Question about 1989 Jeep Wrangler

Open Question

1989 jeep wrangler yj. the steering turn on the left up to 10mph. I went to the steering alignment center technitian and they said to my that my jeep is perfect alignment , toe caster camber,and all front wheel steering parts are in good state includding bushings arm stopers etc, but it stills turn on the left itself, can you give and orientation to solves this problem , thanks

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: caster adjustment for 1990 jeep yj wrangler

caster is adjusted at the rear of the lower control arms. Camber is fixed and cannot be adjusted by normal means (though special off-set ball joints are available to do that) Toe in is adjusted by turning the sleeves in or out on the tie rod ends. None of this should be done at home though crude adjustments can be made in order to get the front end reasonably straight. Adjustments are made on an alignment machine that allows precise adjustments to all you mentioned as well as front/rear tracking.

Posted on Mar 12, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 wrangler yj 4 cyl manual steering does not turn short enough to left, ok to right, (maybe too far right). Hit pole front right hard enough to break leaf spring. Bought this way to repair. Is now...


it could be the axle pushed back on one side. i don't think that is it though.the steering box most of the time jumps time. if it did it will turn say 4 turns one way and like 2 turn the other way from center.change steering box it will fix the problem!

Sep 16, 2011 | 1989 Jeep Wrangler

1 Answer

Caster adjustment for 1990 jeep yj wrangler


caster is adjusted at the rear of the lower control arms. Camber is fixed and cannot be adjusted by normal means (though special off-set ball joints are available to do that) Toe in is adjusted by turning the sleeves in or out on the tie rod ends. None of this should be done at home though crude adjustments can be made in order to get the front end reasonably straight. Adjustments are made on an alignment machine that allows precise adjustments to all you mentioned as well as front/rear tracking.

Mar 12, 2010 | 1990 Jeep Wrangler

1 Answer

Looking for schematic 1989 wrangler yj interior lighting


heres a wiring diagram of the interior compartment, i circled the lihgts. hope this is helpful.feb945a.gif

Feb 05, 2010 | 1989 Jeep Wrangler

2 Answers

Too much play in the steering wheel


My jeep wrangler wobbles like it needs an alignment.been off roading though. how do i fix it

Nov 18, 2009 | 1989 Jeep Wrangler

1 Answer

Drag link adjustmnet


Your desctiption sounds like your settings are incorrect. I reccomend that an alignment shop adjust for you.

A common mistake on this type of project is steering box centerning. to test, from straight ahead, stop.., turn wheel from dead center to the stop, and measure exactly how many turns. From dead center, it must be the same both ways.

Steering boxes have an exact center setting, and get looser (so to speak) as turned right or left off of that spot. SOOO, if set to one side or the other, steering gets tighter when turning in one direction as compared to the other.

Get an alignment shop to set this up, it is common problem.

Sep 07, 2009 | 2000 Jeep Wrangler

3 Answers

Looking for Service Repair Manual Jeep Wrangler YJ


i have a 1988 jeep wrangler 6cyl with 5 speed transmission. I was shifting the jeep and it got stuck in third gear. We opened it up and saw that the linkage is aligned and everything is in place. I dont know what is wrong and what to do next. please help ....

Jul 10, 2009 | 1992 Jeep Wrangler

2 Answers

I need to change the turn signal assembly on a 1989 jeep wrangler


This is a big job you better be prepaired for a long time doing it if u are not familiar with doing it.it is hard to do.but if u are mecanical u can do it

Jun 10, 2009 | 1989 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...