Question about 1995 Buick Riviera
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Transmitter Programming Procedure
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder.
Press and hold the door unlock switch.
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on the transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of the transmitter.
Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter mode.
Operate the transmitter functions in order to verify correct system operation.
Posted on Jun 25, 2009
SOURCE: Serpentine Belt
Generally there is a sticker under the hood, showing belt routing. If not, get a cheap (usually under $20) manual... not only will you learn belt routing, but tips on tensioner adjustment, necessary to replace belt. Even a cheap manual includes lots of stuff you may need to know in the future!
Posted on Dec 26, 2008
traction switch is located next to drivers left knee on bottom of dash....you should be able to turn off the traction light there by just turning on the traction control.....the security light is telling you that there is a problem with your security system....could just need a new key with a new computer chip....make sure the key is clean and dry when using so it can read the chip....the security light comes on whenever your start the car and stays on for approximatley 2 minutes and then should go out....it is just a reminder....try this and see if it works....lock the door using the power switch on door.....close door and see if the security light comes on....watch and it should go out after about 2 minutes...if it does then your alarm is activated and working....to disarm you need to unlock the driver door with the key...anything else will set the alarm off and the lights will start flashing and the horn honking...after you set the alarm off you will always have to use the key to unlock the drivers door to turn off the alarm and reset the security system.
Posted on Aug 11, 2009
Tips for a great answer:
Feb 23, 2018 | Buick Cars & Trucks
Oct 20, 2014 | 2013 Buick - LaCrosse
Aug 28, 2014 | 1999 Buick Park Avenue
Aug 23, 2010 | 1995 Buick Riviera
Apr 05, 2010 | 1995 Buick Riviera
Jun 19, 2009 | 1995 Buick Riviera
Mar 10, 2009 | 1997 Buick Riviera
Nov 25, 2008 | 1998 Buick Riviera
920 people viewed this question
Usually answered in minutes!