Question about 1993 Dodge Grand Caravan

1 Answer

Abs light and brake light constantly on, on dash board and there's no power brakes,

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Your abs brake fluid pump has stopped working. It is located underneath the brake master cylinder / reservoir. There are two large brake fluid hoses that go from the reservoir to the pump under neath. Some times you can take a pipe (or metal rod) and a hammer, place the rod against the body of the pump and tap it a couple of times while the car motor is running. If it comes back to life you will hear the classic buzz of the ABS brakes as is builds up pressure. If it still does not work you will have to replace it . I got lucky and picked up a cheap one at the salvage yard for $10 . New or used expect to pay a lot more. It has one mounting bolt on the transmission, one multi-wire plug, and two brake fluid hoses with hollow bolts. Changing out the pump is not too bad. You do have to follow the instructions on top of the master cylinder reservoir to fill and bleed the system after the install.

Posted on Aug 05, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fixed my ABS brakes by replacing two brake lines. Now I get ABS light on dash.Need to erase light. Fixd diagnostics said all is good. Just need to get light off for ABS.

Did you bleed the brakes after you replaced the 2 brake lines. Did you breed the brakes with or with out the power on.The right way to bleed brakes with abs is with thew power off. you will need a abs scan tool and re bleed the brakes

Aug 21, 2017 | Cars & Trucks

1 Answer

What is the problem when braking characteristics appears in the dash board?

Brake light could be low fluid or E brake handle not fully released. Brake,ABS,and VSC light on, Most likely the ABS module or pump has died. ABS and VSC lights on, could be transmission problems. Best to have the codes read.

Dec 11, 2016 | Cars & Trucks

2 Answers

My brake light on my dash is constantly on

Look beneath the dash panel at brake pedal assembly. You should see the brake light switch, which completes a circuit to brake lights when you step on the brake pedal. Its likely this switch is malfunctioning. The circuit is closed (power to brake lights) when the brake pedal is not depressed. The circuit is suppose to be open (no power to brake lights) when your foot is off the brake pedal. Unplug the wire connector and unscrew to replace this brake light switch.

As for the knocking sound, is it when the vehicle is in motion? Or even when the vehicle is stopped and idling in park?07060338-db0d-4c14-8a08-ace846c99fb4.jpg

Nov 29, 2013 | 1995 Mazda 626

1 Answer


Hello, welcome to Fixya!

The ABS and brake lights on your dash board is cause by low brake fluid/oil level. When the brake fluid/level of your vehicle is low, the ABS light and brake light will appear on your dash board, indicating that it needs to be checked.

So open your bonnet and check the brake fluid/oil and make sure it is not low. The brake fluid/oil is the first that needs to be checked in a situation like this.

If the above appears not to be the problem, please let me know.


Nov 17, 2011 | Cars & Trucks

1 Answer

The abs light on my nissan wingroad 2004 model is constantly staying on the dash board. Also, the speedometer is not working and when I mash a sudden brakes the car swerves at the back.

Hi, This means your ABS is not working at all, first check out your fuses before anything else, next bleed the ABS system or even the brakes as this means air has got into the system! Check any leaking brake fluid from pressure hoses. Please leave me feedback thanks, Malcolm Campbell.

Aug 22, 2011 | 2006 Nissan Z

3 Answers

S type jag 2003 abs warning light on dash board is

Check your brake fluid level first. If it is fine then you probably have a bad abs brake sensor.

Mar 20, 2010 | 2003 Jaguar S-Type

2 Answers

Check trans light power

My brake lights are out, the back, reverse, and head lights all work. My steering is fine as well as my brakes. But the warning lights for brake and ABS light up on my dash board

Feb 17, 2010 | 1992 Isuzu Trooper

1 Answer

Dash board parking brake and ABS lights stay

you have an abs fault. have your abs system scanned for codes.

your base brakes will continue to function normally

Apr 13, 2009 | 2002 Chevrolet Suburban 2500

2 Answers

ABS and brake light are on in dash, how to diag problem?

sound like you have a bad brake caliper if you keep driving it it will lock up and you will be stuck it will start smoking soon

Dec 03, 2008 | 1993 Chevrolet Astro

Not finding what you are looking for?
1993 Dodge Grand Caravan Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81423 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides