Question about 2002 Oldsmobile Bravada
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
the most common cause of this is the key, to check this use another working key, if the problem persists the ignition lock cylinder sensor is defective and the lock cylinder must be replaced, the dealer will need to do this as the security system must be re-programed to accept the new key code.
Posted on Feb 09, 2009
SOURCE: security system-passlock
I hav a 1995 88 w/ same problem. Key was worn out, Had Security system disabled.by installing a resistor to by pass Sec. System.Had it done for $35.00 Check locally for a starter/alternator shop in your area.
Posted on Feb 22, 2009
SOURCE: Turn key, nothing happens
It could be the park/neutral switch, next time it doesn't start try wiggling the shifter in park while turning the key, or shift to neutral and see if that will work. if that doesn't change the problem I would replace the ignition switch.
Posted on Mar 20, 2009
check the wires connected to hte shift interlock switch in the center console. They are probably broken just where they enter the connector. In order to turn the car off remove the plasict plug on the steering column shroud located just below the ignition switch. Pry it out with a small knife point or screwdriver and insert the end of a suitable tool in to release the soleniod. Turn the key while pushing up on the tool. I had the same issue with my Bravada.
Posted on May 08, 2009
Tips for a great answer:
Feb 03, 2016 | 2002 Oldsmobile Bravada
Dec 17, 2010 | 1998 Oldsmobile Bravada
Dec 04, 2010 | 2002 Oldsmobile Bravada
Nov 08, 2010 | 2002 Oldsmobile Bravada
Oct 25, 2010 | 2000 Oldsmobile Bravada
Nov 12, 2009 | 1999 Oldsmobile Bravada
Nov 13, 2017 | 1993 Oldsmobile Bravada
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: