fault is too bridge the relay which will activate the pump continuously.

The relay is located in the engine bay and is in the fuse/relay plate box on the upper right (if looking at engine from front). You will then see 3 relays on the left hand side of the box and the fuel pump relay is the front one of those 3.

Remove the relay and you'll then see a 3x3 grid of pin inserts that look like "+". Now number these '+' like on a phone keypad and using a pin or any conducter small enough to fit into the inserts bridge the inserts 4 & 8.

E.g

+ + +
4 + + - Fuel pump relay
+ 8 +

This will cause the fuel pump to run on full time, determining the relay as being faulty. Let me know how it goes and il guide through the next step if unsuccessful. If so then you could be looking at possibly wiring faults or more! Best start with the cheapest option I think!

Hope this helps!

May 05, 2009 | 1994 BMW 3 Series

1 Answer

New relay an new fuel pump no fire goin to fuel pump


Check fuel pump fuse, remember fuse send power to relay and relay sends power to pump, Check power wires to pump and make sure FUEL PUMP FUSE IS GOOD if not replace and take care of this problem. Good luck and thanks for using FIX YA.

Mar 25, 2009 | 1990 Ford F150

1 Answer

1996 CADILLAC DEVILLE, NO POWER TO FUEL PUMP


Check for a burned fusible link under the hood. If you have power at the fuel pump relay, you could have a bad ignition switch or bad oil pressure switch...accordianman

Dec 15, 2008 | 1996 Cadillac DeVille

Not finding what you are looking for?
1996 Chrysler Town & Country Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...