Question about 2007 Mercedes-Benz ML320 CDI

1 Answer

I have a 7/08 ml-320 cdi mercedes, series 164, i have just had the brakes done because the brake wear warning showed up on the dash, at the time i was not near any dealer ( traveling ) so had it done by a local guy, no problems with the brakes but need to get rid of the warning on the dash, thanks in advance steve

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The brake pads have a hole in the rear pad driver side. the sensor plugs down into this hole. mechanic may not have put it back in. front pads have clip that comes off pad. shouldn't have been able to miss it or where it plugs in to . its pretty obvious. it should be on driver side pad also. if the sensors are plugged in it could be a faulty sensor, wiring, relay, etc. would have to take and hook up to computer

Posted on Aug 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mercedes ml 270 cdi 2002 and when I move off from a stand still I get the dash lit up like a Christmas tree with abs/epc/bas and warning triangle along with brake light and goes into limp mode, I...


Sounds like you have a speed sensor problem. Possibly input or output shaft speed sensor on transmission. You will need to find out what fault codes are being set and proceed from there.

Nov 05, 2014 | 2001 Mercedes-Benz ML 270

1 Answer

Brake lights are stuck on all the time. 320 2002 Mercedes


You have a simple plunger switch on the brake pedal. This can be lubricated or replaced. Simple job.

Nov 30, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Re-setting service indicator on ml 320 2008


This Can Be DONE BY Disconnecting Battery For 5-10 Mins.

Jun 01, 2009 | 2007 Mercedes-Benz C230 Sedan

3 Answers

My Mercedes ML 270 cdi ABS etc lights and gearbox.


  • you need a Brake safety switch replaced.This is located behind you brake pedal.it's a common problem. The warning lights will reset after a few engine starts.

May 18, 2009 | 2002 Mercedes-Benz M-Class

1 Answer

320 Ml Mercedes-Benz


Go to advance auto or auto zone and have the do a trouble code read ( it is free).
The plug is located under the drivers side dash to the left of the brake pedal.
Press the esp off button on the dash and see if ithas an effect. on acceleration

Next I would try this it is expensive.
If it feels like it is bogged down when you first start to acceleratewill only creep about 10 to 20mph it may be the mass flow sensor located between the air filter and the throttle body. It has an electrical connection. Sand eats them up and it is a common item about $200.

Mar 08, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Rest the brake light on 2003 e 320 mercedes


it can't be done unless dealer does it, if your breakes been done, you may have the sensors issue

Jan 13, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

Break lining wear


that warning is telling you the brake pads are approaching replacement time. have them inpected and will probably need service. i dont think you will lose your brakes, but have checked asap

Nov 16, 2008 | 1998 Mercedes-Benz E-Class

Not finding what you are looking for?
2007 Mercedes-Benz ML320 CDI Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...