Question about 1994 Ford Ranger Supercab

1 Answer

My 1994 ford ranger ... the starter cranks.. but if the check engine light does not come on... it doesnt start... when the light comes on.. it starts... Intermittent... what do I check ??

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem and it's so simple a fix. It's the Fuel Relay Fuse located in the fusebox in the engine compartment on the driver side. Take It costs like $13 and is the same as the AC relay. Next time it happens pop the AC fuse in it's place.

Posted on Aug 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I replaced my starter on my 94 ford ranger. my truck won't start, when it cranks, it makes a loud grinding noise. How can I fix this problem?


When buying starter motors it is essential that the starter pinion teeth are of the same pitch as the flywheel ring gear. Not all starters from the same make fit different engines because of this problem. However I would be checking that I had put the starter in the housing properly as any misalignment will cause your problem

Apr 25, 2014 | 1994 Ford Ranger Supercab

1 Answer

Starting problems with 1994 Ford Ranger


My 1994 ranger was having intermitent starting issues where sometimes I would just hear a click but no turn over and sometimes would die while cranking up. I replaced battery terminals and couple relays with no luck. Only to find out the wire that goes from the battery to the starter was corroded at the connection right before the starter, I replaced this connector and problem solved.
5_17_2017_9_33_04_pm.jpg

Jun 25, 2012 | Ford Cars & Trucks

3 Answers

94 Ford Ranger won't start. Replaced starter and solenoid and battery checks okay. Suspect a ground problem. Where do I begin?


To start, why did you replace the starter? Was it bad? Did you have it checked? Is the new one good? And what is the battery reading in Volts? Does it click at all, crank at all? Did you check the fusible link? Follow the hot wire from the battery to the link, a giant fuse type thing, check it out. Is the ground wire from the battery bolted to the frame or body, and engine? Is the starter connected right? Are the terminals on the battery posts squeaky clean? they have to be or it won't do anything. Check the electrolyte fluid and see what the gravity of each cell is. The battery with one weak cell is a dead duck. The voltage should be at 13.5 at all times. The posts have got to be clean and tight, the starter should at least click. Do you have an anti-theft device somewhere in there you forgot about? Check it out. Hope this helps.

Oct 21, 2010 | 1994 Ford Ranger Supercab

1 Answer

1994 ranger 2.3L 5spd, w a/c. replaced fuel


Only way to check the timing belt is to remove cover, When was last time belt was replaced, timing belt should be replaced every 50,000 miles, shound like that would be next thing to check

Feb 07, 2010 | 1994 Ford Ranger Supercab

2 Answers

Turn the key on and the starter will not engage.


check fuel pressure.if not above recomended spec. replace fuel pump. for starting have solenoid 0n starter checked.

Jan 26, 2009 | 1994 Cadillac Fleetwood

1 Answer

Truck Won't Start At All


before replacing the starter get a volt meter and test the voltage coming out of the voltage regulator which the power comes from the battery to the regulator down to the starter also make sure all wires on the starter are clean and what I mean is from rust because I had an f150 that did the same thing

Nov 18, 2008 | 2003 Ford Ranger Regular Cab

1 Answer

1994 ford ranger starter


I believe there is two solenoids on this vehicle. one on the starter and one on the right side fender area under the hood. Make sure this other solenoid is not bad.

Oct 26, 2008 | 1994 Ford Ranger Supercab

1 Answer

1993 ford ranger starter turns won't crank


Youll have to take it out and check the condition of the ring gear through the starter hole use mirror and torch if you have to.Before taking the starter out turn engine over by hand to a different position then try to start with key.Try this several times if it doesnt work first time Why was the original starter replaced.Im assuming the starter you brought was reconditioned or new Did you check that the battery is still ok?

Jul 20, 2008 | 1993 Ford Escort 4 Door

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...