Question about 2001 Mitsubishi Galant
Go to Pep Boys or Auto Zone and buy the bulbs from them and they will change it for you. thats how i do it!
Posted on Mar 04, 2012
Your bulb is held on by a spring clip that goes around the base of the bulb. The plug on the back is hard to remove because you do not want to pull too hard and damage the spring clip. Using a trouble light or flash light to see, grab the rubber tab and peel the rubber cover back far enough to see the spring. Now locate tab on the end of the spring that is under neath the catch and slide the spring off the catch. Now you can pull the bulb out of the housing and get a good grip on it to pull the wire plug off the back.Grab the new bulb by the base being careful not to touch the glass of the bulb. Do Not Get Any Grease or Dirt on the Bulb. Place the bulb in the headlight, reattach the spring clip, put on the rubber cover, and plug in the wire harness. If you do get the bulb dirty or touch it by accident just wash it with some clean drying alcohol before installation.
Posted on Aug 05, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.
Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.
Grab the bulb and pull it from the socket with a slight wiggling motion.
Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.
Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.
Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.
Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed. Close the Galant's hood.
Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe
Close the Galant's hood.
Sep 27, 2012 | 2000 Mitsubishi Galant
Feb 20, 2011 | 2001 Mitsubishi Galant
Apr 16, 2010 | 2001 Mitsubishi Galant
Jan 22, 2010 | 2001 Mitsubishi Galant
Oct 25, 2009 | 2003 Mitsubishi Galant
Mar 04, 2009 | 2001 Mitsubishi Galant
Mar 02, 2009 | 2001 Mitsubishi Galant
Jul 08, 2008 | 2001 Mitsubishi Galant
182 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: