Question about Nissan Titan

1 Answer

Just to know where is evap canister vent valve of 2005 nissan titan 5.6 located , is it under the car exactly beside fuel tank or at engine block?

Posted by on

  • Anonymous Mar 31, 2014

    CAN'T PUT GAS IN, IT ALSO RUNS LIKE IT HAS A VAPER LOCK SPUTTERING LIKE ITS NOT GETTING GAS

  • Anonymous Mar 31, 2014

    RUNS LIKE IT HAS A VAPERLOCK

×

Ad

1 Answer

I believe on the canister by the fuel tank,if similar to the frontier.
Should be easy to crawl under and find.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is purge sensor located


There is no such thing , What code do you have if any ? There is a purge solenoid for the EVAP system ! evaporative emission system. An there is a vent solenoid , a fuel tank pressure (FTP) sensor.
The evaporative emission (EVAP) control system limits fuel vapors from escaping into the atmosphere. Fuel tank vapors are allowed to move from the fuel tank, due to pressure in the tank, through the vapor pipe, into the EVAP canister. Carbon in the canister absorbs and stores the fuel vapors. Excess pressure is vented through the vent line and EVAP vent valve to atmosphere. The EVAP canister stores the fuel vapors until the engine is able to use them. At an appropriate time, the control module will command the EVAP purge valve ON, open, allowing engine vacuum to be applied to the EVAP canister. With the EVAP vent valve OFF, open, fresh air will be drawn through the valve and vent line to the EVAP canister. Fresh air is drawn through the canister, pulling fuel vapors from the carbon. The air/fuel vapor mixture continues through the EVAP purge pipe and EVAP purge valve into the intake manifold to be consumed during normal combustion. The control module uses several tests to determine if the EVAP system is leaking.

Jul 26, 2016 | GMC Sierra Cars & Trucks

1 Answer

2007. What are the probable causes of DTC P0446?


DTC P0446: Evaporative Emissions (EVAP) Vent System Performance
Circuit/System Description
This DTC tests the evaporative emission (EVAP) system for a restricted or blocked EVAP vent path. The control module commands the EVAP canister purge solenoid valve Open and the EVAP canister vent solenoid valve Closed. This allows vacuum to be applied to the EVAP system. Once a calibrated vacuum level has been reached, the control module commands the EVAP canister purge solenoid valve Closed and the EVAP canister vent solenoid valve Open. The control module monitors the fuel tank pressure (FTP) sensor for a decrease in vacuum. If the vacuum does not decrease to near 0 inch H2O in a calibrated time, this DTC sets.
Diagnostic Aids
?€¢
An intermittent condition could be caused by a damaged EVAP vent housing, a temporary blockage at the EVAP canister vent solenoid valve inlet, or a pinched vent hose. A blockage in the vent system will also cause a poor fuel fill problem.


?€¢
An EVAP canister, vent hose, or vent solenoid valve that has restricted flow may cause this DTC to set. Using a purge solenoid command with a scan tool will allow vacuum to be applied to the system instead of pressure. With the engine running, the EVAP canister vent solenoid valve open, and the EVAP canister purge solenoid valve commanded to 100 percent, the fuel tank vacuum should not increase to more than 5 inches H2O.


?€¢
An EVAP canister filter that is restricted can cause this DTC to set. Refer to Evaporative Emission Canister Replacement .


?€¢
Disconnecting one component at a time while the EVAP system is under flow will help to pinpoint a restriction in the system


Do you have a scan tool that reads data PID'S ?
Your FTP - fuel tank pressure sensor could be at fault !

    Ignition ON and fuel cap removed, verify that the FTP sensor parameter is between 1.3-1.7 volts. ?‡'
    If not within the specified range, go to the FTP sensor section in Circuit/System Testing.

  1. Install the fuel cap.
  2. With the engine running, the EVAP canister vent solenoid valve open, and the EVAP canister purge solenoid valve commanded to 100 percent, the fuel tank vacuum should not increase to more than 12 inches H2O.
?‡'
If the fuel tank vacuum is greater than the specified range, go to the restriction section in Circuit/System Testing.



If

Sep 06, 2015 | Chevrolet Impala Cars & Trucks

1 Answer

I have nissan xtrail 2005 code p1446 what is my problem


Trouble Code: P1446

EVAP Canister Vent Valve Malfunction (Closed)

Possible Causes:


EVAP canister vent control valve is damaged or has failed.EVAP canister vent control valve rubber tube is blocked.EVAP control system pressure sensor is damaged or has failed.EVAP water separator is damaged or has failed.EVAP canister is saturated with water.Click here to see the suspected parts to check out.

Jan 29, 2013 | 2005 Nissan X-Trail 2.5i

1 Answer

How do I resolve diagnostic code P0455 on my 2005 Chevrolet Tahoe?


Here is the definition and possible causes.

Possible causes - Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0455 CHEVROLET Description This diagnosis detects leaks in the Evaporative Emission System (EVAP) purge line using engine intake manifold vacuum. If pressure does not increase, the Engine Control Module (ECM) will check for leaks in the line between the fuel tank and EVAP canister purge volume control solenoid valve under the following vacuum test condition.


The vacuum cut valve bypass valve is opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP canister vent control valve will then be closed to shut the EVAP purge line off. The EVAP canister purge volume control solenoid valve is opened to depressurize the EVAP purge line using intake manifold vacuum. After this depressurization is implemented, the EVAP canister purge volume control solenoid valve will be closed.
Read more: http://engine-codes.com/p0455_chevrolet.html#ixzz24fVfq0Bx

Aug 26, 2012 | 2005 Chevrolet Tahoe

1 Answer

Code p1448


P1448 NISSAN - EVAP Canister Vent Control Valve Open

Possible causes- EVAP control system pressure sensor and the circuit
- Blocked rubber tube to EVAP canister vent control valve
- EVAP canister vent control valve
- Water separator
- EVAP canister is saturated with waterWhen is the code detected?EVAP canister vent control valve remains open under specified driving conditions.

Jun 08, 2012 | 1998 Nissan Frontier

1 Answer

Service engine soon light came on, replaced gas cap it went off but a week later it came back on, when it try to fuel the truck it spill the gas back out like it is a full tank


One of the most common causes, is blockage in the venting system from fuel entering the vent lines and into the charcoal canister, the fuel gets absorbed by the charcoal canister causing it to swell and block vent lines. the gas tank contains both fuel and air. when you fill it up the gas displaces the air and the air has to go somewhere. but the air that is displaced is full of gas vapor so the gas vapor goes to the vent lines and into the charcoal canister, when the charcoal canister swells up it prevents the air from escaping the tank, canister could be clogged,canister filter may need replacement,electrical connection to the close valve may be open,canisterf might be damaged,purge valve from canister might be clogged,vent hoses might be clogged, the vent hose could be clogged, or the vent hose may have a kink. all this is caused by overfilling the gas tank, getting that last drop of gas in the neck of the fill tube.
good luck!

Aug 11, 2011 | 2005 Nissan Titan

2 Answers

Ford escort wagon 1997 code p1443 displayed. what does this indicate & where is the cannister? thank you.


P1443 - EVAP Control System / Vacuum System Purge Control Solenoid Or Purge Control Valve Fault. A fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge (fuel vapor) flow at less than 0.02 pounds per minute.

Possible Causes:
  • Blocked fuel vapor hose between the EVAP canister purge valve and the FTP sensor.
  • Blocked fuel vapor hose between the EVAP canister purge valve and the engine intake manifold.
  • Blocked vacuum hose between the EVAP canister purge valve solenoid and the engine intake manifold.
  • EVAP canister purge valve stuck closed (mechanically).

  • Possible Solution:
    Check for blockages between the fuel tank, the EVAP canister purge valve, and the engine intake manifold. Check for obstructions in the EVAP canister purge valve diaphragm and ports.

    The canister is on the passengers side near the firewall if I recall correctly.

    Jan 18, 2011 | Ford Escort Cars & Trucks

    2 Answers

    Codigo p1440


    EVAP System Vent Circuit Malfunction

    This diagnosis detects leaks in the Evaporative Emission (EVAP) purge line using of vapor pressure in the fuel tank. The EVAP canister vent control valve is closed to shut the EVAP purge line. The vacuum cut valve bypass valve will then be opened to clear the line between the fuel tank and the EVAP canister purge volume control solenoid valve. The EVAP control system pressure sensor can now monitor the pressure inside the fuel tank. If pressure increases, the Engine Control Module (ECM) will check for leaks in the line between the vacuum cut valve and EVAP canister purge volume control solenoid valve.

    Possible causes
    - Incorrect fuel tank vacuum relief valve
    - Incorrect fuel filler cap used
    - Fuel filler cap remains open or fails to close
    - Foreign matter caught in fuel filler cap
    - Leak is in line between intake manifold and EVAP canister purge volume control solenoid valve
    - Foreign matter caught in EVAP canister vent control valve
    - EVAP canister or fuel tank leaks
    - EVAP purge line (pipe and rubber tube) leaks
    - EVAP purge line rubber tube bent
    - Blocked or bent rubber tube to EVAP control system pressure sensor
    - Loose or disconnected rubber tube
    - EVAP canister vent control valve and the circuit
    - O-ring of EVAP canister vent control valve is missing or damaged
    - EVAP canister is saturated with water
    - EVAP control system pressure sensor
    - Absolute pressure sensor

    Possible solution
    - Loose fuel filler cap
    - Leaking fuel filler cap


    Hope helps (remember to rate this answer).

    Jan 05, 2011 | 2000 Hyundai Sonata

    3 Answers

    Po446 evap vent code where is the evap vent located


    Some might have an ses p0446, evap emissions vent circuit low. If you take it to the dealer they want 300-400.00 to fix the problem. GM has a service bulletin on this condition and have the updated part for 180.00, thats suppose to eliminate this issue.

    Basically the problem is, the evap purge vent valve gets clogged with dirt, especially if the truck is used in dirty conditions. Well I figured there had to be a cheaper way to cure this problem.

    Here it is:
    1) find the location of the vent valve; its under the truck, locate the charcoal canister on the front of the gas tank and trace the vent line to the vent valve.
    2) Take the bracket loose with a 5/8 wrench.
    3) Spin the valve around so the side with the hole is facing you.
    4) Take an air compressor and blow the vent valve out.
    5) reinstall and clear the code and it's fixed.

    Now I know the updated part from gm is supposed to keep the valve from clogging ever again, but why spend the money when all you have to do is blow out the vent valve every 50k-100kmi and save your $$$!

    Subject: DTC P0446 (Restricted/Blocked EVAP Vent Path) Set, Service Engine Soon (SES) Lamp Illuminated (Replace Hose/Evaporative Emission (EVAP) Canister Vent Asm) #02-06-04-037A - (02/02/2005)
    Models:
    - 1999-2003 Chevrolet Silverado Models
    - 1999-2003 GMC Sierra Models
    --------------------------------------------------------------------------------
    This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 02-06-04-037 (Section 06 -- Engine/Propulsion System).
    --------------------------------------------------------------------------------
    Condition
    Some customers whose vehicles are operated in dusty type environments, such as farming or mining off-road type applications, may comment about the illumination of the instrument panel SES light, with a DTC of P0446 (Restricted/Blocked EVAP Vent Path) being set.

    Cause
    Dirt and dust intrusion into the EVAP canister vent hose assembly, resulting in restricted air flow, may cause this condition.

    Part Number 15086429 Hose Asm-Evap Emis Cnstr Vent


    Removal & Installation
    Purge Solenoid Valve-2.2L (L61) Engine
    1. Disconnect the evaporative emission (EVAP) canister purge valve harness connector.
    2. Disconnect the vacuum pipe from the EVAP canister purge valve.
    3. Disconnect the purge pipe from the EVAP canister purge valve.
    4. Remove the EVAP canister purge valve and bracket.
    5. Remove the EVAP canister purge valve from the purge bracket.
    6. Inspect for carbon release in the EVAP canister purge valve ports.
    To install:
    1. Install the EVAP canister purge valve on to the purge bracket.
    2. Install the EVAP canister purge valve and bracket. Tighten the purge bracket nut to 71 inch lbs. (8 Nm).
    3. Connect the purge pipe to the EVAP canister purge valve.
    4. Connect the vacuum pipe to the EVAP canister purge valve.
    5. Connect the EVAP canister purge valve harness connector.
    6. Remove the air cleaner outlet resonator.
    7. Disconnect the EVAP canister purge valve harness connector.
    8. Disconnect the engine purge pipe from the EVAP canister purge valve.
    9. Disconnect the engine vacuum pipe from the EVAP canister purge valve.
    10. Remove the EVAP canister purge valve mounting bracket attaching bolt.
    11. Remove the EVAP canister purge valve along with the mounting bracket.
    12. Installation is the reverse of the removal procedure. Tighten the bracket bolts to 71 inch lbs. (8 Nm).

    Purge Solenoid Valve-2.4L Engines
    1. Remove the front purge pipe from the evaporative emission (EVAP) canister purge valve.
    2. Remove the rear purge pipe from the EVAP canister purge valve.
      NOTE The EVAP canister may have released carbon particles, which caused this part to fail, and may cause damage to other components. Check the EVAP canister for loose carbon before returning the vehicle to service.
    3. Disconnect the EVAP canister purge valve electrical connector.
    4. Insert a screwdriver between the EVAP canister purge valve and the mounting bracket in order to release the lock tab.
    5. Remove the EVAP canister purge valve mounting bracket attaching nut, if replacing the bracket.
    6. Remove the bracket.
    To install:
    1. Install the mounting bracket and the attaching nut for the EVAP canister purge valve. Tighten the nut to 71 inch lbs. (8 Nm).
    2. Slide the EVAP canister purge valve onto the mounting bracket. Make sure the lock tab locks the valve in place.
    3. Connect the EVAP canister purge valve electrical connector.
    4. Connect the rear purge pipe to the EVAP canister purge valve.
    5. Connect the front purge pipe to the EVAP canister purge valve.

    Vent Solenoid Valve-2.2L & 2.4L Engines
    1. Raise the vehicle
    2. Loosen the EVAP canister vent valve hose clamp and slide the clamp down the hose away from the EVAP vent valve hose connection.
    3. Remove the hose from the EVAP canister vent valve.
    4. Remove the EVAP canister vent valve by placing a pry bar between the valve and mounting surface, and moving the valve forward.
    5. Remove the clip from the EVAP canister vent valve harness connector
    6. Disconnect the EVAP canister vent valve harness connector.
    To install:
    1. Connect the EVAP canister vent valve harness connector
    2. Install the clip into the EVAP canister vent valve harness connector.
    3. Install the EVAP canister vent valve by pushing the mounts into the original holes.
    4. Lubricate the hose end with lubricant.
    5. Install the hose to the EVAP canister vent valve.
    6. Slide the EVAP canister vent valve hose clamp down on to the hose connection at the EVAP canister vent valve.
    7. Lower the vehicle.

    Hope this help (remember commetn and rated this).

    Apr 21, 2010 | 2000 GMC Jimmy

    1 Answer

    Hi my 2005 Chevrolet Tahoe seems to have a blocked fuel vent .When I try to fill it I can hear a whistling and the fuel keeps backing up in the filler neck . Do yoy have any drawings for the routing or...



    There may be a problem with your EVAP system.Dirt/dust can get into the system causing a poor fill condition.Replacement of EVAP canister and or vent solenoid may be required.
    The canister and vent solenoid are located near the gas tank on the passenger side under the vehicle.


    • Fuel fill limiter vent valve stuck closed • Evaporative emission (EVAP) canister restricted • EVAP vent valve stuck closed • Hose between canister and canister vent solenoid twisted or kinked if applicable • High fuel temperature • Fuel filler hose is kinked

    Nov 01, 2009 | 2005 Chevrolet Tahoe

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    302 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nissan Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Phil Lovisek
    Phil Lovisek

    Level 3 Expert

    726 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Are you a Nissan Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...