Question about 2007 Infiniti G35 Sedan Sport Sedan

1 Answer

I changed my battery and now my window auto-up does not work but my auto-down works. How do I fix this?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Your vehicle has an anti pinch feature for auto up so your fingers or a childs neck is not harmed. It is possible 1 of 2 things has happened, either the module was damaged when you changed the battery, or in some models this was a programmable feature. So heres what I would do, look in the owners manual and see if its programmable which will be a simple task of cycling the key on and off and operating the window button or you can call your dealer and ask for the readers digest version...if your model is not programmable I would first try to remove the negative battery post for 1 minute with the key off and OUT of the ignition and then reinstall the cable and then insert your key, start the car and then try the window...failing that you will need to have your window control module replaced or re flashed by the dealer.

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power window switch for Mazda 3 2009.


check connections and test switch if bad replace

Sep 18, 2016 | Mazda 3 Cars & Trucks

1 Answer

Auto window on driver seat was working good before i got the battery changed. what can be the problem of not working now


Likely needs window motor to learn where fully UP is and fully DOWN is.

This is often accomplished by running window down and holding window switch fully down for 5 seconds.

Now fully up and do same. This should allow window motor to now know where Up and Down limits are.

Sep 13, 2011 | 2005 Mazda 6

1 Answer

Hi, i have lexus RX400h 2008, and yesterday i changed the small battery, in the car. after that when i tried to open/close the windows from my seat, i faced a problem, so i cant open/close the windows...


first take main battery cable out for one houre and return it back if there fine so its oke if not do below steps plz
set in car and close or glasses 1st- open ur window full auto and close it auto 2st-open passenger full auto down and full auto up 3st-open ur back window full auto down and then full auto up 4st-open rear window of passenger full auto down and full auto up
hope this will work if not tray same steps twice it will reprogrm
let me know plz if still

Jun 21, 2011 | 2006 Lexus RX400h Used Cars

2 Answers

I change the battery on my 2007 Toyota Avalon but now the Passenger side window will not operate from the driver side only works on the passenger side also the sunroof will not open automatically you have...


to reset any window open it half way down then
let it fully close and hold the button up for about 10 seconds. do this mithod to all auto windows encloding the sunroof . afterall try them from the driver side

Jan 26, 2011 | 2007 Toyota Avalon

4 Answers

2006 Toyota Avalon- Changed the battery and the driver side button to roll the passenger side window down doesn't work. The remainder of the buttons work, just not that single button. The passenger side...


try going to passenger door window switch and reset it by going down and holding for extra 3to5 seconds after window is down, do same to go up, then try doing it with master switch don forget to hold it longer, this is a reset also used on Scion vehicles, hope it helps.
Good luck

Jan 09, 2011 | 2005 Toyota Avalon

2 Answers

How to reset the electric windows "Auto" function - battery exch.


Dear Madam or Sir,

you re-initialise the system by moving the window upwards and hold the button for four seconds. Then move down the window and hold the button for another four seconds. Turn ignition off , wait two seconds. Now the auto function should be operable.

Jun 26, 2010 | Honda Fit Cars & Trucks

6 Answers

2006 Pontiac G6 GTP window auto close/open


OMG. I replaced the battery in my 06 G6 and had the same problem. the windows would not roll up or down how they did before. I read the answers on here and it does work. Hold up the window switch for ten seconds and it resets. You will have to do it to each window. Worked great. Thanks

Dec 31, 2009 | 2006 Pontiac G6

1 Answer

Auto down window function stopped workin after new battery


Close the window all the way, hold the up button for about 3 seconds, release and check if auto close/open is working.
Do the same to the passenger window.

Regards
Phillip

Sep 18, 2009 | Mazda MAZDA6 Cars & Trucks

2 Answers

I took my 2006 Mazda 6 in for an oil change yesterday. The mechanic said when he tried to start the car to back it out of the garage, the car would not start. He checked the battery and said it had a bad...


Usually the autodown feature needs to be reprogrammed. there are usually 2 ways of doing this. First, roll the window down and hold the switch down for a about 5 seconds and then roll the window up and hold for about 5 seconds. Repeat if it does work just to make sure. The other way is to hold the switch up for 5 seconds and try holding down the switch for 5 seconds.

Jul 31, 2009 | 2006 Mazda 6

1 Answer

Driver window auto down and up not working after replaced the bat


You have to press and hold the window button till it's unwound all the way down then hold it for a further 2 seconds, do the same with it on the up setting - this will reset the auto switch. Worked on my Accord after I changed the battery.

regards
Richard

Feb 23, 2009 | 2004 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...